100 mm

ELECTRO-TECHNOLOGY FOR INDUSTRY
Dimensions
P 200 FLF
P 100 FLF
15
25
35.5
65.5
Blinking Lights
Ø 60
Plug terminal
connector
Panel cut-out
21.23
37.5
16
Thread
PG29
25
80
Ø 60
17.5
36
Mounting holes
2 x Ø 4.5 mm
15
Cable entry
Ø 8 mm
Ordering details
Article numbers P 200 FLF P 100 FLF
Lens colour Rated voltage 230 V AC 115 V AC 24 V DC 230 V AC 115 V AC 24 V DC
yellow 213 21 10 3 000 213 21 15 3 000 213 21 80 3 000 213 11 10 3 000 213 11 15 3 000 213 11 80 3 000
amber 213 21 10 4 000 213 21 15 4 000 213 21 80 4 000 213 11 10 4 000 213 11 15 4 000 213 11 80 4 000
red 213 21 10 5 000 213 21 15 5 000 213 21 80 5 000 213 11 10 5 000 213 11 15 5 000 213 11 80 5 000
Article numbers for other colours on request
Options / accessories
Wall
bracket
only for
P 200 FLF
Tubular
stand
137 mm
only for
P 200 FLF
Wall
holder
only in
combination
with tubular
stand
See pages 120/121 for
further information
Article number:
213 90 00 0 000
Article number:
213 91 00 0 000
Article number:
282 50 20 0 000
Light source
Conformity to standards
The visual characteristics of blinking lights conform to the European standard DIN EN 842: ‘Machine safety – visual alarm signals’.
Requirements contained in the DIN EN 981 standard: ‘Machine safety – system of acoustic and visual alarm and information signals’, can be fulfilled.
The colours ‘red’ for the emergency signal and ‘yellow’ for the warning signal conform to the requirements of IEC 73 / DIN EN 60073 / VDE 0199:
‘Coding of display devices and control elements using colours and supplementary means’.
References to visual alarm devices can be found in the following standards:
EN 60825-1 Radiation safety of laser devices, identical to IEC 825 and DIN-VDE 0837
DIN EN 54
Fire alarm systems
DIN 54113-2 Radiation protection regulations for the technical operation of X-ray equipment up to 500 kV
Further technical information can be found on our website at www.pfannenberg.com
75