2012.12.27_KATALOG_2013_ENG_wydanie_1 ... - SaMASZ Sp. z oo

Snow Plows
SNOW PLOWS
All PSV Snow Plows have been equipped with spring inclined clearing
bars placedin the blade’s lower section.
Such solution enables cushioning of the machine if an obstacle is hit,
while switching offensive angle to negative value and slipping the plow
above the obstacle. PSV 161 - 271 Plows have clearing bar, which is
is divided to two modules. These retract independently backwards,
whenever the obstacle is driven onto. PSV 301 Plows have clearing bar,
which is divided into four parts to retract it backwards.
Cat II. Cat I.
Cat I/II.
with free
holders
SMS
Euro
Custom
plate
Optional hitches for PSV Plows
Standard equipment:
- Steel (Hardox) or rubber clearing bar
- Hydraulically controlled shield
- Safety device - inclined blades
- Overload hitch protection
(sheer bolt connection)
- Hitch onto tractor’s front
3-point linkage Cat II/
Euro/SMS/Custom plate
- Warning flag mounting possible
- Clearance lights LED 12 - 24V
- Electric connector 12V
- Support leg
- Safety bumpers
Hitch frames for
telescopic loaders:
- Avant
- Manitou
- JCB
- Weidemann
- Schäffer
Accessories:
- Additional rubber or
steel (Hardox) bar
- Support wheels - set
- Slides - set
- Küper’s slides - set
- Flags with clamps - set
PSV 231
PSV 271
PSV 301
233
202
80 / 94
273
235
80 / 96
303
262
80 / 98
O
up to 30
TUZ II
O
up to 30
TUZ II
O
up to 30
TUZ II
103 / 233
360
103 / 273
430
103 / 303
480
53