SASH LOCK - Truth Hardware
SASH LOCK - Truth Hardware
SASH LOCK - Truth Hardware
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Connecting Innovations In <strong>Hardware</strong> With Windows,<br />
Patio Doors, And Skylights.
sliding<br />
windowhardware<br />
catalog<br />
doublehung/singlehungproducts
Sliding Window <strong>Hardware</strong> Catalog<br />
TABLE OF CONTENTS<br />
Page No.<br />
Product Line / Description<br />
1..................700 Series - 700 Series Locks & Keepers<br />
2 ............Recess Mount - Recess Mount Locks<br />
3................7538 Series - Sash Lock & Keeper<br />
4................9200 Series - Sash Lock & Keepers<br />
5....................17 Series - TrimLine Cam Locks<br />
6...........................Misc. - TrimLine Cam Lock Keepers<br />
7................9400 Series - Sash Lock<br />
8....................17 Series - EntryGard ® II Cam Lock<br />
9...........................Misc. - EntryGard ® Cam Lock Keepers<br />
10..................17 Series - Sash Lock<br />
11 ..................17 Series - Button Lock<br />
12..............9850 Series - 9850 Series “Quick-Snap” Locks<br />
13..............9900 Series - 9900 Series Lock<br />
14..............9950 Series - 9950 Series Locks<br />
15............30590 Series - Cam Gard Series Locks<br />
16..................17 Series - Restoration Lock<br />
17..................19 Series - Positive Action Lock (PAL) System<br />
18..................19 Series - Fusion System<br />
19.........................Misc. - Tilt Latches<br />
20.........................Misc. - Sash Lifts<br />
21.........................Misc. - Window Rollers<br />
22.........................Misc. - Pivot Bars<br />
23.........................Misc. - Miscellaneous<br />
24...............Color Chart - <strong>Hardware</strong> Finishes
TRUTH HARDWARE’S WARRANTY<br />
FOR WINDOW & DOOR MANUFACTURERS &<br />
AUTHORIZED DISTRIBUTORS<br />
All <strong>Truth</strong> <strong>Hardware</strong> products, with the exception of<br />
electrical products*, are warranted against defects in<br />
materials and workmanship for the life of the product.<br />
Industry related testing has defined the typical lifetime<br />
of fenestration hardware to be 10 years.<br />
Terms & Conditions of Sale<br />
defective in materials or workmanship, or negligently<br />
manufactured. This exclusive remedy shall not be<br />
deemed to have failed of its essential purpose so long as<br />
<strong>Truth</strong> <strong>Hardware</strong> is willing and able to repair or replace<br />
said defective products or parts in the prescribed manner.<br />
* All <strong>Truth</strong> <strong>Hardware</strong> electrical products, are warranted for one (1)<br />
year against defects in materials and workmanship.<br />
<strong>Truth</strong> <strong>Hardware</strong>’s warranty is expressly limited to window<br />
& door manufacturers and <strong>Truth</strong> <strong>Hardware</strong> Authorized<br />
Distributors, who purchase <strong>Truth</strong> <strong>Hardware</strong> products for<br />
the purpose of resale, or use in the ordinary course of<br />
the buyers business, and may not be assigned or<br />
transferred.<br />
This warranty does not cover normal wear or<br />
discoloration on finishes, or any product which has<br />
been improperly installed, abused, misused, worn out,<br />
altered, used for a purpose other than that for which it<br />
was intended, or in a manner inconsistent with any<br />
instructions regarding its use, nor does it cover corrosion<br />
related damage. This warranty only covers electrical<br />
products that are used to drive manual hardware<br />
systems (operators and hinges) manufactured by <strong>Truth</strong>.<br />
THIS WARRANTY IS EXCLUSIVE. TRUTH HARDWARE<br />
MAKES NO OTHER WARRANTY OF ANY KIND WHAT-<br />
SOEVER, EXPRESSED OR IMPLIED, WITH RESPECT<br />
TO THE PRODUCTS MANUFACTURED AND SOLD BY<br />
IT, WHETHER AS TO MERCHANTABILITY, FITNESS<br />
FOR A PARTICULAR PURPOSE, OR ANY OTHER<br />
MATTER. No agent, employee or representative of <strong>Truth</strong><br />
<strong>Hardware</strong> has any authority to bind <strong>Truth</strong> <strong>Hardware</strong> to<br />
any affirmation, representation, or warranty concerning<br />
<strong>Truth</strong> <strong>Hardware</strong> products or parts, except stated herein.<br />
If any product manufactured by <strong>Truth</strong> <strong>Hardware</strong> is<br />
found to be defective by <strong>Truth</strong> <strong>Hardware</strong>, in its sole<br />
judgment, <strong>Truth</strong> <strong>Hardware</strong> will, at its option, either repair<br />
or replace such defective product. <strong>Truth</strong>’s liability is<br />
limited only to the replacement value of the hardware.<br />
THIS REMEDY SHALL BE THE EXCLUSIVE REMEDY<br />
AVAILABLE FOR ANY DEFECTS IN THE PRODUCTS<br />
MANUFACTURED AND SOLD BY TRUTH HARDWARE<br />
OR FOR DAMAGES RESULTING FROM ANY OTHER<br />
CAUSE WHATSOEVER, INCLUDING WITHOUT<br />
LIMITATION, TRUTH HARDWARE’S NEGLIGENCE.<br />
TRUTH HARDWARE SHALL NOT IN ANY EVENT BE<br />
LIABLE TO ANY BUYER FOR CONSEQUENTIAL, OR<br />
INCIDENTAL, OR PUNITIVE DAMAGES OF ANY KIND,<br />
OR FOR THE LABOR WHICH MAY BE REQUIRED FOR<br />
THE REPLACEMENT OF SAID PRODUCT, WHETHER<br />
FOR BREACH OF WARRANTY, NEGLIGENCE, ON<br />
THE BASIS OF STRICT LIABILITY, OR FOR ANY<br />
OTHER REASON.<br />
Terms -<br />
1%/10 days - net 30 days on hardware purchases. Net<br />
30 days on freight charges. Tooling invoice terms<br />
available upon request.<br />
Freight -<br />
F.O.B. Factory<br />
Conditions -<br />
Initial orders, and all subsequent orders placed before<br />
credit is established with <strong>Truth</strong> <strong>Hardware</strong>, will be on a<br />
cash-in-advance or C.O.D. basis. Cash-in-advance<br />
orders will be entered by <strong>Truth</strong> <strong>Hardware</strong> upon the<br />
receipt of the order and payment. Pricing is determined<br />
at time of shipment.<br />
Return Goods -<br />
Authorization from our Sales Department is required<br />
in advance for all goods to be returned to <strong>Truth</strong><br />
<strong>Hardware</strong>. Authorization will be granted in all cases<br />
of defective product or incorrect shipments due to an<br />
error on <strong>Truth</strong> <strong>Hardware</strong>ís part. <strong>Truth</strong> <strong>Hardware</strong> may<br />
also, at its option, authorize the return of other goods<br />
subject to a 25% restocking charge and including<br />
and offsetting order equal in value to the amount of<br />
the return. Product considered for return must be<br />
standard product, built to current <strong>Truth</strong> <strong>Hardware</strong><br />
manufacturing specifications, no older than the<br />
immediate past calendar year, clean, resalable, in<br />
full unopened cartons. The quantity to be returned<br />
cannot be excessive based on <strong>Truth</strong> <strong>Hardware</strong>’s<br />
current level of sales and inventory position. Freight<br />
on all return goods must be prepaid to our plant and<br />
merchandise must be received within 30 days of<br />
date of authorization.<br />
The purpose of this exclusive remedy shall be to provide<br />
the window/door manufacturer, or <strong>Truth</strong> <strong>Hardware</strong><br />
Authorized Distributor, with replacement of products,<br />
or parts, manufactured by <strong>Truth</strong> <strong>Hardware</strong> found to be
DOUBLE HUNG<br />
SLIDER<br />
700 SERIES <strong>LOCK</strong>S<br />
<strong>Truth</strong> <strong>Hardware</strong>’s new 700 Series Locks<br />
are by far the most exciting aesthetic<br />
changes that have hit the checkrail<br />
marketplace in years. There are four<br />
new designs within the 700 Series<br />
family of locks - each with its own<br />
distinct appearance. However, as unique<br />
as they each are to the eye, the similarities<br />
in quality features that the 700 Series<br />
have as a whole make these products<br />
the “first family” of check rail locks.<br />
FORGIVING CAM:<br />
The forgiving cam is likely the most<br />
valuable feature that the window<br />
manufacturers will realize. This<br />
patented new innovative design helps<br />
to insure proper engagement between<br />
the lock and keeper even on assemblies<br />
where these two components may be<br />
misaligned. The benefits of this<br />
forgiving cam can help to reduce field<br />
service calls down the road.<br />
SECURITY & RELIABILITY:<br />
The pick-resistant design of these<br />
locks helps you exceed forced entry<br />
requirements.<br />
POSITIVE SECURE ACTION:<br />
An improved detent in both the locking<br />
and unlocking motion of the handle,<br />
assures the homeowner that the cam<br />
has completed its travel.<br />
TIGHTER SEAL:<br />
By pulling meeting rails tightly together<br />
and by producing a better seal of the<br />
sash at the head and sill, the 700 Series<br />
Lock decreases air infiltration. These<br />
locks produce a .105” (2.7mm) lifting<br />
ability (Arc style lock has a .156”<br />
(4.0mm) lifting ability). And with their<br />
new slimmer handle design options,<br />
their low profile design helps assure<br />
maximum egress opening. An<br />
innovative spring design holds the<br />
handle in both the locked and unlocked<br />
positions while a concealed locking<br />
mechanism protects moving parts from<br />
dust and dirt for added lock life.<br />
INTERCHANGEABLE:<br />
Designed for 2.062" (52.4mm) centerto-center<br />
hole spacing on both the lock<br />
and keepers, the 700 Series Locks are<br />
interchangeable with existing designs<br />
making the move up to this new design<br />
virtually seamless.<br />
LOGO OPTIONS:<br />
For that “personalized touch”, most of<br />
<strong>Truth</strong>’s 700 Series Check Rail Locks<br />
are capable of accepting your<br />
company’s name or logo. <strong>Truth</strong>’s<br />
unique custom print logo reproduction<br />
process is an attractive way of<br />
highlighting your company signature.<br />
For further details on the locks that<br />
accept this process, and where your<br />
company’s logo would appear, please<br />
refer to the following drawings.<br />
WARRANTY:<br />
Protected under the terms of the <strong>Truth</strong><br />
Warranty for Window & Door<br />
Manufacturers and Authorized<br />
Distributors. Refer to <strong>Truth</strong>’s Terms &<br />
Conditions for further details.<br />
MATERIAL:<br />
High-pressure, corrosion-resistant,<br />
die-cast zinc.<br />
FINISH:<br />
Electrostatically applied, durable<br />
coatings that provide excellent<br />
resistance to chipping, scratching and<br />
corrosion while maintaining color<br />
stability for years in direct sunlight.<br />
Please refer to <strong>Truth</strong>’s Color Chart for<br />
examples of <strong>Truth</strong>’s most popular<br />
finish options. <strong>Truth</strong> also offers a wide<br />
range of decorative “plated” finishes -<br />
contact <strong>Truth</strong> for additional<br />
information on availability of these<br />
finishes on specific product lines.<br />
ORDERING INFORMATION:<br />
1. Choose the 700 Series Lock style<br />
desired (specify by part number).<br />
2. Order the appropriate Keeper to fit<br />
your lock and window profile (refer to<br />
drawings).<br />
3. Specify finish number.<br />
4. Select screws (fasteners). Sold<br />
separately.<br />
RECOMMENDED SCREWS:<br />
4 - Phillips Flat Head Sheet Metal<br />
Screws. Refer to lock and keeper<br />
drawings for additional specs. (Length<br />
and thread type to be determined by<br />
profile) For further information on<br />
screw selection - see <strong>Truth</strong> Tips.<br />
LOW S <strong>LOCK</strong><br />
ARC <strong>LOCK</strong><br />
DELTA LP1 <strong>LOCK</strong><br />
DELTA LP2 <strong>LOCK</strong><br />
1
700 SERIES <strong>LOCK</strong>S<br />
TRUTH TIPS:<br />
1. When two locks are used on one<br />
window, the placement of each lock,<br />
with respect to its keeper, becomes<br />
very critical to maintain a constant<br />
weatherseal on all sides of the window<br />
and to insure that each lock engages<br />
properly with its keeper.<br />
2. For accurate hardware placement in<br />
vinyl or metal applications, pre-drilling<br />
of the window profile is recommended.<br />
3. For vinyl window applications,<br />
mounting screws should pass through<br />
two PVC walls, or one PVC wall and<br />
one insert wall. For this reason, it may<br />
be necessary to use a longer screw than<br />
is recommended.<br />
4. For metal window profiles, <strong>Truth</strong><br />
recommends stainless steel machine<br />
screws. However, in most applications,<br />
stainless steel sheet metal screws will<br />
provide adequate holding power.<br />
INCLUDE TRUTH SPECS ON<br />
YOUR NEXT WINDOW PROJECT<br />
Window check rail locks shall be<br />
included which will increase both<br />
security and weather seal tightness.<br />
The lock must provide easy operation<br />
and positive locked feel (detent).<br />
Window check rail locks will be of<br />
internal cam design to provide .062"<br />
(4.0 mm) of pull-in to aid in sealing<br />
the meeting rails. The lock and<br />
accompanying keeper will help insure<br />
proper engagement even on assemblies<br />
where these two components may be<br />
misaligned. The lock and keeper shall<br />
be constructed of high pressure zinc<br />
alloy die castings.<br />
Window locks shall be 700 Series<br />
Locks, as manufactured by <strong>Truth</strong><br />
<strong>Hardware</strong>.<br />
FIG. 1 APPLICATION OF 700 SERIES CHECKRAIL <strong>LOCK</strong>S<br />
A<br />
B<br />
<strong>LOCK</strong>ED<br />
POSITION<br />
2.062<br />
[52.4 mm]<br />
AREA AVAILABLE FOR<br />
CUSTOMER LOGO<br />
SURFACE MOUNT KEEPER<br />
APPLICATION<br />
GLASS<br />
CHECKRAIL<br />
FIG. 2 700 SERIES LOW <strong>LOCK</strong><br />
FIG. 2 700 SERIES LOW S <strong>LOCK</strong><br />
2.812<br />
[71.4 mm]<br />
FULL SCALE<br />
C<br />
RECOMMENDED SCREWS:<br />
2.062<br />
[52.4 mm]<br />
AREA AVAILABLE FOR<br />
CUSTOMER LOGO<br />
(QTY 2) #6 PHILLIPS FLAT HEAD SHEET<br />
METAL SCREW. (LENGTH AND THREAD TYPE<br />
TO BE DETERMINED BY PROFILE)<br />
1a<br />
.365<br />
[9.3 mm]<br />
1.000<br />
[25.4 mm]<br />
.510<br />
[13.0 mm]<br />
PRODUCT<br />
NUMBER<br />
A30700400<br />
A30700401<br />
A30700410<br />
CAM PULL-IN: .117[2.9mm]<br />
AVAILABLE<br />
KEEPERS<br />
C30705<br />
C30706<br />
C30705<br />
C30706<br />
C30705<br />
C30706<br />
A<br />
.903 [22.9mm]<br />
.888 [22.5mm]<br />
.653 [16.6mm]<br />
.638 [16.2mm]<br />
.968 [24.6mm]<br />
.953 [24.2mm]<br />
B<br />
.060<br />
[1.5mm]<br />
.060<br />
[1.5mm]<br />
C<br />
.687<br />
[17.4mm]<br />
.437<br />
[11.1mm]<br />
.687<br />
[17.4mm]
700 SERIES <strong>LOCK</strong>S<br />
FIG.<br />
FIG.<br />
3<br />
3<br />
700<br />
700<br />
SERIES<br />
SERIES ARC<br />
ARC<br />
<strong>LOCK</strong><br />
<strong>LOCK</strong><br />
2.700<br />
[68.6 mm]<br />
C<br />
FULL SCALE<br />
RECOMMENDED SCREWS:<br />
(QTY 2) #7 PHILLIPS FLAT<br />
head SHEET METAL SCREWS.<br />
(LENGTH AND THREAD TYPE<br />
TO BE DETERMINED BY PROFILE.)<br />
2.062<br />
[52.4 mm]<br />
.780<br />
[19.8 mm]<br />
AREA AVAILABLE<br />
FOR CUSTOMER<br />
LOGO<br />
1.125<br />
[28.6 mm]<br />
.480<br />
[12.2 mm]<br />
PRODUCT<br />
NUMBER<br />
A30710400<br />
A30710401<br />
A30710402<br />
A30710403<br />
AVAILABLE<br />
KEEPERS<br />
C30715<br />
C30716<br />
C30715<br />
C30716<br />
C30715<br />
C30716<br />
C30715<br />
C30716<br />
CAM<br />
PULL-IN<br />
.070<br />
[1.7mm]<br />
.100<br />
[2.5mm]<br />
A<br />
.903 [22.9mm]<br />
.882 [22.4mm]<br />
.653 [16.6mm]<br />
.632 [16.1mm]<br />
.873 [22.1mm]<br />
.852 [21.6mm]<br />
.623 [15.8mm]<br />
.602 [15.2mm]<br />
B<br />
.060<br />
[1.5mm]<br />
.030<br />
[.7mm]<br />
C<br />
.687<br />
[17.4mm]<br />
.437<br />
[11.1mm]<br />
.687<br />
[17.4mm]<br />
.437<br />
[11.1mm]<br />
FIG. FIG. 44700 700 SERIES DELTA LP1 <strong>LOCK</strong><br />
2.812<br />
[71.4 mm]<br />
FULL SCALE<br />
C<br />
RECOMMENDED SCREWS:<br />
.365<br />
[9.3 mm]<br />
2.062<br />
[52.4 mm]<br />
AREA AVAILABLE FOR<br />
CUSTOMER LOGO<br />
1.000 CAM PULL-IN: .117[2.9mm]<br />
[25.4 mm]<br />
.589<br />
[15.0 mm]<br />
PRODUCT<br />
NUMBER<br />
A30730400<br />
A30730401<br />
(QTY 2) #6 PHILLIPS FLAT<br />
HEAD SHEET METAL SCREWS.<br />
(LENGTH AND THREAD TYPE<br />
TO BE DETERMINED BY PROFILE.)<br />
AVAILABLE<br />
KEEPERS<br />
C30705<br />
C30706<br />
C30705<br />
C30706<br />
A<br />
.903 [22.9mm]<br />
.888 [22.5mm]<br />
.653 [16.6mm]<br />
.638 [16.2mm]<br />
B<br />
B<br />
.060<br />
[1.5mm]<br />
C<br />
.687<br />
[17.4mm]<br />
.437<br />
[11.1mm]<br />
FIG. 5 700 SERIES DELTA LP2 <strong>LOCK</strong><br />
FIG. 5 700 SERIES DELTA LP2 <strong>LOCK</strong><br />
C<br />
2.812<br />
[71.4 mm]<br />
FULL SCALE<br />
RECOMMENDED SCREWS:<br />
.365<br />
[9.3 mm]<br />
2.062<br />
[52.4 mm]<br />
AREA AVAILABLE FOR<br />
CUSTOMER LOGO<br />
1.000 CAM PULL-IN: .117[2.9mm]<br />
[25.4 mm]<br />
PRODUCT AVAILABLE<br />
A<br />
NUMBER KEEPERS<br />
.510<br />
[13.0 mm]<br />
A30720400<br />
A30720401<br />
(QTY 2) #6 PHILLIPS FLAT<br />
HEAD SHEET METAL SCREWS.<br />
(LENGTH AND THREAD TYPE<br />
TO BE DETERMINED BY PROFILE.)<br />
C30705<br />
C30706<br />
C30705<br />
C30706<br />
.903 [22.9mm]<br />
.888 [22.5mm]<br />
.653 [16.6mm]<br />
.638 [16.2mm]<br />
B<br />
.060<br />
[1.5mm]<br />
C<br />
.687<br />
[17.4mm]<br />
.437<br />
[11.1mm]<br />
1b
700 SERIES <strong>LOCK</strong>S<br />
FIG. 6 C C30705 CHECK RAIL RAIL <strong>LOCK</strong> <strong>LOCK</strong> KEEPER KEEPER<br />
2.062<br />
[52.4 mm]<br />
2.812<br />
[71.4 mm]<br />
.156<br />
[4.0 mm]<br />
.375<br />
[9.5 mm]<br />
.365<br />
[9.3 mm]<br />
.312<br />
[7.9 mm]<br />
AVAILABLE<br />
<strong>LOCK</strong>S<br />
A30700400<br />
A30700401<br />
A30700400<br />
A30700401<br />
A30700400<br />
A30700401<br />
A<br />
.903 [22.9mm]<br />
.653 [16.6mm]<br />
.903 [22.9mm]<br />
.653 [16.6mm]<br />
.903 [22.9mm]<br />
.653 [16.6mm]<br />
B<br />
.060<br />
[1.5mm]<br />
RECOMMENDED SCREWS:<br />
(QTY 2) #6 SCREW WITH A #5 HEAD,<br />
PHILLIPS FLAT HEAD SHEET METAL SCREW.<br />
(LENGTH AND THREAD TYPE TO BE<br />
DETERMINED BY PROFILE.)<br />
FIG. 7 C C30706 CHECK RAIL <strong>LOCK</strong> KEEPER<br />
2.062<br />
[52.4 mm]<br />
2.812<br />
[71.4 mm]<br />
.141<br />
[3.6 mm]<br />
.375<br />
[9.5 mm]<br />
AVAILABLE<br />
<strong>LOCK</strong>S<br />
A30700400<br />
A30700401<br />
A30700400<br />
A30700401<br />
A30700400<br />
A30700401<br />
A<br />
.888 [22.5mm]<br />
.638 [16.2mm]<br />
.888 [22.5mm]<br />
.638 [16.2mm]<br />
.888 [22.5mm]<br />
.638 [16.2mm]<br />
RECOMMENDED SCREWS:<br />
B<br />
.060<br />
[1.5mm]<br />
.365<br />
[9.3 mm]<br />
.280<br />
[7.1 mm]<br />
(QTY 2) #6 SCREW WITH A #5 HEAD,<br />
PHILLIPS FLAT HEAD SHEET METAL SCREW.<br />
(LENGTH AND THREAD TYPE TO BE<br />
DETERMINED BY PROFILE.)<br />
FIG. 88 C C30715 CHECK RAIL RAIL <strong>LOCK</strong> <strong>LOCK</strong> KEEPER KEEPER<br />
2.062<br />
[52.4 mm]<br />
2.700<br />
[68.6 mm]<br />
.156<br />
[4.0 mm]<br />
.319<br />
[8.1 mm]<br />
AVAILABLE<br />
<strong>LOCK</strong>S<br />
A30700400<br />
A30700401<br />
A30700400<br />
A30700401<br />
A<br />
.903 [22.9mm]<br />
.653 [16.6mm]<br />
.873 [22.1mm]<br />
.623 [15.8mm]<br />
RECOMMENDED SCREWS:<br />
B<br />
.060<br />
[1.5mm]<br />
.030<br />
[.7mm]<br />
.505<br />
[12.8 mm]<br />
FIG. 9 C C30716 CHECK RAIL RAIL <strong>LOCK</strong> <strong>LOCK</strong> KEEPER KEEPER<br />
2.062<br />
[52.4 mm]<br />
2.700<br />
[68.6 mm]<br />
.135<br />
[3.4 mm]<br />
.319<br />
[8.1 mm]<br />
.505<br />
[12.8 mm]<br />
.312<br />
[7.9 mm]<br />
.270<br />
[6.9 mm]<br />
(QTY 2) #6 PHILLIPS FLAT HEAD SHEET<br />
METAL SCREW. (LENGTH AND THREAD<br />
TYPE TO BE DETERMINED BY PROFILE.)<br />
AVAILABLE<br />
<strong>LOCK</strong>S<br />
A30700400<br />
A30700401<br />
A30700402<br />
A30700403<br />
A<br />
.882 [22.4mm]<br />
.632 [16.1mm]<br />
.852 [22.6mm]<br />
.602 [15.2mm]<br />
RECOMMENDED SCREWS:<br />
(QTY 2) #6 SCREW WITH A #5 HEAD,<br />
PHILLIPS FLAT HEAD SHEET METAL SCREW.<br />
(LENGTH AND THREAD TYPE TO BE<br />
DETERMINED BY PROFILE.)<br />
B<br />
.060<br />
[1.5mm]<br />
.030<br />
[.7mm]<br />
1c<br />
700 west bridge street, owatonna, mn 55060 ■ 507.451.5620 800.866.7884 ■ TRUTH.COM
DOUBLE HUNG<br />
SLIDER 9200 <strong>SASH</strong> <strong>LOCK</strong> & KEEPERS 3<br />
The options available on <strong>Truth</strong><br />
<strong>Hardware</strong>’s 9200 Series Sash Locks<br />
are virtually endless.<br />
• There are bases with or without<br />
alignment lugs which are helpful in<br />
preventing side shift of the sash<br />
(See <strong>Truth</strong> Tip #1).<br />
• There are various mounting hole<br />
patterns from which to choose,<br />
which will ensure that your hardware<br />
is located in the most efficient<br />
location for optimum holding power<br />
(See <strong>Truth</strong> Tip #5).<br />
• A variety of locking cams are<br />
available that help to pull meeting<br />
rails tightly together and will<br />
produce a better seal of the sash at<br />
the head and sill to help decrease air<br />
infiltration. Another reason for<br />
optional cam sizes is to help avoid<br />
potential interference created when<br />
the cam extends out to far. Refer to<br />
the following drawings to find the<br />
one which best meets your<br />
requirements.<br />
• Based on window design, and the<br />
space allowed for mounting the<br />
window hardware – some window<br />
systems are better suited for<br />
narrower keepers, or even facemounted<br />
varieties. The 9200 Series<br />
has a number of Top Mount, and<br />
Face Mount keepers to choose from.<br />
LOGO OPTIONS: For that<br />
“personalized touch”, <strong>Truth</strong>’s 9200<br />
Series Check Rail Locks are capable of<br />
accepting your company’s name or<br />
logo. <strong>Truth</strong>’s logo reproduction<br />
process is an attractive way of<br />
highlighting your company signature.<br />
For further details on where your<br />
company’s logo would appear, please<br />
refer to the following drawings.<br />
WARRANTY:<br />
Protected under the terms of the<br />
“<strong>Truth</strong> Warranty for Window & Door<br />
Manufacturers & Authorized<br />
Distributors”. Refer to <strong>Truth</strong>’s Terms<br />
& Conditions for further details.<br />
MATERIAL: High-pressure,<br />
corrosion-resistant, die-cast zinc.<br />
FINISH: Electrostatically applied,<br />
durable coatings that provide excellent<br />
resistance to chipping, scratching and<br />
corrosion while maintaining color<br />
stability for years in direct sunlight.<br />
Please refer to <strong>Truth</strong>’s Color Chart for<br />
examples of <strong>Truth</strong>’s most popular<br />
finish options. <strong>Truth</strong> also offers a wide<br />
range of decorative “plated” finishes –<br />
contact <strong>Truth</strong> for additional<br />
information on availability of these<br />
finishes on specific product lines.<br />
ORDERING INFORMATION:<br />
1. Choose the 9200 Series Cam Lock<br />
style desired (specify by part number).<br />
2. Specify finish number.<br />
3. Specify Keeper to be ordered.<br />
RECOMMENDED SCREWS:<br />
Types of screws required determined<br />
by material of profile used (sold<br />
separately). For additional information<br />
on screw selection - see <strong>Truth</strong> Tips.<br />
TRUTH TIPS:<br />
1. A lock with pick-resistant<br />
alignment nibs should be used<br />
whenever possible. A lock without<br />
nibs should be chosen when the lugs<br />
cause interference with divided light<br />
grills or other window features.<br />
2. A lock with a small cam should be<br />
used when the larger sweep radius of<br />
the .125” (3.2 mm) pull-in cam causes<br />
interference with the glazing or other<br />
areas of the profile. A face-mounted<br />
keeper is usually required.<br />
3. When two locks are used on one<br />
window, the placement of each lock,<br />
with respect to its keeper, becomes<br />
very critical to maintain a constant<br />
weatherseal on all sides of the window<br />
and to insure that each lock engages<br />
properly with its keeper.<br />
4. For accurate hardware placement in<br />
vinyl or metal applications, pre-drilling<br />
of the window profile is recommended.<br />
5. For vinyl window applications,<br />
mounting screws should pass through<br />
two PVC walls, or one PVC wall and<br />
one insert wall. For this reason, it may<br />
be necessary to use a longer screw than<br />
is recommended.<br />
6. For metal window profiles, <strong>Truth</strong><br />
recommends stainless steel machine<br />
screws. However, in most<br />
applications, stainless steel sheet metal<br />
screws will provide adequate holding<br />
power.<br />
INCLUDE TRUTH SPECS ON<br />
YOUR NEXT WINDOW PROJECT<br />
Window check rail locks shall be<br />
included which will increase both<br />
security and weather seal tightness.<br />
The lock must provide easy operation<br />
and positive locked feel.<br />
Window check rail locks will be of<br />
internal cam design to provide<br />
optimum pull-in to aid in sealing the<br />
meeting rails. The lock and<br />
accompanying keeper will prevent<br />
misalignment during locking. The lock<br />
and keeper shall be constructed of high<br />
pressure zinc alloy die castings.<br />
Window locks shall be 9200 Series<br />
locks as manufactured by <strong>Truth</strong><br />
<strong>Hardware</strong>.
