Summit® WM3400 Wireless LAN Controller ... - Extreme Networks
Summit® WM3400 Wireless LAN Controller ... - Extreme Networks
Summit® WM3400 Wireless LAN Controller ... - Extreme Networks
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
LED Codes<br />
System Status 1 LED System Status 2 LED Event<br />
System Boot Up Error<br />
Alternating Green<br />
Blinking & Amber<br />
Blinking<br />
Alternating Green<br />
Blinking & Amber<br />
Blinking<br />
NOTE<br />
During controller start up, the Temperature status LED will be lit Solid Amber. This is normal<br />
behavior and does not indicate an error. At the completion of start up the Temperature Status LED<br />
will switch to Solid Green.<br />
<strong>Controller</strong> Status (Primary System)<br />
System Status 1 LED System Status 2 LED Event<br />
Off Off Power off<br />
Green Solid Off No Redundancy Feature Enabled<br />
Primary System Normal Operation<br />
No Access Points adopted<br />
Green Solid Green Solid Redundancy Feature Enabled<br />
Primary system normal operation<br />
Actively adopting Access Points<br />
Green Solid Amber Blinking No Country Code configured on the<br />
controller<br />
or<br />
AP capacity License and Country Code<br />
configured, but no APs adopted<br />
<strong>Controller</strong> Status (Redundant System)<br />
System Status 1 LED System Status 2 LED Event<br />
Off Off Power off<br />
Green Solid Off Redundant System normal operation<br />
Green Blinking Green Solid Redundant System failed over and<br />
adopting APs<br />
12<br />
Summit <strong>WM3400</strong> <strong>Wireless</strong> <strong>LAN</strong> <strong>Controller</strong> Installation Guide