2.1.3 Port-based VLAN - VOLKTEK Ethernet & fiber

More documents

Recommendations

Info

2.1.12 802.1x Before you enable the 802.1x function, contact the administrator of RADIUS server to get IP address, UDP port number and secret. 22
2.1.13 PoE status and command operation PoE status definitions: Non-PD: The connected device is an <strong>Ethernet</strong> device but not a PD device. No Load: No device has been connected to this port. Loaded: A PD device was connected, and class level and allocated power would be displayed. PD Error: Current was overloaded (exceed 350 mA), and this port had been disabled automatically. Dedicated class: Display the class level of PD device. Allocated power: Maximum allocated power. 23
Page 1 and 2: 8-Port Gigabit Web Smart Switch NSH
Page 3 and 4: 1 Introduction The NSH-9308P Switch
Page 5 and 6: 1.2 Start to Manage This Switch Use
Page 7 and 8: 2.1 Configurations 2.1.1 System inf
Page 9 and 10: 2.1.2 Ports Port status page always
Page 11 and 12: 2.1.4 Tag-based VLAN Tag-based VLAN
Page 13 and 14: 2.1.5 Port Trunking Port Trunking d
Page 15: 2.1.7 Quality of Service QoS (Quali
Page 18 and 19: 2.1.9 LACP Different from the stati
Page 20 and 21: You can modify the following parame
Page 24 and 25: 2.2 Monitoring 2.2.1. Port Statisti
Page 26 and 27: 2.2.5 IGMP Status Select “IGMP St
Page 28 and 29: 2.3.4 Config File Click “Backup
Page 30 and 31: System Configuration [all] System R

2.1.3 Port-based VLAN - VOLKTEK Ethernet & fiber

Create successful ePaper yourself

Delete template?

Save as template?