9200<br />
<strong>SASH</strong> <strong>LOCK</strong> & KEEPERS<br />
FIG. 1 <strong>SASH</strong> <strong>LOCK</strong> AND KEEPER<br />
2.836<br />
[72.0 mm]<br />
NIBS<br />
NESTING NIBS<br />
A<br />
1.000<br />
[25.4 mm]<br />
LOGO AREA<br />
NO NIBS SHOWN<br />
RIGHT HAND SHOWN<br />
B<br />
LOGO AREA<br />
.735<br />
[18.7 mm]<br />
AVAILABLE<br />
LOGO AREA<br />
LOGO AREA SHOWN<br />
FULL SCALE<br />
.470<br />
[11.9 mm]<br />
HANDING<br />
NIBS<br />
3a<br />
PART<br />
NUMBER<br />
A09200400<br />
A09200401<br />
A09200402<br />
A09200407<br />
A09200409<br />
A09200411<br />
A09200412<br />
A09200416<br />
A09200417<br />
A09200420<br />
A09200427<br />
A09200430<br />
A09200432<br />
A09200441<br />
A09200457<br />
A09200520<br />
A09200537<br />
A09200580<br />
A09200599<br />
"A" DIMENSION<br />
0.390 (9.9mm)<br />
0.390 (9.9mm)<br />
0.437 (11.1mm)<br />
0.687 (17.4mm)<br />
0.687 (17.4mm)<br />
0.719 (18.3mm)<br />
0.437 (11.1mm)<br />
0.437 (11.1mm)<br />
0.687 (17.4mm)<br />
0.687 (17.4mm)<br />
0.687 (17.4mm)<br />
0.390 (9.9mm)<br />
0.390 (9.9mm)<br />
0.437 (11.1mm)<br />
0.437 (11.1mm)<br />
0.687 (17.4mm)<br />
0.687 (17.4mm)<br />
0.687 (17.4mm)<br />
0.719 (18.3mm)<br />
"B"<br />
DIMENSION<br />
2.250 (57.2mm)<br />
2.250 (57.2mm)<br />
2.062 (52.4mm)<br />
2.062 (52.4mm)<br />
2.062 (52.4mm)<br />
2.156 (54.8mm)<br />
2.062 (52.4mm)<br />
2.062 (52.4mm)<br />
2.062 (52.4mm)<br />
2.062 (52.4mm)<br />
2.062 (52.4mm)<br />
2.250 (57.2mm)<br />
2.250 (57.2mm)<br />
2.250 (57.2mm)<br />
2.250 (57.2mm)<br />
2.062 (52.4mm)<br />
2.062 (52.4mm)<br />
2.062 (52.4mm)<br />
2.156 (54.8mm)<br />
RH<br />
X<br />
X<br />
X<br />
X<br />
X<br />
X<br />
X<br />
X<br />
X<br />
X<br />
X<br />
X<br />
X<br />
X<br />
X<br />
X<br />
X<br />
LH<br />
X<br />
X<br />
NO<br />
NIBS<br />
X<br />
X<br />
X<br />
X<br />
X<br />
X<br />
X<br />
X<br />
X<br />
X<br />
X<br />
X<br />
X<br />
NIBS<br />
NESTING<br />
NIBS<br />
X<br />
X<br />
X<br />
X<br />
X<br />
X<br />
# 8 SCREW<br />
# 8 SCREW<br />
# 6 SCREW<br />
# 6 SCREW<br />
# 6 SCREW<br />
# 8 SCREW<br />
# 6 SCREW<br />
# 6 SCREW<br />
# 6 SCREW<br />
# 6 SCREW<br />
# 6 SCREW<br />
# 8 SCREW<br />
# 8 SCREW<br />
# 8 SCREW<br />
# 8 SCREW<br />
# 6 SCREW<br />
# 6 SCREW<br />
.187 DIA. RIVET<br />
# 6 SCREW<br />
* ALL SCREWS ARE TO BE PHILLIPS FLAT HEAD. (LENGTH AND TYPE TO BE DETERMINED BY PROFILE)<br />
RECOMMENDED<br />
SCREWS *<br />
CAM<br />
REACH<br />
0.06 (1.5mm)<br />
0.06 (1.5mm)<br />
0.06 (1.5mm)<br />
0.06 (1.5mm)<br />
0.06 (1.5mm)<br />
0.06 (1.5mm)<br />
0.06 (1.5mm)<br />
NO PULL-IN<br />
NO PULL-IN<br />
0.06 (1.5mm)<br />
0.06 (1.5mm)<br />
0.06 (1.5mm)<br />
0.06 (1.5mm)<br />
0.06 (1.5mm)<br />
0.06 (1.5mm)<br />
0.06 (1.5mm)<br />
0.06 (1.5mm)<br />
0.06 (1.5mm)<br />
0.06 (1.5mm)
9200 <strong>SASH</strong> <strong>LOCK</strong> & KEEPERS 3b<br />
FIG. 2 <strong>LOCK</strong>/KEEPER COMPATIBILITY TABLES<br />
"B"<br />
DIMENSION (HOLE CENTER TO HOLE CENTER-<strong>LOCK</strong> TO KEEPER)<br />
<strong>LOCK</strong>S<br />
A09200407<br />
A09200402<br />
A09200401<br />
A09200400<br />
A09200416<br />
A09200412<br />
A09200411<br />
A09200409<br />
A09200432<br />
A09200430<br />
A09200427<br />
A09200420<br />
A09200417<br />
A09200520<br />
A09200457<br />
A09200441<br />
A09200599<br />
A09200580<br />
A09200537<br />
SURFACE MOUNT KEEPERS<br />
C08924<br />
C09022<br />
C09145<br />
C09256<br />
C09335<br />
C09336<br />
C09452<br />
C09717<br />
C09968<br />
C30022<br />
.60 --<br />
-- .60<br />
-- .57<br />
-- .58<br />
-- --<br />
.59 --<br />
-- --<br />
-- --<br />
--<br />
--<br />
--<br />
.64<br />
.64<br />
.64<br />
.90<br />
.87<br />
.87<br />
--<br />
--<br />
--<br />
.57 -- -- --<br />
-- .79 -- 1.08<br />
.60 -- -- --<br />
.60<br />
--<br />
--<br />
--<br />
.93<br />
--<br />
--<br />
--<br />
.65<br />
--<br />
--<br />
--<br />
.65<br />
--<br />
--<br />
--<br />
-- -- -- --<br />
.89 .92 .64 .64<br />
-- -- -- -- --<br />
.87 .90 .62 .62 .87<br />
.90 --<br />
-- --<br />
-- --<br />
-- --<br />
-- .89<br />
.89 .89<br />
.90<br />
--<br />
--<br />
.89<br />
.60<br />
--<br />
--<br />
.59<br />
--<br />
--<br />
--<br />
.59<br />
.59<br />
.89 -- -- .59<br />
.65<br />
--<br />
--<br />
.64<br />
-- .87 .57 -- .62<br />
-- -- -- -- -- -- -- -- -- --<br />
.89 .93 .65 .65 .90 -- .90 .60 -- .65<br />
--<br />
--<br />
--<br />
--<br />
--<br />
--<br />
--<br />
--<br />
.65<br />
--<br />
--<br />
--<br />
--<br />
.64<br />
.62<br />
.65<br />
.90<br />
--<br />
--<br />
--<br />
--<br />
.89<br />
-- --<br />
.87<br />
.90<br />
--<br />
--<br />
--<br />
--<br />
.89<br />
.89<br />
.89<br />
--<br />
-- -- --<br />
--<br />
.90<br />
--<br />
--<br />
--<br />
--<br />
.89<br />
.87<br />
.90<br />
.93<br />
--<br />
--<br />
--<br />
--<br />
.92<br />
-- --<br />
.90<br />
-- --<br />
.93<br />
KEEPER<br />
CENTER OF SCREW<br />
C<br />
B<br />
D<br />
<strong>SASH</strong><br />
<strong>LOCK</strong><br />
SURFACE MOUNT KEEPER<br />
LOCATION<br />
FACE MOUNT KEEPER<br />
LOCATION<br />
<strong>LOCK</strong>S<br />
A09200400<br />
DIMENSION<br />
A09200409<br />
A09200412<br />
A09200416<br />
A09200417<br />
A09200427<br />
A09200430<br />
A09200441<br />
A09200457<br />
A09200520<br />
A09200580<br />
A09200411<br />
A09200599<br />
FACE MOUNT KEEPERS<br />
C09062<br />
C09312<br />
C09391<br />
C09659<br />
C09697<br />
C09906<br />
C<br />
D<br />
C<br />
D<br />
C<br />
D<br />
C<br />
D<br />
C<br />
D<br />
C<br />
D<br />
0.63<br />
1.08<br />
0.40<br />
0.50<br />
--<br />
--<br />
0.65<br />
0.32<br />
0.65<br />
0.85<br />
--<br />
--<br />
0.93 0.96<br />
1.08 1.08<br />
0.70 0.73<br />
0.50 0.50<br />
-- --<br />
-- --<br />
0.95 0.98<br />
0.32 0.32<br />
0.95 0.98<br />
0.85 0.85<br />
-- --<br />
-- --<br />
0.68<br />
1.08<br />
0.50<br />
0.50<br />
--<br />
--<br />
0.70<br />
0.32<br />
0.70<br />
0.85<br />
--<br />
--<br />
0.66<br />
1.08<br />
0.48<br />
0.50<br />
--<br />
--<br />
0.68<br />
0.32<br />
0.68<br />
0.85<br />
--<br />
--<br />
0.91<br />
1.08<br />
0.68<br />
0.50<br />
--<br />
--<br />
0.93<br />
0.32<br />
0.93<br />
0.85<br />
--<br />
--<br />
0.93<br />
1.06<br />
0.70<br />
0.48<br />
--<br />
--<br />
0.95<br />
0.30<br />
0.95<br />
0.83<br />
--<br />
--<br />
0.63<br />
1.08<br />
0.40<br />
0.50<br />
--<br />
--<br />
0.65<br />
0.32<br />
0.65<br />
0.85<br />
--<br />
--<br />
0.68<br />
1.08<br />
0.45<br />
0.50<br />
--<br />
--<br />
0.70<br />
0.32<br />
0.70<br />
0.85<br />
--<br />
--<br />
0.68<br />
1.08<br />
0.45<br />
0.50<br />
--<br />
--<br />
0.70<br />
0.32<br />
0.70<br />
0.85<br />
--<br />
--<br />
0.93<br />
1.08<br />
0.70<br />
0.50<br />
--<br />
--<br />
0.95<br />
0.32<br />
0.95<br />
0.85<br />
--<br />
--<br />
0.93<br />
1.08<br />
0.70<br />
0.50<br />
--<br />
--<br />
0.95<br />
0.32<br />
0.95<br />
0.85<br />
--<br />
--<br />
0.96<br />
1.12<br />
0.73<br />
0.52<br />
1.08<br />
0.22<br />
0.98<br />
0.35<br />
0.98<br />
0.89<br />
1.08<br />
0.22
9200<br />
<strong>SASH</strong> <strong>LOCK</strong> & KEEPERS<br />
FIG. 3 C08924XX KEEEPER<br />
.160<br />
[4.1 mm]<br />
RECOMMENED SCREWS:<br />
2.124<br />
[53.9 mm]<br />
2.840<br />
[72.1 mm]<br />
(QTY 2) #6 PHILLIPS FLAT HEAD SCREWS<br />
(LENGTH AND THREAD TYPE TO BE DETERMINED<br />
BY PROFILE)<br />
.320<br />
[8.1 mm]<br />
.460<br />
[11.7 mm]<br />
AVAILABLE <strong>LOCK</strong>S<br />
<strong>LOCK</strong><br />
PART<br />
NUMBER<br />
A09200400<br />
A09200409<br />
A09200411<br />
A09200412<br />
A09200416<br />
A09200417<br />
A09200427<br />
A09200430<br />
A09200441<br />
A09200457<br />
A09200520<br />
A09200580<br />
A09200599<br />
"B"<br />
SEE FIG. 2<br />
0.60 (15.2mm)<br />
0.60 (15.2mm)<br />
0.93 (23.5mm)<br />
0.65 (16.5mm)<br />
0.65 (16.5mm)<br />
0.90 (22.9mm)<br />
0.90 (22.9mm)<br />
0.60 (15.2mm)<br />
0.65 (16.5mm)<br />
0.65 (16.5mm)<br />
0.90 (22.9mm)<br />
0.90 (22.9mm)<br />
0.93 (23.5mm)<br />
FIG. 4 C09335XX KEEPER<br />
2.250<br />
[57.2 mm]<br />
.136<br />
[3.5 mm]<br />
.280<br />
[7.1 mm]<br />
2.840<br />
[72.1 mm]<br />
.480<br />
[12.2 mm]<br />
AVAILABLE <strong>LOCK</strong>S<br />
RECOMMENDED SCREWS:<br />
(QTY 2) #6 SCREW WITH A #5 HEAD<br />
(LENGTH AND THREAD TYPE TO BE DETERMINED<br />
BY PROFILE.)<br />
<strong>LOCK</strong><br />
PART<br />
NUMBER<br />
A09200402<br />
A09200420<br />
A09200432<br />
A09200537<br />
"B"<br />
SEE FIG. 2<br />
0.64 (16.3mm)<br />
0.89 (22.6mm)<br />
0.59 (15.0mm)<br />
0.89 (22.6mm)<br />
3c
9200 <strong>SASH</strong> <strong>LOCK</strong> & KEEPERS 3d<br />
FIG. 5 C09452XX KEEEPER<br />
2.060<br />
[52.3 mm]<br />
.280<br />
[7.1 mm]<br />
2X .120<br />
[3.0 mm]<br />
.140<br />
[3.6 mm]<br />
2.840<br />
[72.1 mm]<br />
.480<br />
[12.2 mm]<br />
AVAILABLE <strong>LOCK</strong>S<br />
RECOMMENDED SCREWS:<br />
(QTY 2) #6 SCREW WITH A #5 HEAD<br />
(LENGTH AND THREAD TYPE TO BE<br />
DETERMINED BY PROFILE.)<br />
<strong>LOCK</strong><br />
PART<br />
NUMBER<br />
A09200402<br />
A09200420<br />
A09200432<br />
A09200537<br />
"B"<br />
SEE FIG. 2<br />
0.64 (16.3mm)<br />
0.89 (22.6mm)<br />
0.59 (15.0mm)<br />
0.89 (22.6mm)<br />
FIG. 6 C09717XX KEEPER<br />
.250<br />
[6.4 mm]<br />
.528<br />
[13.4 mm]<br />
2.250<br />
[57.2 mm]<br />
2.840<br />
[72.1 mm]<br />
RECOMMENDED SCREWS:<br />
.120<br />
[3.0 mm]<br />
2X .150<br />
[3.8 mm]<br />
(QTY 2) #6 PHILLIPS FLAT HEAD<br />
SCREWS. (LENGTH AND THREAD TYPE<br />
TO BE DETERMINED BY PROFILE.)<br />
.303<br />
[7.7 mm]<br />
<strong>LOCK</strong><br />
PART<br />
NUMBER<br />
A09200400<br />
A09200409<br />
A09200411<br />
A09200412<br />
A09200416<br />
A09200417<br />
A09200427<br />
A09200430<br />
A09200441<br />
A09200457<br />
A09200520<br />
A09200580<br />
A09200599<br />
AVAILABLE <strong>LOCK</strong>S<br />
"B"<br />
SEE FIG. 2<br />
0.57 (14.5mm)<br />
0.87 (22.1mm)<br />
0.90 (22.9mm)<br />
0.62 (15.7mm)<br />
0.62 (15.7mm)<br />
0.87 (22.1mm)<br />
0.87 (22.1mm)<br />
0.57 (14.5mm)<br />
0.62 (15.7mm)<br />
0.62 (15.7mm)<br />
0.87 (22.1mm)<br />
0.87 (22.1mm)<br />
0.90 (22.9mm)
9200<br />
<strong>SASH</strong> <strong>LOCK</strong> & KEEPERS<br />
FIG. 7 C09336XX KEEPER<br />
2.202<br />
[55.9 mm]<br />
.140<br />
.280 [3.6 mm]<br />
[7.1 mm]<br />
2.840<br />
[72.1 mm]<br />
RECOMMENDED SCREWS:<br />
(QTY 2) #6 PHILLIPS FLAT HEAD<br />
SCREWS. (LENGTH AND THREAD TYPE<br />
TO BE DETERMINED BY PROFILE.)<br />
2X .266<br />
[6.8 mm]<br />
.480<br />
[12.2 mm]<br />
<strong>LOCK</strong><br />
PART<br />
NUMBER<br />
A09200400<br />
A09200402<br />
A09200409<br />
A09200411<br />
A09200412<br />
A09200416<br />
A09200417<br />
A09200420<br />
A09200427<br />
A09200430<br />
A09200432<br />
A09200441<br />
A09200457<br />
A09200520<br />
A09200537<br />
A09200580<br />
A09200599<br />
AVAILABLE <strong>LOCK</strong>S<br />
"B"<br />
SEE FIG. 2<br />
0.59 (15.0mm)<br />
0.64 (16.3mm)<br />
0.89 (22.6mm)<br />
0.92 (23.4mm)<br />
0.64 (16.3mm)<br />
0.64 (16.3mm)<br />
0.89 (22.6mm)<br />
0.89 (22.6mm)<br />
0.89 (22.6mm)<br />
0.59 (15.0mm)<br />
0.59 (15.0mm)<br />
0.64 (16.3mm)<br />
0.64 (16.3mm)<br />
0.89 (22.6mm)<br />
0.89 (22.6mm)<br />
0.89 (22.6mm)<br />
0.92 (23.4mm)<br />
FIG. 8 C030022XX KEEPER<br />
.300<br />
[7.6 mm]<br />
.505<br />
[12.8 mm]<br />
2.186<br />
[55.5 mm]<br />
2.840<br />
[72.1 mm]<br />
RECOMMENDED SCREWS:<br />
(QTY 2) #6 PHILLIPS FLAT HEAD<br />
SCREWS. (LENGTH AND THREAD TYPE<br />
TO BE DETERMINED BY PROFILE.)<br />
.150<br />
[3.8 mm]<br />
2X .251<br />
[6.4 mm]<br />
.300<br />
[7.6 mm]<br />
<strong>LOCK</strong><br />
PART<br />
NUMBER<br />
A09200400<br />
A09200409<br />
A09200411<br />
A09200412<br />
A09200416<br />
A09200417<br />
A09200427<br />
A09200430<br />
A09200441<br />
A09200457<br />
A09200520<br />
A09200580<br />
A09200599<br />
AVAILABLE <strong>LOCK</strong>S<br />
"B"<br />
SEE FIG. 2<br />
0.60 (15.2mm)<br />
0.89 (22.6mm)<br />
0.93 (23.5mm)<br />
0.65 (16.5mm)<br />
0.65 (16.5mm)<br />
0.90 (22.9mm)<br />
0.90 (22.9mm)<br />
0.60 (15.2mm)<br />
0.65 (16.5mm)<br />
0.65 (16.5mm)<br />
0.90 (22.9mm)<br />
0.90 (22.9mm)<br />
0.93 (23.5mm)<br />
3e
9200 <strong>SASH</strong> <strong>LOCK</strong> & KEEPERS 3f<br />
FIG. 9 C09022XX KEEPER<br />
2.250<br />
[57.2 mm]<br />
.160<br />
[4.1 mm]<br />
.320<br />
[8.1 mm]<br />
2X .090<br />
[2.3 mm]<br />
.473<br />
[12.0 mm]<br />
RECOMMENDED SCREWS:<br />
(QTY 2) #8 PHILLIPS FLAT HEAD<br />
SCREWS. (LENGTH AND THREAD TYPE<br />
TO BE DETERMINED BY PROFILE.)<br />
2.840<br />
[72.1 mm]<br />
<strong>LOCK</strong><br />
PART<br />
NUMBER<br />
A09200401<br />
A09200407<br />
AVAILABLE <strong>LOCK</strong>S<br />
"B"<br />
SEE FIG. 2<br />
0.60 (15.2mm)<br />
0.90 (22.9mm)<br />
FIG. 10 C09968XX KEEPER<br />
2.062<br />
[52.4 mm]<br />
.344<br />
[8.7 mm]<br />
.516<br />
[13.1 mm]<br />
.278<br />
[7.1 mm]<br />
.500<br />
[12.7 mm]<br />
RECOMMENDED SCREWS:<br />
(QTY 2) #6 PHILLIPS FLAT HEAD<br />
SCREWS. (LENGTH AND THREAD TYPE<br />
TO BE DETERMINED BY PROFILE.)<br />
2.840<br />
[72.1 mm]<br />
<strong>LOCK</strong><br />
PART<br />
NUMBER<br />
A09200401<br />
A09200407<br />
AVAILABLE <strong>LOCK</strong>S<br />
"B"<br />
SEE FIG. 2<br />
0.79 (20.1mm)<br />
1.08 (27.4mm)
9200<br />
<strong>SASH</strong> <strong>LOCK</strong> & KEEPERS<br />
FIG. 11 C09145XX KEEPER<br />
2.156<br />
[54.8 mm]<br />
.123<br />
[3.1 mm]<br />
.250<br />
[6.4 mm]<br />
.275<br />
[7.0 mm]<br />
.460<br />
[11.7 mm]<br />
2.840<br />
[72.1 mm]<br />
RECOMMENDED SCREWS:<br />
(QTY 2) #8 PHILLIPS FLAT HEAD<br />
SCREWS. (LENGTH AND THREAD TYPE<br />
TO BE DETERMINED BY PROFILE.)<br />
AVAILABLE <strong>LOCK</strong>S<br />
<strong>LOCK</strong><br />
PART<br />
NUMBER<br />
A09200401<br />
A09200407<br />
"B"<br />
SEE FIG. 2<br />
0.57 (14.5mm)<br />
0.87 (22.1mm)<br />
FIG. 12 C09256XX KEEPER<br />
2.250<br />
[57.2 mm]<br />
.123<br />
[3.1 mm]<br />
.250<br />
[6.4 mm]<br />
.505<br />
[12.8 mm]<br />
RECOMMENDED SCREWS:<br />
2.840<br />
[72.1 mm]<br />
AVAILABLE <strong>LOCK</strong>S<br />
<strong>LOCK</strong><br />
PART<br />
NUMBER<br />
"B"<br />
SEE FIG. 2<br />
(QTY 2) #6 PHILLIPS FLAT HEAD<br />
SCREWS. (LENGTH AND THREAD TYPE<br />
TO BE DETERMINED BY PROFILE.)<br />
A09200401<br />
A09200407<br />
0.57 (14.5mm)<br />
0.87 (22.1mm)<br />
3g
9200 <strong>SASH</strong> <strong>LOCK</strong> & KEEPERS 3h<br />
FIG. 13 C09659XX FACE MOUNT KEEPER<br />
1.500<br />
[38.1 mm]<br />
AVAILABLE <strong>LOCK</strong>S<br />
<strong>LOCK</strong><br />
PART<br />
NUMBER<br />
A09200400<br />
.190<br />
[4.8 mm]<br />
A09200409<br />
A09200411<br />
.289<br />
[7.3 mm]<br />
A09200412<br />
A09200416<br />
A09200417<br />
.397<br />
[10.1 mm]<br />
1.000<br />
[25.4 mm]<br />
.270<br />
[6.9 mm]<br />
.093<br />
[2.4 mm]<br />
.160<br />
[4.1 mm]<br />
A09200427<br />
A09200430<br />
A09200441<br />
A09200457<br />
RECOMMENDED SCREWS:<br />
A09200520<br />
(QTY 2) #6 PHILLIPS FLAT HEAD<br />
SCREWS. (LENGTH AND THREAD TYPE<br />
TO BE DETERMINED BY PROFILE.)<br />
A09200580<br />
A09200599<br />
FIG. 14 C09312XX FACE MOUNT KEEPER<br />
1.750<br />
[44.4 mm]<br />
AVAILABLE <strong>LOCK</strong>S<br />
<strong>LOCK</strong><br />
PART<br />
NUMBER<br />
A09200400<br />
A09200409<br />
.406<br />
[10.3 mm]<br />
.150<br />
[3.8 mm]<br />
A09200411<br />
A09200412<br />
A09200416<br />
1.326<br />
[33.7 mm]<br />
A09200417<br />
A09200427<br />
.875<br />
[22.2 mm]<br />
.467<br />
[11.9 mm]<br />
.070<br />
[1.8 mm]<br />
A09200430<br />
A09200441<br />
A09200457<br />
