Send MMS Message - Now SMS

After the Modem is added, there are additional Properties that can be configured for the
modem connection. Highlight the modem name in the "SMSC" list, and press the
"Properties" button:
The "Phone Number" field is used to tell NowSMS the phone number associated with this
modem. It is not mandatory to supply a phone number, however if a phone number is
specified, it will be possible to submit messages to the gateway in such a way that if
multiple SMSC or GSM modem connections are defined, the message will be sent out via
this connection. (This is possible by including a "Sender" parameter in a URL request to
submit a message, where the value of this parameter matches the "Phone Number" field
configured for a specific GSM modem. For more information, refer to Submitting SMS
Messages - URL Parameters on page 170.) When receiving SMS or MMS messages, the
phone number will be supplied as the receiving address of the message, allowing
applications to determine which modem received the message in an installation with
multiple GSM modem connections.
A Modem PIN is a 4-digit code that is used for security purposes. If a PIN is configured on
the SIM card installed in the modem, the phone or modem cannot be used until the PIN is
entered. If you want the gateway to automatically supply the PIN to the modem upon
startup, supply this PIN in the "Modem PIN" field.
The "SMS Access" setting specifies whether SMS messages should be sent by the modem
over the circuit-switched or packet-switched network. This setting is not limited to GSM
Now SMS/MMS Gateway 2007 31
© Copyright 2002-2007 by Now Wireless Limited, All Rights Reserved