100 mm

Visual signaling devices
SPECTRA series LED multifunction lights
P 400 LDA (Ø 140 mm) / P 300 LDA (Ø 100 mm)
• LED multifunction lights for extreme requirements
• energy-saving and durable thanks to the use of maintenance-free
LED technology
• as standard with on-site selectable signalling mode (9 different modes)
• externally switchable signaling mode (for DC versions only)
• large variety of mounting methods due to modular design principle:
– surface-mounted devices for mounting directly or on a wall bracket
or a tubular stand
– also for exposed installation locations through combination of
wall bracket and tubular stand
P 400 LDA
r =
9 m
Range as
per EN 54
P 300 LDA
r =
7 m
Range as
per EN 54
IP 65
Protection
system
+ 50 °C
- 25 °C
Operating
temperature
– cable entry at the side or through the base of the housing
• durable, sturdy and functionally reliable due to the use of
high-quality plastic
• optimum illumination due to prismatic coloured lens
Electrical data P 400 LDA P 300 LDA
Rated voltage 115 V AC 230 V AC 12 / 24 V DC 115 / 230 V AC 12 / 24 V DC
Operating range 100 V – 130 V 207 V – 253 V 10 V – 50 V 90 V – 253 V 10 V – 50 V
Nominal current consumption 140 mA 70 mA 400 mA @ 24 V DC
90 mA @ 115 V AC
50 mA @ 230 V AC
Mechanical data P 400 LDA P 300 LDA
Operating mode
LED multifunction light with 9 internally selectable operating modes
Light source high output LED array
Light intensity (DIN 5037) clear lens 30 cd 20 cd
Lens colours
Lens type
yellow, amber, red, green, blue
prismatic
Operating temperature - 25 °C ... + 50 °C
Relative humidity 90 % @ + 20 °C
Protection system according to EN 60529 IP 65
Service life of light source > 50.000 hrs
Material
Design
Mounting
Cable entry
polycarbonate (PC), UL 94 VO f1
bayonet with anti-tamper locking screw
surface mounting (wall bracket and tubular stand available as accessories)
1 x 5-7 mm push through grommet (bottom side); 2 x M20 cable entries sideways
Connecting terminals screw terminals 1.5 mm 2
Weight
AC version 595 g 285 g
DC version 845 g 285 g
Operation modes Stage 1: internally selectable, stages 2 & 3 externally controllable (DC lights only)
P 400 LDA
P 300 LDA
130 mA @ 24 V DC
Mode Stage 1 Stage 2 (DC only) Stage 3 (DC only) Stage 1 Stage 2 (DC only)
1 all LEDs on alternating fl ash 2 Hz double fl ash 2 Hz all LEDs on alternating fl ash 2 Hz
2 rotation: slow “on” alternating fl ash 2 Hz all LEDs on rotation: slow “on” alternating fl ash 2 Hz
3 single fl ash 2Hz rotation: fast “off” all LEDs on single fl ash 2 Hz rotation: fast “off”
4 rotation: fast “on” single fl ash 2 Hz all LEDs on rotation: fast “on” single fl ash 2 Hz
5 rotation: slow “off” double fl ash 1 Hz all LEDs on rotation: slow “off” double fl ash 1 Hz
6 double fl ash 1 Hz rotation: fast “off” all LEDs on double fl ash 1 Hz rotation: fast “off”
7 rotation: fast “off” double fl ash 2 Hz all LEDs on rotation: fast “off” double fl ash 2 Hz
8 double fl ash 2 Hz alternating fl ash 2 Hz double fl ash 2 Hz alternating fl ash 2 Hz all LEDs on
9 alternating fl ash 2 Hz rotation: schnell “off” alternating fl ash 2 Hz rotation: fast “off” all LEDs on
78
www.pfannenberg.com