Helvar Lighting Controls 2013/14
Helvar Lighting Controls 2013/14
Helvar Lighting Controls 2013/14
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Input Unit (440)<br />
The Input Unit is a fully DALI-compatible interface, designed<br />
to allow customer specified switches, sensors, time clocks or<br />
other on/off control devices to be incorporated into a DIGIDIM<br />
lighting control system. It has 8 volt-free inputs which may<br />
be either momentary or latching, permitting the selection of<br />
DALI commands.<br />
Key Features<br />
• Status LED<br />
• Out of box operation<br />
• Physical/Mode selection switch<br />
• Can be used with momentary or latching switches<br />
• DIGIDIM / DALI<br />
Note: Not compatible with 905, 910 or 920 Routers.<br />
Technical Data<br />
DALI consumption: 10 mA<br />
Overload protection: ±35 V<br />
Short-circuit current: 0.5 mA maximum<br />
Debounce period: 50 ms<br />
Ambient temperature: 0…40 °C<br />
Relative humidity: 90 % max, non-condensing<br />
Isolation:<br />
4 kV (from DALI)<br />
Dimensions<br />
45 mm<br />
90 mm<br />
70 mm 58 mm<br />
Product Order Code: 440<br />
DIN-rail case 4U-wide. Weight 110 g<br />
Connections<br />
* 50 m max cable length<br />
DA+<br />
DA-<br />
DALI<br />
The screen (SC) connection must be<br />
connected to earth to ensure correct<br />
operation.<br />
DA+<br />
DALI<br />
DA-<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 034 1 02/08/<strong>2013</strong> 61