2012.12.27_KATALOG_2013_ENG_wydanie_1 ... - SaMASZ Sp. z oo

Snow Blower
Tornado 250
Tornado 250 Snow Blower is designed for
operating on either front or rear tractor’s
3-point linkage with power of more than 90
HP. Removes and blows snow for distance of
up to 30 m and it is possible to be loaded onto
a vehicle or a trailer.
Advantages:
- Mounting plow either at tractor’s front or rear is possible
- Smooth hydraulic control of blowpipe’s rotation angle within 360°
range
- Mountable on both West- and East-European manufactured tractors
(right or left PTO shaft rears)
- Transport catterpillar equipped with HARDOX steel sheet caps
- Safety device for caterpillar locking - PTO shaft with friction clutch
Tornado 250 on rear linkage
Tornado 250 on front linkage
Standard equipment:
- Hardox steel clearing bar
- Hydraulically controlled blowpipe’s turn angle
- Hydraulically controlled snow blowing distance
- Overload clutch
- Hitch onto either front or right tractor’s 3-point linkage Cat II
- Adjusted to either left or right PTO rears
- Slides
Type
Operating width: [cm]
Operating height [cm]
Operating speed [km/h]
Suggested PTO rpm
Tractor’s power [HP]
Snow blowing direction
Snow blowing distance [m]
3-point linkage hitch Cat.
length / width /height [cm]
Weight [kg]
Tornado 250
250
100
up to 3
540/750
90
O
360
5 - 30
II
140/255/230
890
Extendable blowpipe as an option
62