Brooks Instrument 1350E and 1355E User Manual - The Meter and ...

More documents

Recommendations

Info

Section 2 Installation Models 1350E and 1355E Installation and Operation Manual X-VA-1350E-eng Part Number: 541B082AAG April, 2009 Model 1355E-V (Valve Inlet ) 8.81 224 (Cartridge Open) 8.81 224 (Cartridge Open) Model 1355E-VB (Valve Inlet with Aluminum Bezel) 2-6 Figure 2-4 Dimensions - Sho-Rate 1355E
Installation and Operation Manual X-VA-1350E-eng Part Number: 541B082AAG April, 2009 Section 3 Operation Models 1350E and 1355E 3-1 Operation After the flowmeter has been installed in the flow system, it is ready for operation. An optional built-in needle control valve may be provided to control the flow through the flowmeter. These control valves are designed for fine control. Excessive tightening may damage the valve seat and limit its effectiveness as a control valve. If tight shut-off is required, it is recommended that a separate shut-off valve should be installed in the line immediately before the flowmeter. Flow indication is measured using the center of the spherical float as the reference point. 3-1
Page 1 and 2: Installation and Operation Manual X
Page 17: Installation and Operation Manual X

Brooks Instrument 1350E and 1355E User Manual - The Meter and ...

Create successful ePaper yourself

Delete template?

Save as template?