100 mm

Visual signaling devices
Flashing warning lights 5 Joules
WBL-M / WBS-M
• flashing light with integrated fl ash monitoring and fault message
contact
• for systems with safety-relevant applications, such as X-ray and
laser equipment
• housing and fi xing bracket made of sturdy anodised aluminium
• also available with GL approval
• ideally suited for tough industrial environments
• fl ash tube secured by additional steel clamp
• impact-proof lens
r =
11 m
Range as
per EN 54
IP 54
Protection
system
+ 55 °C
- 20 °C
Operating
temperature
Electrical data WBL-M WBS-M
Rated voltage 230 V AC 42 V AC 48 V DC 24 V DC 12 V DC
Rated frequency 50 Hz / 60 Hz 50 Hz / 60 Hz
Operating range 185 V – 242 V 37 V – 47 V 40 V – 57 V 18 V – 35 V 10 V – 15 V
Nominal current consumption 0.07 A 0.50 A 0.18 W 0.25 A 0.60 A
Switching capacity of the faiure indication
Switching voltage
Switching current
max. 250 V AC
max. 3 A
Mechanical data
WBx-M
Flash rate
1 Hz = 60 fl ashes/min.
Flash energy
5 Joules
Light intensity (DIN 5037) clear lens 44 cd
Lens colours
clear, white, yellow, amber, red, green, blue
Operating temperature - 20 °C ... + 55 °C
Storage temperature - 40 °C ... + 70 °C
Relative humidity 90 %
Protection system according to EN 60529
IP 54 (vertical mounting)
Duty cycle 100 %
Service life of the flash tube light emission still 70 % after 8,000,000 fl ashes
lens
polycarbonate (PC)
Material
housing
aluminium (Al Mg Si 1), yellow anodised
base
polycarbonate (PC) with fi bre glass
Cable entry M20 x 1.5
Connecting terminals single wire 0.5 = 2.5 mm 2 , fi ne wire 0.5 = 1.5 mm 2 , with wire end ferrules DIN 46228/1
Weight
700 g
110
www.pfannenberg.com