RECOMMENDED SCREWS:<br />
A09200520<br />
(QTY 2) #6 PHILLIPS FLAT HEAD<br />
SCREWS. (LENGTH AND THREAD TYPE<br />
TO BE DETERMINED BY PROFILE.)<br />
A09200580<br />
A09200599
9200<br />
<strong>SASH</strong> <strong>LOCK</strong> & KEEPERS<br />
FIG. 15 C09697XX FACE MOUNT KEEPER<br />
1.500<br />
[38.1 mm]<br />
AVAILABLE <strong>LOCK</strong>S<br />
<strong>LOCK</strong><br />
PART<br />
NUMBER<br />
.397<br />
[10.1 mm]<br />
.190<br />
[4.8 mm]<br />
A09200400<br />
A09200409<br />
A09200411<br />
A09200412<br />
.944<br />
[24.0 mm]<br />
.828<br />
[21.0 mm]<br />
1.575<br />
[40.0 mm]<br />
A09200416<br />
A09200417<br />
.217<br />
[5.5 mm]<br />
.434<br />
[11.0 mm]<br />
.093<br />
[2.4 mm]<br />
A09200427<br />
A09200430<br />
A09200441<br />
A09200457<br />
RECOMMENDED SCREWS:<br />
A09200520<br />
(QTY 2) #6 PHILLIPS FLAT HEAD<br />
SCREWS. (LENGTH AND THREAD TYPE<br />
TO BE DETERMINED BY PROFILE.)<br />
A09200580<br />
A09200599<br />
FIG. 16 C09062XX FACE MOUNT KEEPER<br />
AVAILABLE <strong>LOCK</strong>S<br />
.250<br />
[6.4 mm]<br />
1.500<br />
[38.1 mm]<br />
<strong>LOCK</strong><br />
PART<br />
NUMBER<br />
A09200400<br />
.250<br />
[6.4 mm]<br />
.250<br />
[6.4 mm]<br />
A09200409<br />
A09200411<br />
A09200412<br />
.452<br />
[11.5 mm]<br />
1.562<br />
[39.7 mm]<br />
1.750<br />
[44.4 mm]<br />
A09200416<br />
A09200417<br />
A09200427<br />
A09200430<br />
1.000<br />
[25.4 mm]<br />
RECOMMENDED SCREWS:<br />
.070<br />
[1.8 mm]<br />
.090<br />
[2.3 mm]<br />
A09200441<br />
A09200457<br />
A09200520<br />
(QTY 2) #6 PHILLIPS PAN HEAD<br />
SCREWS. (LENGTH AND THREAD TYPE<br />
TO BE DETERMINED BY PROFILE.)<br />
A09200580<br />
A09200599<br />
3i
9200 <strong>SASH</strong> <strong>LOCK</strong> & KEEPERS 3j<br />
FIG. 17 C09391XX FACE MOUNT KEEPER<br />
AVAILABLE <strong>LOCK</strong>S<br />
2.800<br />
[71.1 mm]<br />
<strong>LOCK</strong><br />
PART<br />
NUMBER<br />
A09200400<br />
A09200409<br />
.320<br />
[8.1 mm]<br />
2.062<br />
[52.4 mm]<br />
.370<br />
[9.4 mm]<br />
A09200411<br />
A09200412<br />
A09200416<br />
A09200417<br />
.185<br />
[4.7 mm]<br />
RECOMMENDED SCREWS:<br />
(QTY 2) #6 PHILLIPS FLAT HEAD<br />
SCREWS. (LENGTH AND THREAD TYPE<br />
TO BE DETERMINED BY PROFILE.)<br />
2X .265<br />
[6.7 mm]<br />
A09200427<br />
A09200430<br />
A09200441<br />
A09200457<br />
A09200520<br />
A09200580<br />
A09200599<br />
FIG. 18 C09906XX FACE MOUNT KEEPER<br />
.322<br />
[8.2 mm]<br />
2.750<br />
[69.8 mm]<br />
AVAILABLE <strong>LOCK</strong>S<br />
<strong>LOCK</strong><br />
PART<br />
NUMBER<br />
A09200400<br />
A09200409<br />
A09200411<br />
2.052<br />
[52.1 mm]<br />
5.0°<br />
A09200412<br />
A09200416<br />
A09200417<br />
.185<br />
[4.7 mm]<br />
RECOMMENDED SCREWS:<br />
2X .221<br />
[5.6 mm]<br />
(QTY 2) #6 PHILLIPS FLAT HEAD<br />
SCREWS. (LENGTH AND THREAD TYPE<br />
TO BE DETERMINED BY PROFILE.)<br />
.370<br />
[9.4 mm]<br />
A09200427<br />
A09200430<br />
A09200441<br />
A09200457<br />
A09200520<br />
A09200580<br />
A09200599
9200<br />
<strong>SASH</strong> <strong>LOCK</strong> & KEEPERS<br />
FIG. 19 41434 FACE MOUNT KEEPER<br />
.117<br />
[3.0 mm]<br />
1.994<br />
[50.6 mm]<br />
.275<br />
[7.0 mm]<br />
1.041<br />
[26.4 mm]<br />
.151<br />
[3.8 mm]<br />
1.000<br />
[25.4 mm]<br />
1.500<br />
[38.1 mm]<br />
.244<br />
[6.2 mm]<br />
.250<br />
[6.4 mm]<br />
.195<br />
[5.0 mm]<br />
FIG. 20 41405 KEEPER<br />
2.050<br />
[52.1 mm]<br />
.125<br />
[3.2 mm]<br />
AVAILABLE<br />
<strong>LOCK</strong>S<br />
A<br />
A09200666 .872 (22.1mm) .060 (1.5mm)<br />
B<br />
.269<br />
[6.8 mm]<br />
.442<br />
[11.2 mm]<br />
2.587<br />
[65.7 mm]<br />
.250<br />
[6.4 mm]<br />
RECOMMENDED SCREWS:<br />
(QTY2) #6 SHEET METAL SCREWS PHILLIPS FLAT HEAD SCREWS<br />
(LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE)<br />
3k 700 WEST BRIDGE STREET, OWATONNA, MN 55060 n 507.451.5620 800.866.7884 n TRUTH.COM
DOUBLE HUNG<br />
SLIDER<br />
17 TRIMLINE<br />
CAM <strong>LOCK</strong><br />
By pulling meeting rails tightly<br />
together and by producing a better seal<br />
of the sash at the head and sill, the<br />
TrimLine TM Cam Lock decreases air<br />
infiltration. And with its new slimmer<br />
handle design, its low profile design<br />
helps assure maximum egress opening.<br />
An innovative spring design holds the<br />
handle in both the locked and unlocked<br />
positions while a concealed locking<br />
mechanism protects moving parts from<br />
dust and dirt for added lock life, too.<br />
For locks designed with alignment<br />
lugs, a positive sash alignment feature<br />
prevents side shift of the sash. An<br />
improved detent in both the locking<br />
and unlocking motion of the handle,<br />
assures that the cam has completed its<br />
travel. Designed for #6 mounting<br />
screws on 2.062” (52.4mm) center-tocenter<br />
hole spacing on both the lock<br />
and keepers. This lock produces a<br />
.125” (3.2mm) pull-in {.062” (1.6mm)<br />
with small cam} with a .156” (4.0mm)<br />
lifting ability.<br />
SECURITY & RELIABILITY:<br />
The pick-resistant design of this lock<br />
helps you exceed the load requirements<br />
for AAMA 1302.5 Forced Entry<br />
Resistance Test, the California Model<br />
Building Security Ordinance and<br />
ASTM-588 Forced Entry Test.<br />
LOGO OPTIONS: For that<br />
“personalized touch”, <strong>Truth</strong>’s TrimLine<br />
Check Rail Locks are capable of<br />
accepting your company’s name or<br />
logo. <strong>Truth</strong>’s unique custom print logo<br />
reproduction process is an attractive<br />
way of highlighting your company<br />
signature. For further details on where<br />
your company’s logo would appear,<br />
please refer to the following drawings.<br />
WARRANTY:<br />
Protected under the terms of the <strong>Truth</strong><br />
Warranty for Window & Door<br />
Manufacturers and Authorized<br />
Distributors. Refer to <strong>Truth</strong>’s Terms &<br />
Conditions for further details.<br />
MATERIAL: High-pressure,<br />
corrosion-resistant, die-cast zinc.<br />
FINISH: Electrostatically applied,<br />
durable coatings that provide excellent<br />
resistance to chipping, scratching and<br />
corrosion while maintaining color<br />
stability for years in direct sunlight.<br />
Please refer to <strong>Truth</strong>’s Color Chart for<br />
examples of <strong>Truth</strong>’s most popular<br />
finish options. <strong>Truth</strong> also offers a wide<br />
range of decorative “plated” finishes -<br />
contact <strong>Truth</strong> for additional<br />
information on availability of these<br />
finishes on specific product lines.<br />
ORDERING INFORMATION:<br />
1. Choose the TrimLine Cam Lock<br />
style desired (specify by part number).<br />
2. Specify finish number.<br />
3. Select mounting hardware (sold<br />
separately): For Keeper styles, refer to<br />
TrimLine(tm) Keeper catalog page for<br />
styles and part numbers.<br />
RECOMMENDED SCREWS:<br />
Types of screws required determined<br />
by material of profile used. Refer to<br />
drawings for complete information on<br />
screw type and quantity needed (sold<br />
separately). For additional information<br />
on screw selection - see <strong>Truth</strong> Tips.<br />
TRUTH TIPS:<br />
1. A lock with pick-resistant alignment<br />
lugs should be used whenever possible.<br />
A lock without lugs should be chosen<br />
when the lugs cause interference with<br />
divided light grills or other window<br />
features.<br />
2. A lock with a small cam should be<br />
used when the larger sweep radius of<br />
the .125” (3.2mm) pull-in cam causes<br />
interference with the glazing or other<br />
areas of the profile. A face-mounted<br />
keeper is usually required.<br />
3. When two locks are used on one<br />
window, the placement of each lock,<br />
with respect to its keeper, becomes<br />
very critical to maintain a constant<br />
weatherseal on all sides of the window<br />
and to insure that each lock engages<br />
properly with its keeper.<br />
4. For accurate hardware placement in<br />
vinyl or metal applications, pre-drilling<br />
of the window profile is recommended.<br />
5. For vinyl window applications,<br />
mounting screws should pass through<br />
two PVC walls, or one PVC wall and<br />
one insert wall. For this reason, it may<br />
be necessary to use a longer screw than<br />
is recommended.<br />
6. For metal window profiles, <strong>Truth</strong><br />
recommends stainless steel machine<br />
screws. However, in most<br />
applications, stainless steel sheet metal<br />
screws will provide adequate holding<br />
power.<br />
INCLUDE TRUTH SPECS ON<br />
YOUR NEXT WINDOW PROJECT<br />
Window check rail locks shall be<br />
included which will increase both<br />
security and weather seal tightness.<br />
The lock must provide easy operation<br />
and positive locked feel (detent).<br />
Window check rail locks will be of<br />
internal cam design to provide .125”<br />
(3.2mm) of pull-in to aid in sealing<br />
the meeting rails. The lock and<br />
accompanying keeper will prevent<br />
mis-alignment during locking. The<br />
lock and keeper shall be constructed of<br />
high pressure zinc alloy die castings.<br />
Window locks shall be 17 series<br />
TrimLine, as manufactured by <strong>Truth</strong><br />
<strong>Hardware</strong>, Owatonna, MN.<br />
4
17 TRIMLINE<br />
CAM <strong>LOCK</strong><br />
FIG. 1 APPLICATION OF TRIMLINE CHECK RAIL <strong>LOCK</strong><br />
2.062<br />
[52.4 mm]<br />
A<br />
1.032<br />
[26.2 mm]<br />
2.594<br />
[65.9 mm]<br />
TOP MOUNTED KEEPER<br />
1.616<br />
[41.0 mm]<br />
GLASS<br />
.777<br />
[19.7 mm]<br />
D<br />
.442<br />
[11.2 mm]<br />
CHECKRAIL<br />
FACE MOUNTED KEEPER<br />
RECOMMENDED SCREWS:<br />
TOP AREA<br />
FRONT AREA<br />
"CUSTOM PRINT"<br />
LOGO AREAS AVAILABLE<br />
(FULL SCALE)<br />
WOOD: (QTY 2) (P/N 19050) #6 X .750 PHILLIPS,<br />
FLAT HEAD, SHEET METAL SCREWS.<br />
PVC/METAL: (QTY 2) #6 PHILLIPS, FLAT HEAD SCREWS<br />
(LENGTH AND THREAD TYPE TO BE DETERMINED<br />
BY PROFILE)<br />
FIG. 2 TRIMLINE CHECK RAIL <strong>LOCK</strong> OPTIONS<br />
ALIGNMENT LUGS<br />
CAM<br />
PRODUCT<br />
NUMBER<br />
17.32<br />
B<br />
.438 (11.1mm)<br />
WITH<br />
LUGS<br />
X<br />
WITHOUT<br />
LUGS<br />
LARGE<br />
CAM<br />
X<br />
SMALL<br />
CAM<br />
SPECIAL<br />
FEATURES<br />
17.33<br />
.688 (17.5mm)<br />
X<br />
X<br />
B<br />
17.34<br />
17.35<br />
.438 (11.1mm)<br />
.688 (17.5mm)<br />
X<br />
X<br />
X<br />
X<br />
2.062<br />
[52.4 mm]<br />
NOTE:<br />
LARGE CAM HAS .125 PULL-IN.<br />
SMALL CAM HAS .062 PULL-IN.<br />
17.38<br />
17.39<br />
17.40<br />
17.41<br />
17.43<br />
.438 (11.1mm)<br />
.688 (17.5mm)<br />
.438 (11.1mm)<br />
.688 (17.5mm)<br />
.438 (11.1mm)<br />
X<br />
X<br />
X<br />
X<br />
X<br />
X<br />
X<br />
X<br />
X<br />
X<br />
OPPOSITE HAND<br />
4a<br />
700 west bridge street, owatonna, mn 55060 ■ 507.451.5620 800.866.7884 ■ TRUTH.COM
DOUBLE HUNG<br />
SLIDER<br />
17 TRIMLINE<br />
CAM <strong>LOCK</strong> KEEPERS<br />
<strong>Truth</strong> realizes that each profile in the<br />
marketplace today may require its own<br />
particular Keeper due to the variety of<br />
mounting application possibilities.<br />
Because of this, <strong>Truth</strong> has developed<br />
a wide variety of Keepers for our<br />
TrimLine TM Cam Lock whose shapes<br />
and styles were designed to help satisfy<br />
these needs.<br />
The TrimLine TM Cam Lock Keepers in<br />
the accompanying drawings should<br />
provide you with all of the technical<br />
information you should require.<br />
However, if you wish further technical<br />
assistance in selecting a Keeper, please<br />
contact <strong>Truth</strong>.<br />
WARRANTY:<br />
Protected under the terms of the<br />
<strong>Truth</strong> Warranty for Window & Door<br />
Manufacturers & Authorized<br />
Distributors. Refer to <strong>Truth</strong>’s Terms<br />
& Conditions for further details.<br />
TRUTH TIPS<br />
1. For accurate hardware placement in<br />
vinyl or metal applications, pre-drilling<br />
of the window profile is recommended.<br />
2. For vinyl window applications,<br />
mounting screws should pass through<br />
two PVC walls, or one PVC wall and<br />
one insert wall. For this reason, it may<br />
be necessary to use a longer screw than<br />
is recommended.<br />
3. For metal window profiles, <strong>Truth</strong><br />
recommends stainless steel machine<br />
screws. However, in most<br />
applications, stainless steel sheet metal<br />
screws will provide adequate holding<br />
power.<br />
MATERIAL: High-pressure,<br />
corrosion-resistant die-cast zinc.<br />
FINISH: Electrostatically applied,<br />
durable coatings that provide excellent<br />
resistance to chipping, scratching and<br />
corrosion while maintaining color<br />
stability for years in direct sunlight.<br />
Please refer to <strong>Truth</strong>ís Color Chart for<br />
examples of <strong>Truth</strong>’s most popular<br />
finish options. <strong>Truth</strong> also offers a<br />
wide range of decorative “plated”<br />
finishes – contact <strong>Truth</strong> for additional<br />
information on availability of these<br />
finishes on specific product lines.<br />
ORDERING INFORMATION:<br />
1. Order Keepers by part number.<br />
Refer to lock section for details on<br />
A and D dimensions.<br />
2. Specify finish number.<br />
5
17 TRIMLINE<br />
CAM <strong>LOCK</strong> KEEPERS<br />
FIG. 1 40368.XX KEEPER<br />
.330<br />
[8.4 mm]<br />
2.062<br />
[52.4 mm]<br />
.174<br />
[4.4 mm]<br />
.536<br />
[13.6 mm]<br />
RECOMMENDED SCREWS:<br />
WOOD: (QTY 2) (P/N 19050) #6 X .750<br />
PHILLIPS FLAT HEAD, SHEET METAL<br />
SCREWS<br />
PVC/METAL: (QTY 2) #6 PHILLIPS, FLAT HEAD SCREWS<br />
(LENGTH AND THREAD TYPE TO DETERMINED<br />
BY PROFILE)<br />
2.593<br />
[65.9 mm]<br />
AVAILABLE<br />
<strong>LOCK</strong>S<br />
A<br />
17.32 .610 (15.5mm)<br />
17.33<br />
17.34<br />
17.35<br />
.860 (21.8mm)<br />
.610 (15.5mm)<br />
.860 (21.8mm)<br />
FIG. 2 40380.XX KEEPER<br />
.153<br />
[3.9 mm]<br />
2.062<br />
[52.4 mm]<br />
.309<br />
[7.8 mm]<br />
.442<br />
[11.2 mm]<br />
RECOMMENDED SCREWS:<br />
WOOD: (QTY 2) (P/N 19050) #6 X .750 PHILLIPS<br />
FLAT HEAD, SHEET METAL SCREWS<br />
PVC/METAL: (QTY 2) #6 PHILLIPS, FLAT HEAD SCREWS<br />
(LENGTH AND THREAD TYPE TO DETERMINED<br />
BY PROFILE)<br />
2.594<br />
[65.9 mm]<br />
AVAILABLE<br />
<strong>LOCK</strong>S<br />
A<br />
17.32 .610 (15.5mm)<br />
17.33<br />
17.34<br />
17.35<br />
.860 (21.8mm)<br />
.610 (15.5mm)<br />
.860 (21.8mm)<br />
FIG. 3 40904.XX KEEPER<br />
2.062<br />
[52.4 mm]<br />
.156<br />
[4.0 mm]<br />
.312<br />
[7.9 mm]<br />
.442<br />
[11.2 mm]<br />
5a<br />
RECOMMENDED SCREWS:<br />
WOOD: (QTY 2) (P/N 19050) #6 X .750 PHILLIPS<br />
FLAT HEAD, SHEET METAL SCREWS<br />
PVC/METAL: (QTY 2) #6 PHILLIPS, FLAT HEAD SCREWS<br />
(LENGTH AND THREAD TYPE TO DETERMINED<br />
BY PROFILE)<br />
2.586<br />
[65.7 mm]<br />
AVAILABLE<br />
<strong>LOCK</strong>S<br />
A<br />
17.38 .610 (15.5mm)<br />
17.39<br />
17.40<br />
17.41<br />
17.43<br />
.860 (21.8mm)<br />
.610 (15.5mm)<br />
.860 (21.8mm)<br />
.610 (15.5mm)
17 TRIMLINE<br />
CAM <strong>LOCK</strong> KEEPERS<br />
FIG. 4 40375.XX TRIMLINE KEEPER<br />
.182<br />
[4.6 mm]<br />
1.510<br />
[38.4 mm]<br />
D<br />
1.037<br />
[26.4 mm]<br />
NOTE:<br />
<strong>LOCK</strong>S WITH<br />
LARGER CAM MAY<br />
INTERFERE WITH GLASS<br />
.436<br />
RECOMMENDED SCREWS:<br />
[11.1 mm]<br />
