You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Playset Assembly Instructions<br />
Fig. 11<br />
3/8’’ Hole Locations<br />
(2) Wood<br />
Loc Washers<br />
D. <strong>Swing</strong> Beam Hole Locations<br />
1. Install <strong>Swing</strong> Hangers into swing beam at<br />
locations shown.<br />
Note: You will need to drill (2) 3/8'' holes in<br />
your <strong>Swing</strong> Beam using the 3/8'' drill bit<br />
included with your kit. See (Fig. 11) for the<br />
proper location of these holes.<br />
94''<br />
26-1/2''<br />
Note:<br />
You will need to drill these<br />
two holes in your <strong>Swing</strong><br />
Beam.<br />
15''<br />
11-1/2''<br />
11-1/2''<br />
3-1/2''<br />
20