Diffusion Manual Outline

27
d16
p1 ph4
GRADIENT2(cnst23)
d16
d30
4u BLKGRAD
p1 ph5
go=2 ph31
d1 wr #0 if #0 zd
lo to 3 times td1
exit
ph1= 0
ph2= 0 0 2 2
ph3= 0 0 0 0 2 2 2 2 1 1 1 1 3 3 3 3
ph4= 0 2 0 2 2 0 2 0 1 3 1 3 3 1 3 1
ph5= 0 0 0 0 2 2 2 2 1 1 1 1 3 3 3 3
ph31=0 2 2 0 2 0 0 2 3 1 1 3 1 3 3 1
;pl1 : f1 channel - power level for pulse (default)
;p1 : f1 channel - 90 degree high power pulse
;p2 : f1 channel - 180 degree high power pulse
;p16: gradient pulse (little DELTA)
;p19: gradient pulse 2 (spoil gradient)
;d1 : relaxation delay; 1-5 * T1
;d16: delay for gradient recovery
;d20: diffusion time (big DELTA)
;d21: eddy current delay (Te)
[5 ms]
;d30: d21 - p19 - d16 - 4u
;d31: d20 - p1*2 - p2 - p16*2 - d16*2 - p19 - d16
;l20: dummy scans (ds)
;NS: 8 * n
;DS: l20
;td1: number of experiments
;MC2: use xf2 and ilt for processing
;use gradient program (GRDPROG) : Ledbp2s
;use gradient ratio: cnst22 : cnst23
; -13.17 : -17.13
;use AU-program dosy or dosyq to calculate gradient-file dramp
The acquisition parameters are described at the end of the pulse sequence.
P1 and pl1 are the 1 H 90º pulse width and power level
P16 is the duration of the encoding/decoding gradient which should be set to ½ the value
of used in the ledgs2s pulse program
P19 is the duration of the spoiler gradient (1-3ms)
D16 is the gradient recovery time (500us)
D20 is the length of the diffusion time
D21 is the length of the eddy current delay
Cnst21 represents the gradient strength of the encoding/decoding gradient. The value of
cnst21 varies according to the starting and ending strength and the number of
experiments indicated in the dosy au program that helps you to set up the experiment.
Cnst22 and cnst23 are the gradient strength of the spoiler gradients and are usually set to
an odd number to diminish the chances of refocusing unwanted magnetization.
The gradient program associated with this experiment is Ledbp2s and is shown below:
Ledbp2s