WOOD: (QTY 2) #10 X .750 PHILLIPS<br />
PAN HEAD, SHEET METAL SCREWS<br />
PVC/METAL: (QTY 2) #10 PHILLIPS, PAN<br />
HEAD SCREWS (LENGTH AND THREAD<br />
TYPE TO DETERMINED BY PROFILE)<br />
.170<br />
[4.3 mm]<br />
.453<br />
[11.5 mm]<br />
.100<br />
[2.5 mm]<br />
AVAILABLE<br />
<strong>LOCK</strong>S<br />
ALL<br />
TRIMLINE<br />
<strong>LOCK</strong>S<br />
D<br />
.864 (21.8mm)<br />
FIG. 5 41298.XX TRIMLINE KEEPER<br />
1.770<br />
[45.0 mm]<br />
.500<br />
[12.7 mm]<br />
D<br />
E<br />
.182<br />
[4.6 mm]<br />
.170<br />
[4.3 mm]<br />
NOTE:<br />
<strong>LOCK</strong>S WITH<br />
LARGER CAM MAY<br />
INTERFERE WITH GLASS<br />
RECOMMENDED SCREWS:<br />
WOOD: (QTY 2) (P/N 19050) #6 X<br />
.750 PHILLIPS FLAT HEAD,<br />
SHEET METAL SCREWS<br />
PVC/METAL: (QTY 2) #6 PHILLIPS, FLAT<br />
HEAD SCREWS (LENGTH AND THREAD<br />
TYPE TO DETERMINED BY PROFILE)<br />
1.000<br />
[25.4 mm]<br />
AVAILABLE<br />
<strong>LOCK</strong>S<br />
ALL<br />
TRIMLINE<br />
<strong>LOCK</strong>S<br />
.090<br />
[2.3 mm]<br />
D<br />
1.062 (27.0mm)<br />
E<br />
.562 (14.3mm)<br />
FIG. 6 40670.XX TRIMLINE KEEPER<br />
1.749<br />
[44.4 mm]<br />
.156<br />
[4.0 mm]<br />
D<br />
1.317<br />
[33.5 mm]<br />
RECOMMENDED SCREWS:<br />
WOOD: (QTY 2) (P/N 19050) #6 X .750<br />
PHILLIPS FLAT HEAD, SHEET<br />
METAL SCREWS<br />
.876<br />
[22.3 mm]<br />
PVC/METAL: (QTY 2) #6 PHILLIPS, FLAT<br />
HEAD SCREWS (LENGTH AND THREAD<br />
TYPE TO DETERMINED BY PROFILE)<br />
.312<br />
[7.9 mm]<br />
NOTE:<br />
<strong>LOCK</strong>S WITH<br />
LARGER CAM MAY<br />
INTERFERE WITH GLASS<br />
AVAILABLE<br />
<strong>LOCK</strong>S<br />
17.38<br />
17.39<br />
17.40<br />
17.41<br />
17.43<br />
D<br />
.348 (8.9mm)<br />
5b
17 TRIMLINE<br />
CAM <strong>LOCK</strong> KEEPERS<br />
FIG. 7 45076.XX KEEPER (narrow flat base)<br />
2.156<br />
[54.8 mm]<br />
.125<br />
[3.2 mm]<br />
.265<br />
[6.7 mm]<br />
2.594<br />
[65.9 mm]<br />
.442<br />
[11.2 mm]<br />
RECOMMENDED SCREWS:<br />
WOOD: (QTY 2) #6 WITH A #5 HEAD X .750 PHILLIPS<br />
FLAT HEAD, SHEET METAL SCREWS.<br />
PVC/METAL: (QTY 2) #6 WITH A #5 HEAD PHILLIPS,<br />
FLAT HEAD SCREWS (LENGTH AND THREAD TYPE<br />
TO DETERMINED BY PROFILE)<br />
AVAILABLE<br />
<strong>LOCK</strong>S<br />
17.39<br />
17.40<br />
A<br />
.812 (20.6mm)<br />
.562 (14.3mm)<br />
FIG. 8 45184.XX KEEPER (narrow flat base)<br />
2.062<br />
[52.4 mm]<br />
.125<br />
[3.2 mm]<br />
.250<br />
[6.4 mm]<br />
RECOMMENDED SCREWS:<br />
2.594<br />
[65.9 mm]<br />
WOOD: (QTY 2) #6 WITH A #4 HEAD X .750 PHILLIPS<br />
FLAT HEAD, SHEET METAL SCREWS.<br />
PVC/METAL: (QTY 2) #6 WITH A #4 HEAD PHILLIPS,<br />
FLAT HEAD SCREWS (LENGTH AND THREAD TYPE<br />
TO DETERMINED BY PROFILE)<br />
.457<br />
[11.6 mm]<br />
AVAILABLE<br />
<strong>LOCK</strong>S<br />
17.33<br />
17.34<br />
A<br />
.828 (21.0mm)<br />
.578 (14.7mm)<br />
5c<br />
700 WEST BRIDGE STREET, OWATONNA, MN 55060 n 507.451.5620 800.866.7884 n TRUTH.COM
DOUBLE HUNG<br />
SLIDER 9400 <strong>SASH</strong> <strong>LOCK</strong> & KEEPERS 6<br />
One of the most popular locking designs<br />
in the slider and single/double-hung<br />
markets, <strong>Truth</strong> <strong>Hardware</strong>’s 9400 Series<br />
Sash Lock is one of the most reliable<br />
products available.<br />
• Concealed locking mechanisms help<br />
protect moving parts from dust and<br />
dirt for added lock life while<br />
producing a better seal of the sash<br />
at the head and sill.<br />
• The internal cam eliminates<br />
unsightly paint abrasions caused by<br />
the interaction of cam and keeper.<br />
• The internal cam’s are “handed” and<br />
come in various sizes that relate to<br />
the amount of pull-in/reach-out and<br />
sash lift. These “lock-up”<br />
characteristics produce a better seal<br />
of the sash at the head and sill to<br />
help decrease air infiltration.<br />
• The location of the mounting holes<br />
on the base are designed to secure<br />
the lock in a position along the check<br />
rail which affords the most holding<br />
power (See <strong>Truth</strong> Tip #4).<br />
• These locks are available with or<br />
without alignment lugs. These lugs<br />
have been designed to help prevent<br />
shifting of the rails during locking<br />
for an enhanced window seal.<br />
Tapered “nesting” lugs, which help<br />
guide the lock to the keeper are also<br />
an option.<br />
WARRANTY:<br />
Protected under the terms of the “<strong>Truth</strong><br />
Warranty for Window & Door<br />
Manufacturers & Authorized<br />
Distributors”. Refer to <strong>Truth</strong>’s Terms<br />
& Conditions for further details.<br />
LOGO OPTIONS: For that<br />
“personalized touch”, <strong>Truth</strong>’s 9400<br />
Series Sash Locks are capable of<br />
accepting your companyís name or<br />
logo. <strong>Truth</strong>’s logo reproduction<br />
processes is an attractive way of<br />
highlighting your company signature.<br />
MATERIAL: High-pressure, corrosion<br />
resistant, die-cast zinc.<br />
FINISH: Electrostatically applied,<br />
durable coatings that provide excellent<br />
resistance to chipping, scratching and<br />
corrosion while maintaining color<br />
stability for years in direct sunlight.<br />
Please refer to <strong>Truth</strong>’s Color Chart for<br />
examples of <strong>Truth</strong>’s most popular<br />
finish options. <strong>Truth</strong> also offers a wide<br />
range of decorative “plated” finishes –<br />
contact <strong>Truth</strong> for additional<br />
information on availability of these<br />
finishes on specific product lines.<br />
ORDERING INFORMATION:<br />
1. Identify the style of “base” desired<br />
(specify by part number).<br />
2. Identify the style of “cam” desired.<br />
Note these cams are “handed” (specify<br />
by part number).<br />
3. Order the 9400 Series assembled<br />
base unit that has this configuration.<br />
<strong>Truth</strong> <strong>Hardware</strong> Sales Team can help<br />
you identify this part number.<br />
4. Order the 9400 Series style of<br />
“keeper” desired (specify by part<br />
number).<br />
5. Specify finish choice.<br />
RECOMMENDED SCREWS:<br />
Types of screws required determined<br />
by material of profile used (sold<br />
separately). For additional information<br />
on screw selection – see <strong>Truth</strong> Tips.<br />
TRUTH TIPS:<br />
1. A lock with pick-resistant<br />
alignment lugs should be used<br />
whenever possible. A lock without<br />
lugs should be chosen when the lugs<br />
cause interference with divided light<br />
grills or other window features.<br />
2. When two locks are used on one<br />
window, the placement of each lock,<br />
with respect to its keeper, becomes<br />
very critical to maintain a constant<br />
weatherseal on all sides of the window<br />
and to insure that each lock engages<br />
properly with its keeper.<br />
3. For accurate hardware placement in<br />
vinyl or metal applications, pre-drilling<br />
of the window profile is recommended.<br />
4. For vinyl window applications,<br />
mounting screws should pass through<br />
two PVC walls, or one PVC wall and<br />
one insert wall. For this reason, it may<br />
be necessary to use a longer screw than<br />
is recommended.<br />
5. For metal window profiles, <strong>Truth</strong><br />
recommends stainless steel machine<br />
screws. However, in most<br />
applications, stainless steel sheet metal<br />
screws will provide adequate holding<br />
power.<br />
INCLUDE TRUTH SPECS ON<br />
YOUR NEXT WINDOW PROJECT<br />
Window check rail locks shall be<br />
included which will increase both<br />
security and weather seal tightness.<br />
The lock must provide easy operation<br />
and positive locked feel.<br />
Window check rail locks will be of<br />
internal cam design to provide<br />
optimum sealing of the meeting rails.<br />
The lock and accompanying keeper<br />
will prevent misalignment during<br />
locking. The lock and keeper shall be<br />
constructed of high pressure zinc alloy<br />
die castings.<br />
Window locks shall be 9400 Series<br />
Sash Locks as manufactured by <strong>Truth</strong><br />
<strong>Hardware</strong>.
9400<br />
<strong>SASH</strong> <strong>LOCK</strong> & KEEPERS<br />
FIG. 1 <strong>SASH</strong> <strong>LOCK</strong> AND KEEPER<br />
.437<br />
[11.1 mm]<br />
2.062<br />
[52.4 mm]<br />
1.120<br />
[28.4 mm]<br />
NIBS<br />
NESTING NIBS<br />
1.700<br />
[43.2 mm]<br />
RIGHT HAND SHOWN<br />
.820<br />
[20.8 mm]<br />
2.578<br />
[65.5 mm]<br />
CAM PULL-IN .060<br />
HANDING<br />
NIBS<br />
RECOMMENDED SCREWS:<br />
PART<br />
NUMBER<br />
A09400400<br />
A09400401<br />
A09400444<br />
RH<br />
X<br />
X<br />
X<br />
LH<br />
NO<br />
NIBS<br />
X<br />
NIBS<br />
X<br />
NESTING<br />
NIBS<br />
X<br />
WOOD: (QTY 2) (P/N 19050) #6 X .750<br />
PHILLIPS FLAT HEAD SHEET METAL<br />
SCREWS<br />
PVC/METAL: (QTY 2) #6 PHILLIPS FLAT HEAD<br />
SCREW (LENGTH AND THREAD TYPE<br />
TO BE DETERMINED BY PROFILE)<br />
FIG. 2 C09405.XX KEEPER<br />
2.062<br />
[52.4 mm]<br />
.310<br />
[7.9 mm]<br />
.155<br />
[3.9 mm]<br />
.505<br />
[12.8 mm]<br />
2.578<br />
[65.5 mm]<br />
RECOMMENDED SCREWS:<br />
WOOD: (QTY 2) (P/N 19050) #6 X .750<br />
PHILLIPS FLAT HEAD SHEET METAL<br />
SCREWS<br />
PVC/METAL: (QTY 2) #6 PHILLIPS FLAT HEAD<br />
SCREW (LENGTH AND THREAD TYPE<br />
TO BE DETERMINED BY PROFILE)<br />
AVAILABLE<br />
<strong>LOCK</strong>S<br />
A09400400<br />
6a
9400 <strong>SASH</strong> <strong>LOCK</strong> & KEEPERS 6b<br />
FIG. 3 C09603.XX KEEPER<br />
2.062<br />
[52.4 mm]<br />
.310<br />
[7.9 mm]<br />
.155<br />
[3.9 mm]<br />
.505<br />
[12.8 mm]<br />
RECOMMENDED SCREWS:<br />
WOOD: (QTY 2) (P/N 19050) #6 X .750<br />
PHILLIPS FLAT HEAD SHEET METAL<br />
SCREWS<br />
PVC/METAL: (QTY 2) #6 PHILLIPS FLAT HEAD<br />
SCREW (LENGTH AND THREAD TYPE<br />
TO BE DETERMINED BY PROFILE)<br />
2.578<br />
[65.5 mm]<br />
AVAILABLE<br />
<strong>LOCK</strong>S<br />
A09400401<br />
FIG. 4 C30063.XX KEEPER<br />
2.126<br />
[54.0 mm]<br />
.312<br />
[7.9 mm]<br />
.156<br />
[4.0 mm]<br />
.375<br />
[9.5 mm]<br />
2.840<br />
[72.1 mm]<br />
.575<br />
[14.6 mm]<br />
.755<br />
[19.2 mm]<br />
RECOMMENDED SCREWS:<br />
WOOD: (QTY 2) (P/N 19050) #6 X .750<br />
PHILLIPS FLAT HEAD SHEET METAL<br />
SCREWS<br />
PVC/METAL: (QTY 2) #6 PHILLIPS FLAT HEAD<br />
SCREW (LENGTH AND THREAD TYPE<br />
TO BE DETERMINED BY PROFILE)<br />
AVAILABLE<br />
<strong>LOCK</strong>S<br />
A09400444<br />
FIG. 5 41404 KEEPER<br />
2.125<br />
[54.0 mm]<br />
.223<br />
[5.7 mm]<br />
RECOMMENDED SCREWS:<br />
(QTY 2)#6 SHEET METAL SCREWS WITH<br />
#5 HEAD, PHIILIPS FLAT HEAD<br />
SCREWS. (LENGTH AND THREAD TYPE<br />
TO BE DETERMINED BY PROFILE)<br />
2.578<br />
[65.5 mm]<br />
.226<br />
[5.8 mm]<br />
.505<br />
[12.8 mm]<br />
.350<br />
[8.9 mm]
9400<br />
<strong>SASH</strong> <strong>LOCK</strong> & KEEPERS<br />
6c 700 WEST BRIDGE STREET, OWATONNA, MN 55060 n 507.451.5620 800.866.7884 n TRUTH.COM
DOUBLE HUNG<br />
SLIDER<br />
17 ENTRYGARD® II<br />
CAM <strong>LOCK</strong><br />
Designed for use on slider and<br />
single/double-hung windows, the<br />
EntryGard ® and EntryGard II Cam<br />
Lock’s concealed locking mechanisms<br />
help protect moving parts from dust<br />
and dirt for added lock life while<br />
producing a better seal of the sash at<br />
the head and sill. The internal cam<br />
eliminates paint abrasions and produces<br />
a .125” (3.2 mm) pull-in with a .156”<br />
(4.0 mm) lifting ability. Air infiltration<br />
has been substantially reduced by<br />
pulling the meeting rails tightly together.<br />
ENTRYGARD ® II<br />
The EntryGard II Check Rail Lock<br />
features a sleek and stylish new handle<br />
design, and has been designed such that<br />
the lock’s back plate could be eliminated<br />
without compromising the strength or<br />
performance of this product. An<br />
improved detent in the handle motion of<br />
the EntryGard II, assures the user that<br />
the cam is either fully open or closed.<br />
ENTRYGARD ® SNAP-BACK<br />
<strong>LOCK</strong><br />
This double hung/slider lock has the<br />
ability to retract the cam when the<br />
handle motion is within approximately<br />
30 degrees of the open position. The<br />
spring action of the handle and the cam<br />
will eliminate exposing the cam when<br />
in the partially open position, thus<br />
avoiding interference with divided light<br />
grilles and/or crashing on the top rail.<br />
These locks are available with or<br />
without alignment lugs. These lugs<br />
have been designed to help prevent<br />
shifting of the rails during locking for<br />
an enhanced window seal. Spring action<br />
holds handle in locked or unlocked<br />
position to prevent damage to windows.<br />
SECURITY & RELIABILITY:<br />
The pick-resistant design of this lock<br />
helps you exceed the load requirements<br />
for AAMA 1302.5 Forced Entry<br />
Resistance Test, the California Model<br />
Building Security Ordinance and<br />
ASTM-588 Forced Entry Test.<br />
Additional Keepers for special profile<br />
applications are also available - refer to<br />
EntryGard Keeper page for further<br />
information.<br />
WARRANTY: Protected under the<br />
terms of the <strong>Truth</strong> Warranty for Window<br />
& Door Manufacturers & Authorized<br />
Distributors. Refer to <strong>Truth</strong>’s Terms &<br />
Conditions for further details.<br />
LOGO OPTIONS: For that<br />
“personalized touch”, <strong>Truth</strong>’s EntryGard<br />
Check Rail Locks are capable of<br />
accepting your company’s name or<br />
logo. <strong>Truth</strong>’s unique custom print logo<br />
reproduction processes is an attractive<br />
way of highlighting your company<br />
signature. For further details on where<br />
your company’s logo would appear,<br />
please refer to the following drawings.<br />
MATERIAL: High-pressure, corrosion<br />
resistant, die-cast zinc.<br />
FINISH: Electrostatically applied,<br />
durable coatings that provide excellent<br />
resistance to chipping, scratching and<br />
corrosion while maintaining color<br />
stability for years in direct sunlight.<br />
Please refer to <strong>Truth</strong>’s Color Chart for<br />
examples of <strong>Truth</strong>’s most popular finish<br />
options. <strong>Truth</strong> also offers a wide range<br />
of decorative “plated” finishes –<br />
contact <strong>Truth</strong> for additional information<br />
on availability of these finishes on<br />
specific product lines.<br />
ORDERING INFORMATION:<br />
1. Choose cam lock style desired (see<br />
table below).<br />
2. Specify finish number.<br />
3. Select mounting hardware required<br />
(sold separately): For Keeper styles -<br />
see EntryGard Keeper section.<br />
RECOMMENDED SCREWS:<br />
Types of screws required determined by<br />
material of profile used. Refer to<br />
drawings for complete information on<br />
screw type and quantity needed (sold<br />
separately). For additional information<br />
regarding screw selection, refer to<br />
EntryGard ® Keeper catalog page for<br />
styles and part numbers.<br />
TRUTH TIPS:<br />
1. A lock with pick-resistant alignment<br />
lugs should be used whenever possible.<br />
A lock without lugs should be chosen<br />
when the lugs cause interference with<br />
divided light grills or other window<br />
features.<br />
2. When two locks are used on one<br />
window, the placement of each lock,<br />
with respect to its keeper, becomes very<br />
critical to maintain a constant<br />
