2.1.3 Port-based VLAN - VOLKTEK Ethernet & fiber

More documents

Recommendations

Info

2.2.5 IGMP Status Select “IGMP Status” to display information about IGMP. 2.2.6 Ping Use this tool to test reach ability to a remote host. 26
2.3 Maintenance 2.3.1 Warm Reboot Reboot system remotely, without changing current configuration. 2.3.2 Factory Default Reset system configuration to default value, all of modified configuration will be lost. 2.3.3 Firmware Update Click “Browse…” to select firmware residing in your desktop or other network device, then press “Upload“ to upgrade system firmware. 27
Page 1 and 2: 8-Port Gigabit Web Smart Switch NSH
Page 3 and 4: 1 Introduction The NSH-9308P Switch
Page 5 and 6: 1.2 Start to Manage This Switch Use
Page 7 and 8: 2.1 Configurations 2.1.1 System inf
Page 9 and 10: 2.1.2 Ports Port status page always
Page 11 and 12: 2.1.4 Tag-based VLAN Tag-based VLAN
Page 13 and 14: 2.1.5 Port Trunking Port Trunking d
Page 15: 2.1.7 Quality of Service QoS (Quali
Page 18 and 19: 2.1.9 LACP Different from the stati
Page 20 and 21: You can modify the following parame
Page 22 and 23: 2.1.12 802.1x Before you enable the
Page 24 and 25: 2.2 Monitoring 2.2.1. Port Statisti
Page 28 and 29: 2.3.4 Config File Click “Backup
Page 30 and 31: System Configuration [all] System R

2.1.3 Port-based VLAN - VOLKTEK Ethernet & fiber

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?