510Sr owner's manual cover 24Oct10 - Diamondback Fitness
510Sr owner's manual cover 24Oct10 - Diamondback Fitness
510Sr owner's manual cover 24Oct10 - Diamondback Fitness
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
ASSEMBLY INSTRUCTIONS<br />
1. Unpack the <strong>510Sr</strong> from the carton.<br />
Please recycle.<br />
2. Verify the carton contains all parts<br />
from the list.<br />
3. Remove the short section of steel<br />
tubing from the front stabilizer<br />
receiver by removing the two (2)<br />
Allen fixing bolts with the enclosed<br />
wrench. Discard this item.<br />
4. Align the front stabilizer assembly (K) with the receiver mounted to the frame and<br />
loosely install two (2) sets of the Allen bolt and curved washer assemblies (I‐2 & I‐3)<br />
through frame and into the front stabilizer (K).<br />
5. Loosely install two (2) sets of the Allen bolt and flat washer assemblies (I‐2 & I‐5)<br />
through the underside of the frame receiver and into front stabilizer (K).<br />
6. Align the rear stabilizer (L) with the frame and loosely install two (2) sets of Allen bolt<br />
and curved washer assemblies (I‐2 & I‐3) through frame and into the rear stabilizer (L).<br />
7. Loosely install two (2) sets of Allen bolt and flat washer assemblies (I‐2 & I‐5) through<br />
underside of the frame receiver and into rear stabilizer (L).<br />
8. Tighten all eight (8) Allen bolts (I‐2) firmly with the provided Allen wrench to fix the<br />
front and rear stabilizers.<br />
10