weatherseal on all sides of the window<br />
and to insure that each lock engages<br />
properly with its keeper.<br />
3. For accurate hardware placement in<br />
vinyl or metal applications, pre-drilling<br />
of the window profile is recommended.<br />
4. For vinyl window applications,<br />
mounting screws should pass through<br />
two PVC walls, or one PVC wall and<br />
one insert wall. For this reason, it may<br />
be necessary to use a longer screw than<br />
is recommended.<br />
5. For metal window profiles, <strong>Truth</strong><br />
recommends stainless steel machine<br />
screws. However, in most applications,<br />
stainless steel sheet metal screws will<br />
provide adequate holding power.<br />
INCLUDE TRUTH SPECS ON<br />
YOUR NEXT WINDOW PROJECT<br />
Window check rail locks shall be<br />
included which will increase both<br />
security and weather seal tightness.<br />
The lock must provide easy operation<br />
and positive locked feel (detent).<br />
Window check rail locks will be of<br />
internal cam design to provide .125”<br />
(3.2 mm) of pull-in to aid in sealing the<br />
meeting rails. The lock and<br />
accompanying keeper will prevent misalignment<br />
during locking. The lock<br />
and keeper shall be constructed of high<br />
pressure zinc alloy die castings.<br />
Window locks shall be 17 series<br />
EntryGard ® as manufactured by <strong>Truth</strong><br />
7
17 ENTRYGARD® II<br />
CAM <strong>LOCK</strong><br />
FIG. 1 APPLICATION OF TRUTH ENTRYGARD AND ENTRYGARD II CHECK RAIL <strong>LOCK</strong><br />
2.061<br />
[52.3 mm]<br />
A<br />
1.125<br />
[28.6 mm]<br />
SURFACE MOUNTED KEEPER<br />
1.624<br />
[41.3 mm]<br />
2.593<br />
[65.9 mm]<br />
D<br />
GLASS<br />
.844<br />
[21.4 mm]<br />
FACE MOUNTED KEEPER<br />
.500<br />
[12.7 mm]<br />
CHECKRAIL<br />
RECOMMENDED SCREWS:<br />
TOP AREA<br />
FRONT AREA<br />
"CUSTOME PRINT"<br />
LOGO AREAS AVAILABLE<br />
(FULL SCALE)<br />
WOOD: (QTY 2) (P/N 19050) #7 X .750 PHILLIPS,<br />
FLAT HEAD, SHEET METAL SCREWS.<br />
PVC/METAL: (QTY 2) #7 PHILLIPS, FLAT HEAD SCREWS<br />
(LENGTH AND THREAD TYPE TO BE DETERMINED<br />
BY PROFILE)<br />
FIG. 2 ENTRYGARD AND ENTRYGARD II CHECK RAIL <strong>LOCK</strong>S<br />
B<br />
ALIGNMENT<br />
LUGS<br />
CAM<br />
C<br />
NOTE:<br />
ALL <strong>LOCK</strong>S HAVE<br />
.125 PULL-IN.<br />
PRODUCT<br />
NUMBER<br />
B<br />
C<br />
WITH<br />
LUGS<br />
WITHOUT<br />
LUGS<br />
TYPE<br />
17.67<br />
X EG II<br />
17.68<br />
X<br />
EG II<br />
17.70<br />
X EG<br />
17.74 .438 (11.1mm) 2.062 (52.4mm) X<br />
EG<br />
17.19<br />
X<br />
EG<br />
17.23<br />
X EG<br />
17.30 .688 (17.5mm) 1.875 (47.6mm) X<br />
EG<br />
17.31 .688 (17.5mm) 1.875 (47.6mm)<br />
X EG<br />
17.92 .688 (17.5mm) 1.875 (47.6mm) X<br />
EG II<br />
SPECIAL<br />
FEATURES<br />
SNAP BACK <strong>LOCK</strong><br />
SNAP BACK <strong>LOCK</strong><br />
7a<br />
700 WEST BRIDGE STREET, OWATONNA, MN 55060 n 507.451.5620 800.866.7884 n TRUTH.COM
DOUBLE HUNG<br />
SLIDER<br />
17 ENTRYGARD®<br />
CAM <strong>LOCK</strong> KEEPERS<br />
There is a wide variety of profiles in<br />
the marketplace today, and with each<br />
of these, there is the potential for a<br />
unique mounting application. No one<br />
Keeper will work in every situation<br />
and because of this, <strong>Truth</strong> has<br />
developed a wide variety of shapes and<br />
styles to help meet these needs. The<br />
Keepers in the accompanying drawings<br />
represent all of the Keepers that <strong>Truth</strong><br />
has developed for use with the<br />
EntryGard ® Cam Locks. These<br />
drawings should provide you with all<br />
the technical information you may<br />
require. However, if you wish further<br />
technical assistance in selecting a<br />
Keeper, please contact <strong>Truth</strong>.<br />
WARRANTY:<br />
Protected under the terms of the<br />
<strong>Truth</strong> Warranty for Window & Door<br />
Manufacturers & Authorized<br />
Distributors. Refer to <strong>Truth</strong>’s Terms<br />
& Conditions for further details.<br />
TRUTH TIPS:<br />
1. For accurate hardware placement in<br />
vinyl or metal applications, pre-drilling<br />
of the window profile is recommended.<br />
2. For vinyl window applications,<br />
mounting screws should pass through<br />
two PVC walls, or one PVC wall and<br />
one insert wall. For this reason, it may<br />
be necessary to use a longer screw than<br />
is recommended.<br />
3. For metal window profiles, <strong>Truth</strong><br />
recommends stainless steel machine<br />
screws. However, in most<br />
applications, stainless steel sheet metal<br />
screws will provide adequate holding<br />
power.<br />
MATERIAL: High-pressure, corrosion<br />
resistant, die-cast zinc.<br />
FINISH: Electrostatically applied,<br />
durable coatings that provide excellent<br />
resistance to chipping, scratching and<br />
corrosion while maintaining color<br />
stability for years in direct sunlight.<br />
Please refer to <strong>Truth</strong>’s Color Chart for<br />
examples of <strong>Truth</strong>’s most popular<br />
finish options. <strong>Truth</strong> also offers a<br />
wide range of decorative “plated”<br />
finishes – contact <strong>Truth</strong> for additional<br />
information on availability of these<br />
finishes on specific product lines.<br />
RECOMMENDED SCREWS:<br />
Types of screws required determined<br />
by material of profile used. Refer to<br />
drawings for complete information on<br />
screw type and quantity needed (sold<br />
separately). For additional information<br />
regarding screw selection - see <strong>Truth</strong><br />
Tips.<br />
ORDERING INFORMATION:<br />
1. Order Keepers by part number.<br />
Refer to lock section for details on<br />
A and D dimensions.<br />
2. Specify finish number.<br />
8
17 ENTRYGARD®<br />
CAM <strong>LOCK</strong> KEEPERS<br />
FIG. 1 40670.XX KEEPER (face mounted)<br />
.156<br />
[4.0 mm]<br />
1.749<br />
[44.4 mm]<br />
1.318<br />
[33.5 mm]<br />
NOTE:<br />
CAM MAY INTERFERE<br />
WITH GLASS<br />
.312<br />
[7.9 mm]<br />
D<br />
AVAILABLE<br />
<strong>LOCK</strong>S<br />
D<br />
RECOMMENDED SCREWS:<br />
WOOD: (QTY 2) (P/N 19050) #6 X .750<br />
PHILLIPS,FLAT HEAD SHEET METAL<br />
SCREWS<br />
PVC/METAL: (QTY 2) #6 PHILLIPS, FLAT HEAD<br />
SCREWS (LENGTH AND THREAD TYPE<br />
TO BE DETERMINED BY PROFILE)<br />
.876<br />
[22.3 mm]<br />
.080<br />
[2.0 mm]<br />
17.23<br />
17.31<br />
17.66 .348 (8.8mm)<br />
17.67<br />
17.70<br />
FIG. 2 40375.XX KEEPER (face mounted)<br />
NOTE:<br />
CAM MAY INTERFERE<br />
WITH GLASS<br />
.182<br />
[4.6 mm]<br />
1.037<br />
[26.4 mm]<br />
1.510<br />
[38.4 mm]<br />
.170<br />
[4.3 mm]<br />
D<br />
RECOMMENDED SCREWS:<br />
WOOD: (QTY 2) #10 X .750 PHILLIPS,<br />
PAN HEAD SHEET METAL SCREWS<br />
PVC/METAL: (QTY 2) #10 PHILLIPS, PAN HEAD<br />
SCREWS (LENGTH AND THREAD TYPE<br />
TO BE DETERMINED BY PROFILE)<br />
.453<br />
[11.5 mm]<br />
.436<br />
[11.1 mm]<br />
AVAILABLE<br />
<strong>LOCK</strong>S<br />
ALL<br />
ENTRYGARD<br />
<strong>LOCK</strong>S<br />
.100<br />
[2.5 mm]<br />
D<br />
.864 (21.9mm)<br />
FIG. 3 41298.XX KEEPER (face mounted)<br />
NOTE:<br />
.500<br />
[12.7 mm]<br />
.182<br />
[4.6 mm]<br />
CAM MAY INTERFERE<br />
WITH GLASS<br />
D<br />
E<br />
.170<br />
[4.3 mm]<br />
1.770<br />
[45.0 mm]<br />
8a<br />
RECOMMENDED SCREWS:<br />
WOOD: (QTY 2) (P/N 19050) #6 X .750<br />
PHILLIPS,FLAT HEAD SHEET METAL<br />
SCREWS<br />
PVC/METAL: (QTY 2) #6 PHILLIPS, FLAT HEAD<br />
SCREWS (LENGTH AND THREAD TYPE<br />
TO BE DETERMINED BY PROFILE)<br />
1.000<br />
[25.4 mm]<br />
AVAILABLE<br />
<strong>LOCK</strong>S<br />
ALL<br />
ENTRYGARD<br />
<strong>LOCK</strong>S<br />
D<br />
.864 (21.9mm)<br />
.090<br />
[2.3 mm]<br />
E<br />
.562 (14.3mm)
17 ENTRYGARD®<br />
CAM <strong>LOCK</strong> KEEPERS<br />
FIG. 4 40715.XX KEEPER (wide base and slant top)<br />
.250<br />
[6.4 mm]<br />
2.062<br />
[52.4 mm]<br />
.438<br />
[11.1 mm]<br />
RECOMMENDED SCREWS:<br />
WOOD: (QTY 2) (P/N 19100) #7 X .750<br />
PHILLIPS,FLAT HEAD SHEET METAL<br />
SCREWS<br />
.536<br />
[13.6 mm]<br />
2.578<br />
[65.5 mm]<br />
AVAILABLE<br />
<strong>LOCK</strong>S<br />
17.19 .704 (17.9mm)<br />
17.30 .954 (24.2mm)<br />
17.68 .704 (17.9mm)<br />
A<br />
PVC/METAL: (QTY 2) #7 PHILLIPS, FLAT HEAD<br />
SCREWS (LENGTH AND THREAD TYPE<br />
TO BE DETERMINED BY PROFILE)<br />
17.69 .704 (17.9mm)<br />
17.74 .704 (17.9mm)<br />
FIG. 5 45070.XX KEEPER (flat base, beveled edge, slotted holes)<br />
.270<br />
[6.9 mm]<br />
2.060<br />
[52.3 mm]<br />
.135<br />
[3.4 mm]<br />
.538<br />
[13.7 mm]<br />
RECOMMENDED SCREWS:<br />
WOOD: (QTY 2) (P/N 19100) #7 X .750<br />
PHILLIPS,FLAT HEAD SHEET METAL<br />
SCREWS<br />
PVC/METAL: (QTY 2) #7 PHILLIPS, FLAT HEAD<br />
SCREWS (LENGTH AND THREAD TYPE<br />
TO BE DETERMINED BY PROFILE)<br />
2.594<br />
[65.9 mm]<br />
AVAILABLE<br />
<strong>LOCK</strong>S<br />
A<br />
17.19 .704 (17.9mm)<br />
17.30 .954 (24.2mm)<br />
17.68 .704 (17.9mm)<br />
17.69 .704 (17.9mm)<br />
17.74 .704 (17.9mm)<br />
FIG. 6 45131.XX KEEPER (narrow flat base)<br />
.312<br />
[7.9 mm]<br />
2.060<br />
[52.3 mm]<br />
.156<br />
[4.0 mm]<br />
.536<br />
[13.6 mm]<br />
RECOMMENDED SCREWS:<br />
WOOD: (QTY 2) (P/N 19050) #6 X .750<br />
PHILLIPS,FLAT HEAD SHEET METAL<br />
SCREWS<br />
2.590<br />
[65.8 mm]<br />
AVAILABLE<br />
<strong>LOCK</strong>S<br />
A<br />
17.19 .704 (17.9mm)<br />
17.30 .954 (24.2mm)<br />
17.68 .704 (17.9mm)<br />
PVC/METAL: (QTY 2) #6 PHILLIPS, FLAT HEAD<br />
SCREWS (LENGTH AND THREAD TYPE<br />
TO BE DETERMINED BY PROFILE)<br />
17.69 .704 (17.9mm)<br />
17.74 .704 (17.9mm)<br />
8b
17 ENTRYGARD®<br />
CAM <strong>LOCK</strong> KEEPERS<br />
FIG. 7 40320.XX KEEPER (notched narrow base)<br />
.311<br />
[7.9 mm]<br />
2.062<br />
[52.4 mm]<br />
.156<br />
[4.0 mm]<br />
.531<br />
[13.5 mm]<br />
2.594<br />
[65.9 mm]<br />
RECOMMENDED SCREWS:<br />
WOOD: (QTY 2) (P/N 19050) #6 X .750<br />
PHILLIPS,FLAT HEAD SHEET METAL<br />
SCREWS<br />
PVC/METAL: (QTY 2) #6 PHILLIPS, FLAT HEAD<br />
SCREWS (LENGTH AND THREAD TYPE<br />
TO BE DETERMINED BY PROFILE)<br />
AVAILABLE<br />
<strong>LOCK</strong>S<br />
17.19<br />
A<br />
.610 (15.5mm)<br />
17.30 .860 (21.8mm)<br />
17.68 .610 (15.5mm)<br />
17.74 .610 (15.5mm)<br />
FIG. 8 40367.XX KEEPER (without alignment lug slots)<br />
.440<br />
[11.2 mm]<br />
2.061<br />
[52.3 mm]<br />
.250<br />
[6.4 mm]<br />
.530<br />
[13.5 mm]<br />
2.590<br />
[65.8 mm]<br />
RECOMMENDED SCREWS:<br />
WOOD: (QTY 2) (P/N 19050) #7 X .750<br />
PHILLIPS,FLAT HEAD SHEET METAL<br />
SCREWS<br />
PVC/METAL: (QTY 2) #7 PHILLIPS, FLAT HEAD<br />
SCREWS (LENGTH AND THREAD TYPE<br />
TO BE DETERMINED BY PROFILE)<br />
AVAILABLE<br />
<strong>LOCK</strong>S<br />
17.23<br />
17.31<br />
17.66<br />
17.67<br />
17.70<br />
A<br />
.704 (17.9mm)<br />
.954 (24.2mm)<br />
.704 (17.9mm)<br />
.704 (17.9mm)<br />
.704 (17.9mm)<br />
8c<br />
700 WEST BRIDGE STREET, OWATONNA, MN 55060 n 507.451.5620 800.866.7884 n TRUTH.COM
DOUBLE HUNG<br />
SLIDER 17.04 <strong>SASH</strong> <strong>LOCK</strong> 9<br />
Modeled after <strong>Truth</strong>’s popular 9400<br />
and EntryGard Series sash locks, the<br />
17.04 Series Lock is an excellent<br />
option for either single or double-hung<br />
style windows. Designed with a<br />
slightly different mounting hole pattern<br />
than its predecessors, the 17.04 is<br />
designed easily adaptable to most<br />
window profiles in the market today.<br />
• Concealed locking mechanisms help<br />
protect moving parts from dust and dirt<br />
for added lock life while producing a<br />
better seal of the sash at the head and sill.<br />
• The internal cam eliminates unsightly<br />
paint abrasions caused by the<br />
interaction of cam and keeper.<br />
• These locks are available with or<br />
without alignment lugs. These lugs<br />
have been designed to help prevent<br />
shifting of the rails during locking for<br />
an enhanced window seal. Tapered<br />
“nesting” lugs, which help guide the<br />
lock to the keeper are also an option.<br />
WARRANTY: Protected under the<br />
terms of the "<strong>Truth</strong> Warranty for<br />
Window & Door Manufacturers &<br />
Authorized Distributors". Refer to<br />
<strong>Truth</strong>’s Terms & Conditions for further<br />
details.<br />
LOGO OPTIONS: For that<br />
"personalized touch", <strong>Truth</strong>’s 17.04<br />
Series Sash Locks are capable of<br />
accepting your company’s name or<br />
logo. <strong>Truth</strong>’s logo reproduction<br />
processes is an attractive way of<br />
highlighting your company signature.<br />
MATERIAL: High-pressure, corrosion<br />
resistant, die-cast zinc.<br />
FINISH: Electrostatically applied,<br />
durable coatings that provide excellent<br />
resistance to chipping, scratching and<br />
corrosion while maintaining color<br />
stability for years in direct sunlight.<br />
Please refer to <strong>Truth</strong>’s Color Chart for<br />
examples of <strong>Truth</strong>’s most popular<br />
finish options. <strong>Truth</strong> also offers a wide<br />
range of decorative “plated” finishes –<br />
contact <strong>Truth</strong> for additional information<br />
on availability of these finishes on<br />
specific product lines.<br />
ORDERING INFORMATION:<br />
1. Order a 17.04 Series Lock.<br />
2. Order the 17.04 Series style of<br />
“keeper” desired (specify by part<br />
number).<br />
3.Specify finish choice.<br />
RECOMMENDED SCREWS:<br />
Types of screws required determined<br />
by material of profile used (sold<br />
separately). For additional information<br />
on screw selection – see <strong>Truth</strong> Tips.<br />
TRUTH TIPS:<br />
1. A lock with pick-resistant<br />
alignment lugs should be used<br />
whenever possible. A lock without<br />
lugs should be chosen when the lugs<br />
cause interference with divided light<br />
grills or other window features.<br />
2. When two locks are used on one<br />
window, the placement of each lock,<br />
with respect to its keeper, becomes<br />
very critical to maintain a constant<br />
weatherseal on all sides of the window<br />
and to insure that each lock engages<br />
properly with its keeper.<br />
3. For accurate hardware placement in<br />
vinyl or metal applications, pre-drilling<br />
of the window profile is recommended.<br />
4. For vinyl window applications,<br />
mounting screws should pass through<br />
two PVC walls, or one PVC wall and<br />
one insert wall. For this reason, it may<br />
be necessary to use a longer screw than<br />
is recommended.<br />
5. For metal window profiles, <strong>Truth</strong><br />
recommends stainless steel machine<br />
screws. However, in most applications,<br />
stainless steel sheet metal screws will<br />
provide adequate holding power.<br />
INCLUDE TRUTH SPECS IN<br />
YOUR NEXT WINDOW PROJECT<br />
Window check rail locks shall be<br />
included which will increase both<br />
security and weather seal tightness.<br />
The lock must provide easy operation<br />
and positive locked feel.<br />
Window check rail locks will be of<br />
internal cam design to provide<br />
optimum sealing of the meeting rails.<br />
The lock and accompanying keeper<br />
will prevent misalignment during<br />
locking. The lock and keeper shall be<br />
constructed of high pressure zinc alloy<br />
die castings.<br />
Window locks shall be 17.04 Series<br />
Sash Locks as manufactured by <strong>Truth</strong><br />
<strong>Hardware</strong>.
