Helvar Lighting Controls 2013/14
Helvar Lighting Controls 2013/14
Helvar Lighting Controls 2013/14
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
458-Series Installation Information<br />
For detailed information please refer to 458-series intallation guides available at www.helvar.com/downloads<br />
Remove the cover of the 458 chassis.<br />
Mount the 458 chassis on the wall.<br />
*Note: Minimum clearance of 50 mm required ALL sides<br />
for ventilation and cooling (i)<br />
Make the mains input and channel load connections.<br />
The by-pass terminals provide default out-of-box<br />
operation to the channel loads.<br />
Place the blanking plate on the chassis.<br />
The 458 chassis is now ready and provides basic<br />
switching through its MCB’s.<br />
Remove the cover of the 458 chassis and connect the<br />
458 control module(s).<br />
Plug the by-pass connectors into the control module(s).<br />
Make the DALI or S-DIM data connection.<br />
Place the cover back on the chassis.<br />
Commission the basic settings of the 458 control<br />
module(s).<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 020 1 02/08/<strong>2013</strong> 37
Change language