17.04<br />
<strong>SASH</strong> <strong>LOCK</strong><br />
FIG. 1 APPLICATION OF TRUTH 17.04<br />
FIG. 1 APPLICATION OF TRUTH 17.04<br />
2.202in<br />
55.9mm<br />
TOP MOUNTED KEEPER<br />
1.140in<br />
29.0mm<br />
2.062in<br />
52.4mm<br />
2.835in<br />
72.0mm<br />
1.786in<br />
45.4mm<br />
.460in<br />
11.7mm<br />
GLASS<br />
.810in<br />
20.6mm<br />
CHECK RAIL<br />
GLASS<br />
PRODUCT<br />
NUMBER<br />
SCREW HOLE<br />
SETBACK<br />
WITH NESTING<br />
NIBS<br />
WITHOUT NESTING<br />
NIBS<br />
17.04.XX.100<br />
.687"<br />
X<br />
17.04.XX.110<br />
.687"<br />
X<br />
17.04.XX.200<br />
.687"<br />
X<br />
17.04.XX.203<br />
.437"<br />
X<br />
17.04.XX.204<br />
.437"<br />
X<br />
RECOMMENDED SCREWS:<br />
WOOD: (QTY2) (P/N 19100) #7 X .750 PHILLIPS,<br />
FLAT HEAD, SHEET METAL SCREWS<br />
PVC/METAL: (QTY 2) #7 PHILLIPS, FLAT HEAD SCREWS<br />
(LENGTH AND THREAD TYPE TO BE DETERMINED<br />
BY PROFILE)<br />
9a
FIG. 3 C09417 KEEPER<br />
FIG. 4 41807 KEEPER<br />
17.04 <strong>SASH</strong> <strong>LOCK</strong> 9b<br />
FIG. 2 C09336 KEEPER<br />
FIG. 2 C09336 KEEPER<br />
.280<br />
7.1<br />
2.202<br />
55.9<br />
.140<br />
3.6<br />
AVAILABLE<br />
<strong>LOCK</strong>S<br />
A<br />
17.04.XX.100<br />
.827 (21.0mm)<br />
17.04.XX.110<br />
.827 (21.0mm)<br />
.480<br />
12.2<br />
17.04.XX.200<br />
.827 (21.0mm)<br />
17.04.XX.203<br />
.577 (14.7mm)<br />
17.04.XX.204<br />
.577 (14.7mm)<br />
2.840<br />
RECOMMENDED SCREWS:<br />
72.1<br />
(QTY 4) #6 PHILLIPS FLAT HEAD, SHEET METAL SCREWS<br />
(LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE)<br />
FIG. 3 C09417 KEEPER<br />
.250<br />
6.4<br />
2.250<br />
57.2<br />
.127<br />
3.2<br />
AVAILABLE<br />
<strong>LOCK</strong>S<br />
A<br />
17.04.XX.100<br />
.814 (20.7mm)<br />
17.04.XX.110<br />
.814 (20.7mm)<br />
.505<br />
12.8<br />
17.04.XX.200<br />
.814 (20.7mm)<br />
17.04.XX.203<br />
.561 (14.2mm)<br />
17.04.XX.204<br />
.561 (14.2mm)<br />
2.840<br />
RECOMMENDED SCREWS:<br />
72.1<br />
(QTY 4) #4 PHILLIPS FLAT HEAD, SHEET METAL SCREWS<br />
(LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE)<br />
FIG. 4 41807 KEEPER<br />
1.063<br />
27.0<br />
.312<br />
7.9 .155<br />
3.9<br />
.795<br />
20.2<br />
AVAILABLE<br />
<strong>LOCK</strong>S<br />
17.04.XX.100<br />
17.04.XX.110<br />
17.04.XX.200<br />
17.04.XX.203<br />
17.04.XX.204<br />
A<br />
.842 (21.4mm)<br />
.842 (21.4mm)<br />
.842 (21.4mm)<br />
.592 (15.0mm)<br />
.592 (15.0mm)<br />
RECOMMENDED SCREWS:<br />
(QTY 4) #6 PHILLIPS FLAT HEAD, SHEET METAL SCREWS<br />
(LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE)<br />
FIG. 5 C09213 KEEPER<br />
FIG. 5 C09213 KEEPER<br />
.180<br />
4.57<br />
2.840<br />
72.1<br />
AVAILABLE<br />
<strong>LOCK</strong>S<br />
A<br />
17.04.XX.100<br />
.832 (21.3mm)<br />
17.04.XX.110<br />
.832 (21.1mm)<br />
.130<br />
1.050<br />
17.04.XX.200<br />
.832 (21.1mm)<br />
3.3<br />
26.7<br />
17.04.XX.203<br />
.582 (14.8mm)<br />
17.04.XX.204<br />
.582 (14.8mm)<br />
1.000<br />
RECOMMENDED SCREWS:<br />
25.4<br />
(QTY 4) #6 PHILLIPS FLAT HEAD, SHEET METAL SCREWS<br />
(LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE)
17.04<br />
<strong>SASH</strong> <strong>LOCK</strong><br />
9c 700 WEST BRIDGE STREET, OWATONNA, MN 55060 ■ 507.451.5620 800.866.7884 ■ TRUTH.COM
DOUBLE HUNG<br />
SLIDER 9900 <strong>SASH</strong> <strong>LOCK</strong> 10<br />
<strong>Truth</strong> <strong>Hardware</strong>’s “stealth” lock has its<br />
housing hidden inside the sash for the<br />
ultimate in low profile locking<br />
systems.<br />
• The fasteners are installed from<br />
the front face of the locks’ base<br />
and keeper, thereby eliminating<br />
everything except the handle from<br />
view.<br />
• Totally concealed locking<br />
mechanism helps protect moving<br />
parts from dust and dirt from<br />
accumulating.<br />
WARRANTY:<br />
Protected under the terms of the<br />
“<strong>Truth</strong> Warranty for Window & Door<br />
Manufacturers & Authorized<br />
Distributors”. Refer to <strong>Truth</strong>’s Terms<br />
& Conditions for further details.<br />
FINISH: Electrostatically applied,<br />
durable coatings that provide excellent<br />
resistance to chipping, scratching and<br />
corrosion while maintaining color<br />
stability for years in direct sunlight.<br />
Please refer to <strong>Truth</strong>’s Color Chart for<br />
examples of <strong>Truth</strong>’s most popular<br />
finish options. <strong>Truth</strong> also offers a<br />
wide range of decorative “plated”<br />
finishes – contact <strong>Truth</strong> for additional<br />
information on availability of these<br />
finishes on specific product lines.<br />
MATERIAL: High pressure,<br />
corrosion-resistant, die-cast zinc.<br />
RECOMMENDED SCREWS:<br />
Refer to drawings for complete<br />
information on screw type and quantity<br />
needed (sold separately).<br />
ORDERING INFORMATION:<br />
1. Order 9900 Series Sash Lock<br />
INCLUDE TRUTH SPECS ON<br />
YOUR NEXT WINDOW PROJECT<br />
Window check rail locks shall be<br />
included which will increase both<br />
security and weather seal tightness.<br />
The lock must provide easy operation<br />
and positive locked feel, while being<br />
low in profile to improve the windows<br />
appearance.<br />
Window check rail locks will be of<br />
internal cam design to provide<br />
optimum pull-in to aid in sealing the<br />
meeting rails. The lock and keeper<br />
shall be constructed of high pressure<br />
zinc alloy die castings.<br />
Window locks shall be 9900 Series<br />
Sash Lock as manufactured by <strong>Truth</strong><br />
<strong>Hardware</strong>.<br />
2. Select keeper style needed (order<br />
by item number)<br />
3. Specify finish choice.<br />
TRUTH TIPS:<br />
1. When two locks are used on one<br />
window, the placement of each lock,<br />
with respect to its keeper, becomes<br />
very critical to maintain a constant<br />
weatherseal on all sides of the window<br />
and to insure that each lock engages<br />
properly with its keeper.
9900<br />
<strong>SASH</strong> <strong>LOCK</strong><br />
10a
9900 <strong>SASH</strong> <strong>LOCK</strong> 10b
9900<br />
<strong>SASH</strong> <strong>LOCK</strong><br />
FIG. 5 9391 KEEPER<br />
2.800<br />
.320 [71.1 mm]<br />
[8.1 mm]<br />
RECOMMENDED SCREWS:<br />
(QTY 2) #6 PHILLIPS FLAT HEAD<br />
SCREWS (LENGTH AND THREAD TYPE<br />
TO BE DETERMINED BY PROFILE<br />
.185<br />
[4.7 mm]<br />
2.062<br />
[52.4 mm]<br />
.370<br />
[9.4 mm]<br />
AVAILABLE<br />
<strong>LOCK</strong>S<br />
A09900402<br />
A09900404<br />
A09900408<br />
FIG. 6 9703 KEEPER<br />
.320<br />
[8.1 mm]<br />
3.180<br />
[80.8 mm]<br />
RECOMMENDED SCREWS:<br />
(QTY 2) #6 PHILLIPS FLAT HEAD<br />
SCREWS (LENGTH AND THREAD TYPE<br />
TO BE DETERMINED BY PROFILE<br />
.556<br />
.185 [14.1 mm]<br />
[4.7 mm]<br />
2.062<br />
[52.4 mm]<br />
AVAILABLE<br />
<strong>LOCK</strong>S<br />
A09900402<br />
A09900404<br />
A09900408<br />
FIG. 7 9906 KEEPER<br />
.322<br />
[8.2 mm]<br />
2.750<br />
[69.8 mm]<br />
.185<br />
[4.7 mm]<br />
.370<br />
[9.4 mm]<br />
RECOMMENDED SCREWS:<br />
(QTY 2) #6 PHILLIPS FLAT HEAD<br />
SCREWS (LENGTH AND THREAD TYPE<br />
TO BE DETERMINED BY PROFILE<br />
5°<br />
2.052<br />
[52.1 mm]<br />
AVAILABLE<br />
<strong>LOCK</strong>S<br />
A09900402<br />
A09900404<br />
A09900408<br />
FIG. 8 43039 KEEPER<br />
2.749<br />
[69.8 mm]<br />
.155<br />
[3.9 mm]<br />
A09930402 <strong>LOCK</strong> ASSEMBLY<br />
RECOMMENDED SCREWS:<br />
(QTY 2) #6 SHEET METAL SCREWS<br />
PHILLIPS FLAT HEAD SCREWS<br />
(LENGTH AND THREAD TYPE<br />
TO BE DETERMINED BY PROFILE<br />
.396<br />
[10.1 mm]<br />
1.750<br />
[44.4 mm]<br />
.164<br />
[4.2 mm]<br />
1.249<br />
[31.7 mm]<br />
.080<br />
[2.0 mm]<br />
AVAILABLE<br />
<strong>LOCK</strong>S<br />
A09900402<br />
A09900404<br />
A09900408<br />
10c 700 WEST BRIDGE STREET, OWATONNA, MN 55060 n 507.451.5620 800.866.7884 n TRUTH.COM
DOUBLE HUNG<br />
SLIDER<br />
9950<br />
<strong>LOCK</strong> WITH<br />
CONCEALED KEEPER<br />
Engineered with a fresh new style and<br />
a streamline design that conceals the<br />
keeper under the housing, <strong>Truth</strong>’s 9950<br />
Series Lock and Keepers are a unique<br />
way to accent your window.<br />
WARRANTY: Protected under the<br />
terms of the “<strong>Truth</strong> Warranty for<br />
Window & Door Manufacturers &<br />
Authorized Distributors”. Refer to<br />
<strong>Truth</strong>’s Terms & Conditions for further<br />
details.<br />
MATERIAL: High-pressure,<br />
corrosion-resistant, die-cast zinc.<br />
FINISH: Electrostatically applied,<br />
durable coatings that provide excellent<br />
resistance to chipping, scratching and<br />
corrosion while maintaining color<br />
stability for years in direct sunlight.<br />
Please refer to <strong>Truth</strong>’s Color Chart for<br />
examples of <strong>Truth</strong>’s most popular finish<br />
options. Contact <strong>Truth</strong> for additional<br />
information on availability of these<br />
finishes on specific product lines.<br />
ORDERING INFORMATION:<br />
1. Choose the 9950 series lock required.<br />
See drawings for available options.<br />
2. Order the 9954 series keeper.<br />
3. Specify finish choice.<br />
RECOMMENDED SCREWS:<br />
Types of screws required determined<br />
by material of profile used. Refer to<br />
drawings for complete information on<br />
screw type and quantity needed (sold<br />
separately). For additional information<br />
on screw selection - see <strong>Truth</strong> Tips.<br />
TRUTH TIPS:<br />
1. When two locks are used on one<br />
window, the placement of each lock,<br />
with respect to its keeper, becomes<br />
very critical to maintain a constant<br />
weatherseal on all sides of the window<br />
and to insure that each lock engages<br />
properly with its keeper.<br />
2. For accurate hardware placement in<br />
vinyl or metal applications, pre-drilling<br />
of the window profile is recommended.<br />
3. For vinyl window applications,<br />
mounting screws should pass through<br />
two PVC walls, or one PVC wall and<br />
one insert wall. For this reason, it may<br />
be necessary to use a longer screw than<br />
is recommended.<br />
4. For metal window profiles, <strong>Truth</strong><br />
recommends stainless steel machine<br />
screws. However, in most applications,<br />
stainless steel sheet metal screws will<br />
provide adequate holding power.<br />
INCLUDE TRUTH SPECS ON<br />
YOUR NEXT WINDOW PROJECT<br />
Window check rail locks shall be<br />
included which will increase both<br />
security and weather seal tightness.<br />
The lock must provide easy operation<br />
and positive locked feel. The keeper<br />
should be concealed under the housing<br />
of the lock.<br />
Window check rail locks will be of<br />
internal cam design to provide optimum<br />
pull-in to aid in sealing the meeting<br />
rails. The lock and accompanying<br />
keeper will prevent mis-alignment<br />
during locking. The lock and keeper<br />
shall be constructed of high pressure<br />
zinc alloy die castings.<br />
Window locks shall be 9950 Series<br />
locks as manufactured by <strong>Truth</strong><br />
<strong>Hardware</strong>.<br />
11
9950<br />
<strong>LOCK</strong> WITH<br />
CONCEALED KEEPER<br />
FIG. 1 A09950400XX <strong>SASH</strong> <strong>LOCK</strong><br />
.640<br />
[16.3 mm]<br />
2.250<br />
[57.2 mm]<br />
1.656<br />
[42.1 mm]<br />
LOGO AREA<br />
LOGO AREA SHOWN<br />
FULL SCALE<br />
1.257<br />
[31.9 mm]<br />
LOGO AREA<br />
.432<br />
[11.0 mm]<br />
AVAILABLE<br />
LOGO<br />
AREA<br />
.674<br />
[17.1 mm]<br />
RECOMMENDED SCREW:<br />
(QTY 2) #6 PHILLIPS FLAT HEAD<br />
SCREW (LENGTH AND THREAD TYPE<br />
TO BE DETERMINED BY PROFILE)<br />
2.812<br />
[71.4 mm]<br />
FIG. 2 A09950401XX <strong>SASH</strong> <strong>LOCK</strong><br />
1.257<br />
[31.9 mm]<br />
.850<br />
[21.6 mm]<br />
2.250<br />
[57.2 mm]<br />
LOGO AREA<br />
1.656<br />
[42.1 mm]<br />
LOGO AREA<br />
LOGO AREA SHOWN<br />
FULL SCALE<br />
.432<br />
[11.0 mm]<br />
AVAILABLE<br />
LOGO<br />
AREA<br />
.674<br />
[17.1 mm]<br />
RECOMMENDED SCREW:<br />
(QTY 2) #6 PHILLIPS FLAT HEAD<br />
SCREW (LENGTH AND THREAD TYPE<br />
TO BE DETERMINED BY PROFILE)<br />
2.812<br />
[71.4 mm]<br />
FIG. 3 C09954XX CONCELED KEEPER<br />
2.250<br />
[57.2 mm]<br />
.280<br />
[7.1 mm]<br />
.140<br />
[3.6 mm]<br />
.340<br />
[8.6 mm]<br />
RECOMMENDED SCREW:<br />
(QTY 2) #6 SCREW WITH A #5 HEAD<br />
(LENGTH AND THREAD TYPE TO BE<br />
DETERMINED BY PROFILE)<br />
2.818<br />
[71.6 mm]<br />
11a<br />
700 WEST BRIDGE STREET, OWATONNA, MN 55060 ■ 507.451.5620 800.866.7884 ■ TRUTH.COM
DOUBLEHUNG<br />
SLIDER 30590 CAM GARD <strong>LOCK</strong> 12<br />
Stylish new design to the housing has<br />
made this lock a popular upgrade from<br />
those using the 7538 Series Sash Locks.<br />
As with its predecessor, the 30590 still<br />
has the following features which made<br />
it one of the industry’s best:<br />
• Streamlined low profile handle folds<br />
snugly against the housing producing<br />
a clean appearance, and helps to<br />
eliminate interference in shipping.<br />
• One-piece box construction spring<br />
provides a strong detent in handle<br />
movement, thus assuring the<br />
homeowner that the handle has<br />
completed its travel.<br />
• Available in either left- or right-hand,<br />
<strong>Truth</strong>’s Cam Gard Lock is built with<br />
a base plate to help improve its<br />
forced entry resistance (FER).<br />
• 30590 latches are designed to be<br />
compatible with specific keepers<br />
that will help produce the optimum<br />
engagement between lock and<br />
keeper.<br />
WARRANTY: Protected under the<br />
terms of the “<strong>Truth</strong> Warranty for<br />
Window & Door Manufacturers &<br />
Authorized Distributors”. Refer to<br />
<strong>Truth</strong>’s Terms & Conditions for further<br />
details.<br />
MATERIAL: High-pressure,<br />
corrosion-resistant, die-cast zinc.<br />
FINISH: Electrostatically applied,<br />
durable coatings that provide excellent<br />
resistance to chipping, scratching and<br />
corrosion while maintaining color<br />
stability for years in direct sunlight.<br />
Please refer to <strong>Truth</strong>’s Color Chart for<br />
examples of <strong>Truth</strong>’s most popular finish<br />
options. <strong>Truth</strong> also offers a wide range<br />
of decorative “plated” finishes –<br />
contact <strong>Truth</strong> for additional information<br />
on availability of these finishes on<br />
specific product lines.<br />
Types of screws required determined by<br />
material of profile used (sold<br />
separately). For additional information<br />
on screw selection - see <strong>Truth</strong> Tips.<br />
TRUTH TIPS:<br />
1. When two locks are used on one<br />
window, the placement of each lock,<br />
with respect to its keeper, becomes<br />
very critical to maintain a constant<br />
weatherseal on all sides of the window<br />
and to insure that each lock engages<br />
properly with its keeper.<br />
2. For accurate hardware placement in<br />
vinyl or metal applications, pre-drilling<br />
of the window profile is recommended.<br />
3. For vinyl window applications,<br />
mounting screws should pass through<br />
two PVC walls, or one PVC wall and<br />
one insert wall. For this reason, it may<br />
be necessary to use a longer screw than<br />
is recommended.<br />
4. For metal window profiles, <strong>Truth</strong><br />
recommends stainless steel machine<br />
screws. However, in most applications,<br />
stainless steel sheet metal screws will<br />
provide adequate holding power.<br />
INCLUDE TRUTH SPECS ON<br />
YOUR NEXT WINDOW PROJECT<br />
Window check rail locks shall be<br />
included which will increase both<br />
security and weather seal tightness.<br />
The lock must provide easy operation<br />
and a positive locked feel.<br />
The lock and keeper shall be constructed<br />
of high pressure zinc alloy die castings.<br />
Window locks shall be 30590 Cam<br />
Gard Series as manufactured by <strong>Truth</strong><br />
<strong>Hardware</strong>.<br />
ORDERING INFORMATION:<br />
1. Refer to the following drawing for<br />
item number information for the Cam<br />
Gard Lock you require. (Note: these<br />
locks are “handed”)<br />
2. Order the keeper style required.<br />
3. Specify finish choice.<br />
RECOMMENDED SCREWS:
30590<br />
CAM GARD <strong>LOCK</strong><br />
FIG. 1 A30590402 <strong>LOCK</strong><br />
2.250<br />
[57.2 mm]<br />
.780<br />
[19.8 mm]<br />
1.268<br />
[32.2 mm]<br />
RIGHT HAND<br />
LEFT HAND<br />
A30590402<br />
A30590403<br />
.280<br />
[7.1 mm]<br />
LEFT HAND SHOWN<br />
.650<br />
[16.5 mm]<br />
CAM PULL-IN .080<br />
RECOMMENDED SCREWS:<br />
(QTY 2) #6 PHILLIPS FLAT HEAD SCREWS<br />
(LENGTH AND THREAD TYPE TO BE DETERMINED<br />
BY PROFILE)<br />
3.250<br />
[82.6 mm]<br />
.480<br />
[12.2 mm]<br />
AVAILABLE<br />
KEEPERS<br />
C30628<br />
C30643<br />
A<br />
0.56<br />
0.617<br />
B<br />
0.04<br />
0.04<br />
C<br />
0.5<br />
FIG. 2 C30628.XX KEEPER<br />
2.240<br />
[56.9 mm]<br />
.260<br />
[6.6 mm]<br />
.130<br />
[3.3 mm]<br />
FIG. 3 C30643.XX KEEPER<br />
.375<br />
2.240 [9.5 mm]<br />
[56.9 mm]<br />
.188<br />
[4.8 mm]<br />
.530<br />
[13.5 mm]<br />
.530<br />
[13.5 mm]<br />
2.875<br />
[73.0 mm]<br />
AVAILABLE<br />
<strong>LOCK</strong>S<br />
2.875<br />
[73.0 mm]<br />
AVAILABLE<br />
<strong>LOCK</strong>S<br />
RECOMMENDED SCREWS:<br />
(QTY 2) #6 WITH A #5 HEAD<br />
PHILLIPS FLAT HEAD SCREW<br />
(LENGTH AND THREAD TYPE TO<br />
BE DETERMINED BY PROFILE)<br />
A30590402<br />
A30590403<br />
RECOMMENDED SCREWS:<br />
(QTY 2) #6 PHILLIPS FLAT HEAD<br />
SCREW (LENGTH AND THREAD TYPE<br />
TO BE DETERMINED BY PROFILE)<br />
A30590402<br />
A30590403<br />
12a<br />
700 WEST BRIDGE STREET, OWATONNA, MN 55060 n 507.451.5620 800.866.7884 n TRUTH.COM
DOUBLE HUNG<br />
SLIDER 17 RESTORATION HARDWARE 13<br />
When the window’s design or the<br />
home’s décor calls for that traditional<br />
touch, <strong>Truth</strong>’s Restoration <strong>Hardware</strong> is<br />
the answer. Designed and crafted to<br />
replicate the styling of window<br />
hardware from an earlier era, <strong>Truth</strong> has<br />
used today’s technology to create a<br />
hardware system that is both stylish<br />
and functional.<br />
APPLICATION AND DESIGN:<br />
<strong>Truth</strong>’s Restoration Lock comes<br />
equipped with the traditional open cam<br />
look, and is fitted with a durable plastic<br />
insert on the keeper to protect the<br />
surface of the cam during lock-up and<br />
to aid in its smooth operation. This<br />
open cam design also provides for a<br />
simple visual indicator that the system<br />
is locked.<br />
The traditional styling of the thumb<br />
lever on the lock is ergonomically<br />
simple to operate. The spring back<br />
design snaps the cam into the lock or<br />
un-locked position which reduces the<br />
potential for accidental marring of<br />
grilles.<br />
With a lower profile than many other<br />
lock and keeper configurations, <strong>Truth</strong>’s<br />
Restoration Lock system helps to<br />
minimize sight line interference.<br />
Utilizing standard mounting holes (2-<br />
1/16") and setback (11/16") this lock<br />
and keeper are an easy retrofit to<br />
existing lock applications thereby<br />
reducing any additional manufacturing<br />
set-ups.<br />
<strong>Truth</strong> also offers a Restoration Sash<br />
Lift which has a traditional finger-pull<br />
look, and encourages the lifting of the<br />
window from bottom thereby putting<br />
less stress on the sash than would<br />
occur from pushing on the top rail.<br />
See <strong>Truth</strong>’s Sash Lift section for<br />
further technical information.<br />
WARRANTY: Protected under the<br />
terms of the <strong>Truth</strong> Warranty for Window<br />
& Door Manufacturers & Authorized<br />
Distributors. Refer to <strong>Truth</strong>’s Terms<br />
& Conditions for further details.<br />
MATERIAL: High-pressure,<br />
corrosion-resistant die-cast zinc.<br />
Molded plastic insert.<br />
FINISH: Electrostatically applied,<br />
durable coatings that provide excellent<br />
resistance to chipping, scratching and<br />
corrosion while maintaining color<br />
stability for years in direct sunlight.<br />
Please refer to <strong>Truth</strong>’s Color Chart for<br />
examples of <strong>Truth</strong>’s most popular<br />
finish options. <strong>Truth</strong> also offers a<br />
wide range of decorative “plated”<br />
finishes – contact <strong>Truth</strong> for additional<br />
information on availability of these<br />
finishes on specific product lines.<br />
ORDERING INFORMATION:<br />
1. Order item #17.02 Restoration Lock.<br />
2. Order item #12594.XX Restoration<br />
Keeper<br />
3. Order item #18.16 Restoration Lift<br />
4. Specify finish<br />
5. Select screws (fasteners). Sold<br />
separately.<br />
RECOMMENDED SCREWS:<br />
Phillips flat head screws. Refer to<br />
drawings for additional specs. Length<br />
and thread type to be determined by<br />
profile. For further information on<br />
screw selection – see <strong>Truth</strong> Tips<br />
TRUTH TIPS:<br />
1. When two locks are used on one<br />
window, the placement of each lock,<br />
with respect to its keeper becomes very<br />
critical to maintain a constant weather<br />
seal on all sides of the window and to<br />
insure that each lock engages properly<br />
with its keeper.<br />
2. For accurate hardware placement in<br />
vinyl or metal applications, pre-drilling<br />
of the window profile is recommended.<br />
3. For vinyl window applications,<br />
mounting screws should pass through<br />
two PVC walls, or one PVC wall and<br />
one insert wall. For this reason, it may<br />
be necessary to use a longer screw than<br />
is recommended.<br />
INCLUDE TRUTH SPECS ON<br />
YOUR NEXT WINDOW PROJECT<br />
Window check rail locks shall be<br />
included which increase both security<br />
and weather seal tightness. The lock<br />
must provide easy operation and<br />
positive locked feel (detent). Window<br />
check rail locks shall be of open cam<br />
design.<br />
Locks will be of #17 Series design as<br />
manufactured by <strong>Truth</strong> <strong>Hardware</strong>.
17<br />
RESTORATION HARDWARE<br />
FIG. 11 RESTORATION <strong>LOCK</strong> APPLICATION <strong>LOCK</strong> APPLICATION<br />
.03<br />
0.76<br />
<strong>LOCK</strong>ED<br />
POSITION<br />
GLASS<br />
GLASS<br />
FIG. 2 17.02 RESTORATION <strong>LOCK</strong> APPLICATION <strong>LOCK</strong> APPLICATION<br />
2.720<br />
69.1<br />
.688<br />
17.5<br />
.761<br />
19.3<br />
2.062<br />
52.4<br />
.270<br />
6.9<br />
1.472<br />
37.4<br />
RECOMMENDED SCREWS:<br />
(QTY 2) #6 PHILLIPS FLAT HEAD SCREWS<br />
(LENGTH AND TYPE TO BE DETERMINED BY<br />
PROFILE)<br />
.550<br />
14.0<br />
1.156<br />
29.4<br />
FIG. 3 12594 KEEPER KEEPER<br />
2.062<br />
52.4<br />
.156<br />
4.0<br />
.329<br />
8.4<br />
RECOMMENDED SCREWS:<br />
(QTY 2) #6 PHILLIPS FLAT HEAD SCREWS<br />
(LENGTH AND TYPE TO BE DETERMINED BY<br />
PROFILE)<br />
2.720<br />
69.1<br />
.675<br />
17.1<br />
.387<br />
9.8<br />
13a<br />
700 WEST BRIDGE STREET, OWATONNA, MN 55060 ■ 507.451.5620 800.866.7884 ■ TRUTH.COM
DOUBLE HUNG<br />
SLIDER<br />
19<br />
POSITIVE ACTION <strong>LOCK</strong><br />
(PAL SYSTEM)<br />
<strong>Truth</strong> <strong>Hardware</strong>’s Positive Action Lock<br />
(PAL) Systems are some of the most<br />
versatile and easy to operate locking<br />
systems in the marketplace today.<br />
Available in the original Push Button<br />
design and new Slide Tab designs, these<br />
lock systems are simple to operate and<br />
provide added security for both vinyl or<br />
wood windows.<br />
A simple movement of the locking tab<br />
or push of the button disengages the<br />
lock allowing the sash to move freely.<br />
When the window is closed the PAL<br />
System automatically locks, securing the<br />
window without having to manipulate<br />
the lock again.<br />
Certain models can be used with or<br />
without a keeper depending on the<br />
window’s design. Window profiles that<br />
incorporate a notch in the meeting rail<br />
may not require a keeper to secure the<br />
window in the locked position resulting<br />
in decreased inventory costs to the<br />
manufacturer and infinite side-to-side<br />
forgiveness in the locks’ application.<br />
FEATURES & BENEFITS:<br />
Snap-on Cover: Available in the<br />
19.62/63 slide tab designs, this feature<br />
allows for more aesthetic cover<br />
possibilities thus reducing material costs<br />
and allowing it to fit more applications.<br />
Easy Operation: Comfortable finger<br />
pull (slide tab design) provides positive<br />
feedback that the lock is fully retracted<br />
(slight “snap” felt). Text is located<br />
under the pull on the lock to indicated<br />
an un-locked condition when the lock<br />
bolt is retracted. This provides at-aglance<br />
feedback to the homeowner that<br />
the lock is in the unlocked state.<br />
Multiple Mounting Options: Slide Tab<br />
design can be mounted with screw<br />
fasteners in both the vertical (recessed or<br />
top mount) and horizontal (recessed<br />
only) orientations and may be fitted into<br />
<strong>Truth</strong>’s standard 9369 Series Recessed<br />
Lock cut-out (call <strong>Truth</strong> for info).<br />
Visual Security: The <strong>Truth</strong> lock bolt on<br />
the PAL System will stay retracted when<br />
opening the sash and remain retracted<br />
until triggered in a positively locked<br />
position. Competitive locks tend to<br />
trigger when opening the sash, thus<br />
providing a false locked position. This<br />
unique feature helps users of the PAL<br />
System to prevent accidental marring of<br />
their window as the lock slides past<br />
decorative grilles.<br />
Multiple Keeper configurations:<br />
Including top-mount, and face mount<br />
keepers. Custom keepers also available<br />
to meet customer specific application<br />
needs.<br />
LOGO OPTIONS:<br />
For that “personalized touch,” <strong>Truth</strong><br />
<strong>Hardware</strong>’s Positive Action Locks are<br />
capable of accepting your company’s<br />
name or logo with <strong>Truth</strong>’s pad printing<br />
process. This logo reproduction process<br />
is an attractive way of highlighting your<br />
company signature.<br />
WARRANTY:<br />
Protected under the terms of the <strong>Truth</strong><br />
Warranty for Window & Door<br />
Manufacturers and Authorized<br />
Distributors. Refer to <strong>Truth</strong>’s Terms &<br />
Conditions for further details.<br />
MATERIAL:<br />
High pressure, corrosion resistant, diecast<br />
zinc with a high strength acetal bolt.<br />
Slide Tab version constructed of high<br />
quality molded plastic cover over die cast<br />
base.<br />
FINISH:<br />
Electrostatically applied, durable coatings<br />
that provide excellent resistance to<br />
chipping, scratching and corrosion while<br />
maintaining color stability for years in<br />
direct sunlight. Please refer to <strong>Truth</strong>’s<br />
color chart for examples of <strong>Truth</strong>’s most<br />
popular finish options. <strong>Truth</strong> also offers<br />
a wide range of decorative “plated”<br />
finishes – contact <strong>Truth</strong> for additional<br />
information on availability of these<br />
finishes on specific product lines.<br />
ORDERING INFORMATION:<br />
1. Order PAL System style (specify by<br />
part number)<br />
• #19.62.00.002 Slide Tab PAL – Hook<br />
Version w/screw hole spread 1.812 and<br />
1.312<br />
• #19.63.00.001 Slide Tab PAL – Hook<br />
Version w/screw hole spread 2.062<br />
2. Order covers for 19.62/63 Slide Tab<br />
Versions separately<br />
#13663.XX Cover (19.62 model)<br />
#13885.XX Cover (19.63 model)<br />
3. Specify finish number.<br />
4. Select screws (fasteners). Sold<br />
separately.<br />
RECOMMENDED SCREWS:<br />
2 - #7 Phillips Flat Head Screws. Refer<br />
to drawings for additional specs. Length<br />
and thread type to be determined by<br />
profile. For further information on screw<br />
selection – see <strong>Truth</strong> Tips.<br />
19.60 Series<br />
19.63 Series<br />
19.62 Series<br />
TRUTH TIPS:<br />
1. For accurate hardware placement in<br />
vinyl applications, pre-drilling of the<br />
window profile is strongly<br />
recommended.<br />
2. To help locate mounting position,<br />
<strong>Truth</strong> recommends a “locating groove”<br />
in the profile. The “dimpled” version of<br />
the PAL System used on profiles with a<br />
groove will also help keep lock in<br />
position during application process.<br />
3. For vinyl window applications,<br />
mounting screws should pass through<br />
two PVC walls, or one PVC wall and<br />
one insert wall. For this reason, it may<br />
be necessary to use a longer screw than<br />
is recommended.<br />
4. For top mounted keeper<br />
configurations a 0.3” minimum deep<br />
surface is needed on the fixed rail with<br />
both surfaces flush when closed.<br />
INCLUDE TRUTH SPECS ON<br />
YOUR NEXT WINDOW PROJECT<br />
Window check rail locks shall be<br />
included which will increase both<br />
security and weather seal tightness. The<br />
lock must provide easy operation and<br />
positively locks upon closure.<br />
Window lock will be of quick snap<br />
action swing bolt design providing<br />
maximum forgiveness for sash<br />
alignment. The product will be<br />
constructed of high pressure zinc alloy<br />
die cast with high strength acetal bolt.<br />
Window lock shall have automatic<br />
latching to allow user to use both hands<br />
to move the sash. Window will be<br />
unlocked by pressing a push lever, or<br />
sliding tab.<br />
Window locks will be 19 series Positive<br />
Action Locks as manufactured by <strong>Truth</strong><br />
<strong>Hardware</strong>, Owatonna, Minnesota.<br />
14
19<br />
POSITIVE ACTION <strong>LOCK</strong><br />
(PAL SYSTEM)<br />
FIG. 1 APPLICATION OF 19.64 POSITIVE ACTION <strong>LOCK</strong> (PAL) SYSTEM<br />
1 .681<br />
[17.3 mm]<br />
.581<br />
[14.7 mm]<br />
<strong>LOCK</strong>ED<br />
POSITION<br />
SHOWN<br />
HARDWARE SHOWN<br />
19.64 P.A.L.<br />
.350 MIN<br />
[8.9 mm]<br />
.220 MAX<br />
[5.6 mm]<br />
.190 MIN<br />
[4.8 mm]<br />
2.870<br />
[72.9 mm]<br />
.451<br />
[11.5 mm]<br />
2.250<br />
[57.2 mm]<br />
.524<br />
[13.3 mm]<br />
1.240<br />
[31.5 mm]<br />
<strong>LOCK</strong>ED<br />
1.625<br />
[41.3 mm]<br />
UN<strong>LOCK</strong>ED<br />
RECOMMENDED SCREWS:<br />
WOOD: *7 PHILLIPS FLAT HEAD SHEET METAL SCREWS<br />
(LENGTH TO BE DETERMINED BY PROFILE)<br />
PVC/METAL: #7 PHILLIPS FLAT HEAD SCREWS,(LENGTH AND<br />
THREAD TYPE TO BE DETERMINED BY PROFILE)<br />
1<br />
DIMENSION MUST BE MAINTAINED FOR PROPER <strong>LOCK</strong> OPERATION<br />
**FOR ACCURATE HARDWARE PLACEMENT PRE-DRILLING IS STRONGLY RECOMMENDED<br />
14a
19<br />
POSITIVE ACTION <strong>LOCK</strong><br />
(PAL SYSTEM)<br />
FIG. 2 APPLICATION OF 19.62 POSITIVE ACTION <strong>LOCK</strong> (PAL) SYSTEM<br />
1.375<br />
[34.9 mm]<br />
<strong>LOCK</strong>ED<br />
2.302<br />
[58.5 mm]<br />
<strong>LOCK</strong>ED POSITION<br />
SHOWN<br />
.457<br />
[11.6 mm]<br />
.688<br />
[17.5 mm]<br />
2.302<br />
[58.5 mm]<br />
HARDWARE SHOWN<br />
19.62 P.A.L.<br />
45579.XX<br />
KEEPER<br />
13663.XX<br />
COVER<br />
.611<br />
[15.5 mm]<br />
.861<br />
[21.9 mm]<br />
FOR ADDITIONAL KEEPER<br />
OPTIONS CONTACT TRUTH<br />
( 1.312 )<br />
[33.3 mm]<br />
RECOMMENDED SCREWS:<br />
WOOD: #7 PHILLIPS FLAT HEAD SHEET METAL SCREWS<br />
(LENGTH TO BE DETERMINED BY PROFILE)<br />
( 1.812 )<br />
[46.0 mm]<br />
PVC/METAL: #7 PHILLIPS FLAT HEAD SCREWS (LENGTH AND THREAD<br />
TYPE TO BE DETERMINED BY PROFILE)<br />
14b
19<br />
POSITIVE ACTION <strong>LOCK</strong><br />
(PAL SYSTEM)<br />
FIG. 3 APPLICATION OF 19.63 POSITIVE ACTION <strong>LOCK</strong> (PAL) SYSTEM<br />
2.813<br />
[71.4 mm]<br />
2.062<br />
[52.4 mm]<br />
1.304<br />
[33.1 mm]<br />
.935<br />
[23.7 mm]<br />
<strong>LOCK</strong>ED<br />
<strong>LOCK</strong>ED POSITION<br />
SHOWN<br />
.738<br />
[18.7 mm]<br />
.444<br />
[11.3 mm]<br />
2.813<br />
[71.4 mm]<br />
HARDWARE SHOWN<br />
19.63 P.A.L.<br />
45639.XX<br />
13885.XX<br />
KEEPER<br />
COVER<br />
FOR ADDITIONAL KEEPER<br />
OPTIONS CONTACT TRUTH<br />
.690<br />
[17.5 mm]<br />
.940<br />
[23.9 mm]<br />
2.062<br />
[52.4 mm]<br />
RECOMMENDED SCREWS:<br />
WOOD: #6 PHILLIPS FLAT HEAD SHEET METAL SCREWS (LENGTH AND THREAD<br />
TYPE TO BE DETERMINED BY PROFILE<br />
14c<br />
PVC/METAL: #6 PHILLIPS FLAT HEAD SCREWS, (LENGTH AND THREAD<br />
TYPE TO BE DETERMINED BY PROFILE)
19<br />
POSITIVE ACTION <strong>LOCK</strong><br />
(PAL SYSTEM)<br />
FIG. 4 45579.XX KEEPER<br />
2.062<br />
[52.39 mm]<br />
.141<br />
[3.6 mm]<br />
.282<br />
[7.2 mm]<br />
.405<br />
[10.3 mm]<br />
2.500<br />
[63.5 mm]<br />
AVAILABLE<br />
<strong>LOCK</strong><br />
19.62 PAL<br />
19.63 PAL<br />
RECOMMENDED SCREWS:<br />
WOOD: #7 PHILLIPS FLAT HEAD SHEET METAL SCREWS<br />
(LENGTH TO BE DETERMINED BY PROFILE)<br />
PVC/METAL: #7 PHILLIPS FLAT HEAD SCREWS (LENTGH AND THREAD<br />
TYPE TO BE DETERMINED BY PROFILE)<br />
14d
19<br />
POSITIVE ACTION <strong>LOCK</strong><br />
(PAL SYSTEM)<br />
FIG. 5 45639.XX KEEPER<br />
.230<br />
[5.8 mm]<br />
1.020<br />
[25.9 mm]<br />
.340<br />
[8.6 mm]<br />
.125<br />
[3.2 mm]<br />
.288<br />
[7.3 mm]<br />
.095<br />
[2.4 mm]<br />
1.000<br />
[25.4 mm]<br />
1.700<br />
[43.2 mm]<br />
AVAILABLE<br />
<strong>LOCK</strong><br />
19.62 PAL<br />
19.63 PAL<br />
RECOMMENDED SCREWS:<br />
WOOD: #7 PHILLIPS FLAT HEAD SHEET METAL SCREWS<br />
(LENGTH TO BE DETERMINED BY PROFILE)<br />
PVC/METAL: #7 PHILLIPS FLAT HEAD SCREWS (LENGTH<br />
AND THREAD TYPE TO BE DETERMINED BY PROFILE)<br />
14e
19<br />
POSITIVE ACTION <strong>LOCK</strong><br />
(PAL SYSTEM)<br />
FIG. 6 APPLICATION OF 19.60 POSITIVE ACTION <strong>LOCK</strong> (PAL) SYSTEM<br />
.896<br />
.836<br />
22.769 mm<br />
21.245 mm<br />
2.062<br />
[52.4 mm]<br />
.338<br />
[8.6 mm]<br />
LOGO AREA<br />
1.145<br />
[29.1 mm]<br />
UN<strong>LOCK</strong>ED<br />
.090<br />
.030<br />
1<br />
2.277 mm<br />
.753 mm<br />
<strong>LOCK</strong>ED POSITION<br />
SHOWN<br />
1.568<br />
[39.8 mm]<br />
<strong>LOCK</strong>ED<br />
LOGO AREA<br />
2.950<br />
[74.9 mm]<br />
.665<br />
[16.9 mm]<br />
.110<br />
.045<br />
1<br />
MAX.<br />
MIN.<br />
2.785 mm<br />
1.134 mm<br />
.605<br />
[15.4 mm]<br />
.390<br />
[9.9 mm]<br />
**<br />
PAL SYSTEM USED<br />
WITH OUT KEEPER<br />
.459 MIN<br />
[11.7 mm]<br />
PAL SYSTEM USED<br />
WITH KEEPER<br />
HARDWARE SHOWN<br />
19.60 P.A.L.<br />
41235.XX KEEPER<br />
FOR ADDITIONAL KEEPER<br />
OPTIONS CONTACT TRUTH<br />
RECOMMENDED SCREWS:<br />
WOOD: (P/N 19160.XX) #7 X 1 1/2 PHILLIPS FLAT HEAD SHEET METAL SCREWS.<br />
PVC/METAL: #7 PHILLIPS FLAT HEAD SCREWS, (LENGTH AND THREAD<br />
TYPE TO BE DETERMINED BY PROFILE)<br />
1<br />
DIMENSIONS MUST BE MAINTAINED FOR PROPER <strong>LOCK</strong> OPERATION<br />
** FOR ACCURATE HARDWARE PLACEMENT PRE-DRILLING IS STRONGLY RECOMMENDED<br />
14f
19<br />
POSITIVE ACTION <strong>LOCK</strong><br />
(PAL SYSTEM)<br />
FIG. 7 41235 KEEPER<br />
2.062<br />
[52.4 mm]<br />
.168<br />
[4.3 mm]<br />
.338<br />
[8.6 mm]<br />
.665<br />
[16.9 mm]<br />
AVAILABLE<br />
<strong>LOCK</strong><br />
19.60 PAL<br />
RECOMMENDED SCREWS:<br />
2.950<br />
[74.9 mm]<br />
HARDWARE SHOWN<br />
41235.XX KEEPER<br />
WOOD: (QTY 2) (P/N 19160.XX) #7 X 1 1/2 PHILLIPS<br />
FLAT HEAD SHEET METAL SCREWS<br />
PVC/METAL: #7 PHILLIPS FLAT HEAD SCREWS,<br />
(LENGTH AND THREAD TYPE TO BE<br />
DETERMINED BY PROFILE)<br />
FIG. 8 32780 KEEPER<br />
2.187<br />
[55.6 mm]<br />
.125<br />
[3.2 mm]<br />
.665<br />
[16.9 mm]<br />
.381<br />
[9.7 mm]<br />
RECOMMENDED SCREWS:<br />
(QTY 2) #6 SHEET METAL SCREWS<br />
PHIILIPS FLAT HEAD SCREWS.<br />
(LENGTH AND THREAD TYPE TO<br />
BE DETERMINED BY PROFILE)<br />
FIG. 9 41320 KEEPER<br />
RECOMMENDED SCREWS:<br />
.444<br />
[11.3 mm]<br />
2.950<br />
[74.9 mm]<br />
2.062<br />
[52.4 mm]<br />
.168<br />
[4.3 mm]<br />
.250<br />
[6.4 mm]<br />
.665<br />
[16.9 mm]<br />
(QTY 2) #6 SHEET METAL SCREWS<br />
PHIILIPS FLAT HEAD SCREWS.<br />
(LENGTH AND THREAD TYPE TO<br />
BE DETERMINED BY PROFILE)<br />
2.950<br />
[74.9 mm]<br />
.338<br />
[8.6 mm]<br />
700 WEST BRIDGE STREET, OWATONNA, MN 55060 ■ 507.451.5620 800.866.7884 ■ TRUTH.COM<br />
14g
DOUBLE HUNG<br />
SLIDER<br />
19 FuSION SYSTEM 15<br />
Appropriately named the Fusion<br />
System, <strong>Truth</strong> <strong>Hardware</strong> has successfully<br />
merged two separate pieces of window<br />
hardware into one completely<br />
revolutionary system. <strong>Truth</strong> has<br />
designed a system where the tilt latches<br />
are hidden beneath the check rail and are<br />
actuated by the same lever as the lock.<br />
With just one hand, the homeowner<br />
can unlock the window and release the<br />
tilt latches. The Fusion system is<br />
loaded with features at a very affordable<br />
price.<br />
TRuTH’S FuSION IS ALL AbOuT<br />
vERSATILITY<br />
The Fusion System is designed to give<br />
you choices. First, both tilt latches are<br />
actuated by a single lock/tilt latch<br />
mechanism. This mechanism can be<br />
located anywhere on the check rail, so if<br />
you prefer to use more than one lock on<br />
the rail, you have the option of adding a<br />
matching sash lock.<br />
With the Fusion system you won’t have<br />
to stock complete locks in all your<br />
different color offerings. There is a<br />
standard base assembly that screws into<br />
your check rail. Using <strong>Truth</strong>’s patented<br />
technology, the stylish housing and<br />
lever assembly securely attaches to the<br />
base allowing you to efficiently manage<br />
your inventory. This “fastenerless” cover<br />
design gives the window a cleaner<br />
appearance than other checkrail options<br />
and also allows for easy removal of the<br />
hardware to make it more convenient to<br />
paint or stain the window following its<br />
installation.<br />
Perhaps the most impressive feature of<br />
this system is that it can be used on<br />
any-sized window because you cut the<br />
connecting strap to its appropriate<br />
length after the hardware is installed in<br />
the window. What could be easier?<br />
FEATuRES & bENEFITS:<br />
• Available with trigger actuated latches<br />
- prevents marring wood when windows<br />
are tilted back in. Latches without<br />
triggers used primarily in vinyl window<br />
applications, are also available.<br />
• Lock and tilt latch release are actuated<br />
by one mechanism - allows you the<br />
option of using either single or multiple<br />
locks on the window.<br />
• Pick-resistant base plate increases<br />
security.<br />
Tilt Latches (Vinyl Application)<br />
• Latches are hidden into the checkrail -<br />
Lets your customer see more of the<br />
beauty of your window, rather than the<br />
hardware.<br />
• Totally adjustable to any size window -<br />
You cut the connecting strap to the<br />
desired length after hardware is installed<br />
in the window.<br />
• Non-handed latches - Less inventory<br />
costs and less hassle on the production<br />
line.<br />
• Housing assembly is separate from<br />
base - Increases inventory efficiencies by<br />
only having to inventory the housing in<br />
different colors or finishes - not the<br />
entire locking system.<br />
• Stylish fastenerless housing - Makes it<br />
easy to remove for staining or finishing.<br />
• Easy, intuitive one-handed operation.<br />
• Corrosion Resistant - Composite<br />
construction provides a corrosion<br />
resistant system.<br />
LOGO OPTIONS:<br />
You can personalize the Fusion Lock<br />
with your logo. <strong>Truth</strong>’s pad printing<br />
Fusion System (locked)<br />
Tilt Latches (Wood Application)<br />
process is a great way to highlight your<br />
company’s identity.<br />
WARRANTY:<br />
Protected under the terms of the <strong>Truth</strong><br />
Warranty for Window & Door<br />
Manufacturers and Authorized<br />
Distributors. Refer to <strong>Truth</strong>’s Terms<br />
& Conditions for further details.<br />
MATERIAL:<br />
Housing assembly is powder coated<br />
diecast zinc. The lock base and latch<br />
assemblies are of a composite<br />
construction consisting of engineered<br />
plastics, zinc and stainless steel. The<br />
latch assembly and lock assembly are tied<br />
together by a corrosion resistant strap.<br />
FINISH:<br />
Electrostatically applied, durable coatings<br />
that provide excellent resistance to<br />
chipping, scratching and corrosion while<br />
maintaining color stability for years in<br />
direct sunlight. Please refer to <strong>Truth</strong>’s<br />
color chart for examples of <strong>Truth</strong>’s most
19<br />
FuSION SYSTEM<br />
popular finish options. <strong>Truth</strong> also offers<br />
a wide range of decorative “plated”<br />
finishes - contact <strong>Truth</strong> for additional<br />
information on availability of these<br />
finishes on specific product lines.<br />
ORDERING INFORMATION:<br />
Order the Fusion System by individual<br />
components:<br />
#19.70.XX.100 - Housing/Lever<br />
Assembly<br />
#19.71.00.100 - Lock Base<br />
• Wood Window Application<br />
• #12617 - Latch with trigger<br />
• #12743 - Latch without trigger<br />
• Vinyl Window Application<br />
• #12744 - Bolt location "A"<br />
• #12745 - Bolt location "C"<br />
Note: Latches with variable trigger<br />
lengths available. Contact <strong>Truth</strong> for<br />
additional information.<br />
Latches (2 required)<br />
#22196 - Strap (24,000 foot roll)<br />
#41333.XX - Keeper, or<br />
#42059.XX - Keeper<br />
OPTIONAL:<br />
#19.73.XX.100 - Secondary<br />
Housing/Lever Assembly<br />
#19.72.00.100 - Secondary Lock Base<br />
Required Tools for connecting the strap<br />
(Not included):<br />
Two 1/16" Allen Wrenches<br />
RECOMMENDED SCREWS:<br />
Base: 2 - #8 Pan head screws<br />
Keeper: 2 - #8 Flat head screws<br />
Latches: 2 -#6 Flat head<br />
Types of screws required determined<br />
by material of profile used. Refer to<br />
drawings for complete information on<br />
screw type and quantity needed (sold<br />
separately). For additional information<br />
on screw selection - see <strong>Truth</strong> Tips.<br />
TRuTH TIPS:<br />
1. When two locks are used on one<br />
window, the placement of each lock,<br />
with respect to its keeper, becomes very<br />
critical to maintain a constant weather<br />
seal on all sides of the window and to<br />
insure that each lock engages properly<br />
with its keeper.<br />
2. For vinyl window applications,<br />
mounting screws should pass through<br />
two PVC walls, or one PVC wall and<br />
one insert wall<br />
INCLuDE TRuTH SPECS ON<br />
YOuR NEXT WINDOW PROJECT<br />
Recess mounted check rail lock whose<br />
lever activates the enclosed tilt latches<br />
shall be included which will increase<br />
security and weather seal tightness.<br />
The lock must provide easy operation<br />
and provide a pick resistant base plate<br />
which protects the cam thus providing<br />
increased security.<br />
Window check rail locks will be of<br />
internal cam design to provide optimum<br />
pull-in to aid in sealing the meeting<br />
rails.<br />
Window locks and tilt latches will be<br />
19 Series Fusion System as<br />
manufactured by <strong>Truth</strong> <strong>Hardware</strong>.<br />
15a
19 FuSION SYSTEM 15b<br />
F<br />
FIG. 1 FUSION SNAP <strong>LOCK</strong> FOR WOOD AND VINYL APPLICATIONS<br />
3.044<br />
[77.3 mm]<br />
1.522<br />
[38.7 mm]<br />
1.334<br />
[33.9 mm]<br />
.312<br />
[7.9 mm]<br />
.320<br />
[8.1 mm]<br />
1.699<br />
[43.2 mm]<br />
.571<br />
[14.5 mm]<br />
[<br />
.385<br />
[9.8 mm]<br />
FIG. 71.00.100 2 19.71.00.100 BASE FOR BASE WOOD FOR AND WOOD VINYL AND APPLICATIONS<br />
VINYL APPLICATIONS<br />
F<br />
2X R.600<br />
[15.2 mm]<br />
1.241<br />
[31.5 mm]<br />
2.108<br />
[53.5 mm]<br />
2X .490<br />
[12.4 mm]<br />
.461<br />
[11.7 mm]<br />
2.854<br />
[72.5 mm]<br />
.312<br />
[7.9 mm]<br />
[<br />
[<br />
.530<br />
[13.5 mm]<br />
RECOMMENDED SCREWS:<br />
(QTY 2)#8 PAN HEAD SCREWS (LENGTH AND THREAD TYPE<br />
DETERMINED BY PROFILE)<br />
DETERM
19<br />
FuSION SYSTEM<br />
FIG. 3 FUSION <strong>LOCK</strong> ASSEMBLY FOR WOOD APPLICATION<br />
EXTERIOR VIEW<br />
INTERIOR VIEW<br />
COVER ASSEMBLY<br />
19.70.XX.100<br />
STRAP<br />
22196<br />
BASE ASSEMBLY<br />
19.71.00.100<br />
LATCH<br />
12617<br />
STRAP GUIDE<br />
(INCLUDED WITH<br />
BASE 19.71.00.100)<br />
LATCH<br />
12617<br />
15c
19 FuSION SYSTEM 15d<br />
FIG. 4 FUSION KEEPER ASSEMBLY FOR WOOD APPLICATION<br />
KEEPER<br />
41333.XX
19<br />
FuSION SYSTEM<br />
F<br />
FIG. 5 FUSION <strong>LOCK</strong> APPLICATION FOR WOOD APPLICATIONS<br />
2X R.250<br />
[6.4 mm]<br />
2.857<br />
[72.6 mm]<br />
.325<br />
[8.3 mm]<br />
1.250<br />
[31.8 mm]<br />
.334<br />
[8.5 mm]<br />
1.152<br />
[29.3 mm]<br />
2.867<br />
[72.8 mm]<br />
R.625<br />
[15.9 mm]<br />
FULL R<br />
[19.0 mm]<br />
.750<br />
A<br />
A<br />
.425<br />
[10.8 mm]<br />
2X 3.125<br />
.935 [79.4 mm]<br />
[23.7 mm]<br />
2X .188<br />
[4.8 mm]<br />
SECTION A-A<br />
CUSTOMER DEPENDANT<br />
4X R.312<br />
[7.9 mm]<br />
.574<br />
[14.6 mm]<br />
.550<br />
[14.0 mm]<br />
.045<br />
[1.1 mm]<br />
CUSTOMER DEPENDANT<br />
.184<br />
[4.7 mm]<br />
1.148<br />
[29.2 mm]<br />
15e<br />
.679<br />
[17.2 mm]<br />
Ø.625<br />
[15.9 mm]<br />
.092<br />
.472 [2.3 mm]<br />
[12.0 mm]<br />
.944<br />
[24.0 mm]<br />
BOTH SIDES
19 FuSION SYSTEM 15f<br />
FIG. 6 FUSION LATCH 12617 (FOR WOOD APPLICATIONS)<br />
2.345<br />
[59.6 mm]<br />
.188<br />
[4.8 mm]<br />
1.135<br />
[28.8 mm]<br />
.466<br />
[11.8 mm]<br />
.930<br />
[23.6 mm]<br />
.562<br />
[14.3 mm]<br />
Ø.610<br />
[15.5 mm]<br />
.306<br />
[7.8 mm]<br />
.382<br />
[9.7 mm]<br />
2.915<br />
[74.0 mm]<br />
RECOMMENDED SCREWS:<br />
.092<br />
[2.3 mm]<br />
(QTY 2)#4,#5,or #6 PHILLIPS FLAT HEAD SCREWS<br />
(LENGTH AND THREAD TYPE TO<br />
BE DETERMINED BY PROFILE)<br />
.154<br />
[3.9 mm]<br />
FIG. 7 KEEPER 41333 (FOR WOOD APPLICATIONS)<br />
FIG. 7 KEEPER 41333 (FOR WOOD APPLICATIONS)<br />
.952<br />
[24.2 mm]<br />
FOR OTHER<br />
LENGTHS<br />
CONTACT<br />
TRUTH<br />
.077<br />
[2.0 mm]<br />
4X R.312<br />
[7.9 mm]<br />
.280<br />
[7.1 mm]<br />
.375<br />
[9.5 mm]<br />
.560<br />
[14.2 mm]<br />
.750<br />
[19.0 mm]<br />
.500<br />
[12.7 mm]<br />
3.044<br />
[77.3 mm]<br />
.308<br />
[7.8 mm]<br />
.420<br />
[10.7 mm]<br />
40°<br />
1.000<br />
[25.4 mm]<br />
2.000<br />
[50.8 mm]<br />
2.844<br />
[72.2 mm]<br />
CONTACT TRUTH FOR OTHER OPTIONS<br />
.326<br />
[8.3 mm]<br />
.320<br />
[8.1 mm]<br />
RECOMMENDED SCREWS:<br />
(QTY 2)#8 PHILLIPS FLAT HEAD SCREWS<br />
(LENGTH AND THREAD TYPE TO<br />
BE DETERMINED BY PROFILE)
19<br />
FuSION SYSTEM<br />
P<br />
F FIG. 8 FUSION 8 FUSION <strong>LOCK</strong> <strong>LOCK</strong> ASSEMBLY ASSEMBLY (FOR VINYL (FOR APPLICATIONS)<br />
VINYL APPLICATIONS)<br />
EXTERIOR VIEW<br />
INTERIOR VIEW<br />
COVER ASSEMBLY<br />
19.70.XX.100<br />
STRAP<br />
22196<br />
BASE ASSEMBLY<br />
19.71.00.100<br />
STRAP GUIDE<br />
(INCLUDED WITH<br />
BASE 19.71.00.100)<br />
LATCH<br />
12744<br />
LATCH<br />
12744<br />
15g
FIG. 9 FUSION KEEPER ASSEMBLY (FOR VINYL APPLICATIONS)<br />
19 FuSION SYSTEM 15h
19<br />
FuSION SYSTEM<br />
F<br />
FIG. 10 FUSION KEEPER APPLICATION (FOR VINYL WINDOW APPLICATIONS)<br />
2.750<br />
[69.8 mm]<br />
.342<br />
[8.7 mm]<br />
1.250<br />
[31.8 mm]<br />
.334<br />
[8.5 mm]<br />
1.152<br />
[29.3 mm]<br />
2.857<br />
[72.6 mm]<br />
R.625<br />
[15.9 mm]<br />
FULL R<br />
.750<br />
[19.0 mm]<br />
2.765<br />
[70.2 mm]<br />
.453<br />
[11.5 mm]<br />
CUSTOMER<br />
DEPENDENT<br />
2.000<br />
[50.8 mm]<br />
FULL R<br />
KEEPER LAYOUT<br />
15i
19 FuSION SYSTEM 15j<br />
FIG. 11 FUSION APPLICATION FOR VINYL WINDOWS WITH INSERTS<br />
.875 MIN/2.000 MAX<br />
.425<br />
[10.8 mm]<br />
.925<br />
23.5 mm<br />
REINFORCING INSERT POSITIONING<br />
(1.391 MIN)<br />
[35.3 mm]<br />
(1.250 PLUS VINYL WALL THICKNESS<br />
PLUS INSERT WALL THICKNESS)<br />
.425<br />
10.8 mm<br />
.782<br />
[2.0 cm]<br />
.287<br />
[7.3 mm]<br />
.500<br />
[12.7 mm]<br />
(1.210 MIN)<br />
(1.070 PLUS VINYL<br />
WALL THICKNESS PLUS<br />
INSERT WALL THICKNESS)<br />
.574<br />
[14.6 mm]<br />
Ø.634<br />
[16.1 mm]<br />
TANGENT TO INSERT<br />
INTERNAL WALLS 2X<br />
REINFORCING INSERT<br />
CUSTOMER DEPENDENT<br />
TOP <strong>LOCK</strong> RAIL WITH INSERT<br />
CUSTOMER DEPENDENT<br />
.063<br />
[1.6 mm]<br />
.782<br />
[19.9 mm]<br />
Ø.625<br />
[15.9 mm]
19<br />
FuSION SYSTEM<br />
15k<br />
700 WEST BRIDGE STREET, OWATONNA, MN 55060 n 507.451.5620 800.866.7884 n TRUTH.COM
DOUBLE HUNG<br />
SLIDER<br />
19 HARMONY SYSTEM 15.1<br />
HARMONY SYSTEM<br />
Building on the popularity we received<br />
on our award-winning Fusion<br />
System, <strong>Truth</strong> <strong>Hardware</strong> has now<br />
embarked on the next generation<br />
combination lock and tilt latch system<br />
named, the Harmony System. Aptly<br />
named, as this system beautifully<br />
integrates the check rail lock and tilt<br />
latch together in a manner which creates<br />
a new level of installation ease.<br />
INTEGRATED TECHNOLOGY<br />
The Harmony System has been designed<br />
to allow the homeowner to activate the<br />
lock and tilt latches with the same<br />
device. By simply manipulating the<br />
lever on one lock, an individual can<br />
both lock or unlock their window, and<br />
activate the tilt latches to pivot the sash<br />
to allow for ease of cleaning.<br />
Manufacturers will appreciate the ease of<br />
installation - you just snap in the tilt<br />
latch, screw down the lock and you are<br />
good to go. The Harmony system even<br />
self-locates for you!<br />
Harmony System (locked)<br />
TILT LATCHES OFFERED IN<br />
TWO VERSIONS – The Standard<br />
Harmony Latch and the new<br />
Harmony 7 Latch.<br />
The Standard Harmony latch version<br />
should be considered when there is an<br />
existing reinforcement surface for<br />
mounting or if the internal<br />
reinforcement can be modified. If this is<br />
not the case, then the Harmony 7 Latch<br />
version is the better choice.<br />
FEATURES & BENEFITS<br />
• Lock and tilt latch release are actuated<br />
by one mechanism<br />
• Quick and easy assembly<br />
• Self locating features in lock and latch!<br />
• Latches are hidden within the<br />
checkrail, thus producing cleaner site<br />
lines on the window.<br />
• Simple routing for lock and latch<br />
• Detents and icons indicate<br />
lock/unlock/tilt positions<br />
• Harmony 7 latches are color coded for<br />
quick identification of correct hand<br />
• Matching, non-actuating lock<br />
assembly available for applications<br />
where you don’t want an integrated<br />
lock/latch!<br />
Harmony System (unlocked)<br />
LOGO OPTIONS<br />
You can personalize the Harmony<br />
System with your logo. <strong>Truth</strong>’s pad<br />
printing process is a great way to<br />
highlight your company’s identity and<br />
reinforce your brand in the marketplace.<br />
WARRANTY<br />
Protected under the terms of the <strong>Truth</strong><br />
Warranty for Window & Door<br />
Manufacturers and Authorized<br />
Distributors. Refer to <strong>Truth</strong>’s Terms &<br />
Conditions for further details.<br />
MATERIAL<br />
Housing assembly is powder coated<br />
diecast zinc. Latch assemblies are of a<br />
composite construction consisting of<br />
engineered plastics and stainless steel, or<br />
SST wire.<br />
FINISH<br />
Electrostatically applied, durable<br />
coatings that provide excellent resistance<br />
to chipping, scratching and corrosion<br />
resistance while maintaining color<br />
stability for years in direct sunlight.<br />
Harmony System (tilt latch retracted)<br />
Please refer to <strong>Truth</strong>’s color chart for<br />
examples of <strong>Truth</strong>’s most popular finish<br />
options. <strong>Truth</strong> also offers a wide range<br />
of decorative “plated” finishes – contact<br />
<strong>Truth</strong> for additional information on<br />
availability of these finishes on specific<br />
product lines.<br />
ORDERING INFORMATION<br />
Order the Harmony System by<br />
individual components:<br />
<strong>LOCK</strong>S: (same lock used for either<br />
Harmony or Harmony 7 applications)<br />
# 19.77.XX.010 – Housing/Lever<br />
LH Lock assembly<br />
# 19.77.XX.020 – Housing/Lever<br />
RH Lock assembly<br />
# 19.78.XX.010 – Housing/Lever<br />
Assembly – Passive (for use on<br />
applications without integrated latch)
19<br />
HARMONY SYSTEM<br />
KEEPERS: (same keeper used for<br />
either Harmony of Harmony 7<br />
applications – see drawings for available<br />
keeper designs)<br />
# 45678.XX Keeper<br />
# 42052.XX Keeper<br />
# 45674.XX Keeper<br />
# 33676.XX Keeper<br />
# 45686.XX Keeper (special to<br />
Trustgard window design)<br />
LATCHES (Standard Harmony Latches)<br />
# 14222 – Standard Harmony Latch<br />
assembly (LH)<br />
# 14223 – Standard Harmony Latch<br />
assembly (RH)<br />
# 14306 – Standard Harmony Latch<br />
assembly with offset (LH)<br />
# 14307 – Standard Harmony Latch<br />
assembly with offset (RH)<br />
RECOMMENDED SCREWS (sold<br />
separately)<br />
4 - # 6 Phillips Flat Head Screws<br />
(Length and thread type to be determined<br />
by profile). For additional information<br />
on screw selection – see <strong>Truth</strong> Tips.<br />
TRUTH TIPS<br />
1. When two locks are used on one<br />
window, the placement of each lock,<br />
with respect to its keeper, becomes very<br />
critical to maintain a consistent weather<br />
seal on all sides of the window and to<br />
insure that each lock engages properly<br />
with its keeper.<br />
2. For vinyl window applications,<br />
mounting screws should pass through<br />
two PVC walls or one PVC Wall and<br />
one insert wall.<br />
The following Tilt Latches<br />
require<br />
# 45683 – Cage (purchased<br />
separately):<br />
(Harmony 7 latches)<br />
# 14321 – 5” Tilt Latch (LH)<br />
# 14322 – 5” Tilt Latch (RH)<br />
# 14323 – 7” Tilt Latch (LH)<br />
# 14324 – 7” Tilt Latch (RH)<br />
# 14325 – 9” Tilt Latch (LH)<br />
# 14326 – 9” Tilt Latch (RH)<br />
15.1a
19 HARMONY SYSTEM 15.1b<br />
FIG. 1 19.77.XX.020 RH <strong>LOCK</strong> SHOWN (19.77.XX.010 LH <strong>LOCK</strong>)<br />
3.000<br />
76.2<br />
2.000<br />
50.8<br />
1.500<br />
38.1<br />
1.313<br />
33.3<br />
2X .56<br />
14.29<br />
1.188<br />
30.2<br />
.500<br />
12.7<br />
RECOMMENED SCREWS:<br />
(QYT 2) #6 PHILLIPS FLAT HEAD SCREWS<br />
(LENGTH AND THREAD TYPE TO<br />
BE DETERMINED BY PROFILE)<br />
1.500<br />
38.1<br />
.340<br />
8.6<br />
FIG. 2 19.78.XX.010 LH <strong>LOCK</strong> PASSIVE SHOWN<br />
1.500<br />
38.1<br />
3.000<br />
76.2<br />
2.000<br />
50.8<br />
1.313<br />
33.3<br />
2X .56<br />
14.29<br />
1.188<br />
30.2<br />
1.719<br />
43.67<br />
.500<br />
12.7<br />
.340<br />
8.6<br />
RECOMMENED SCREWS:<br />
(QYT 2) #6 PHILLIPS FLAT HEAD SCREWS<br />
(LENGTH AND THREAD TYPE TO<br />
BE DETERMINED BY PROFILE)<br />
1.500<br />
38.1
19<br />
HARMONY SYSTEM<br />
FIG. 3 LH LATCH 14222 SHOWN (RH LATCH IS 14223)<br />
2.50<br />
63.5<br />
7.75<br />
196.9<br />
.375<br />
9.5<br />
.486<br />
12.3<br />
.666<br />
16.9<br />
.420<br />
10.7<br />
.383<br />
9.7<br />
.350<br />
8.9<br />
FIG. 4 LH LATCH 14306 SHOWN (RH LATCH IS 14307)<br />
7.75<br />
196.9<br />
.375<br />
9.5<br />
.666<br />
16.9<br />
.302<br />
7.7<br />
.486<br />
12.3<br />
.383<br />
9.73<br />
.350<br />
8.9<br />
.<br />
15.1c
19 HARMONY SYSTEM 15.1d<br />
FIG. 5 19.77.XX.010 AND 19.77.XX.020 <strong>LOCK</strong> ASSEMBLY TO STANDARD HARMONY LATCHES
19<br />
HARMONY SYSTEM<br />
FIG. 6 19.77.XX.010 <strong>LOCK</strong> APPLICATION<br />
2.000<br />
50.8<br />
.<br />
1.200<br />
30.48<br />
(FROM <strong>LOCK</strong> FRONT<br />
EDGE)<br />
1.520<br />
38.6<br />
MIN<br />
1.540<br />
39.1<br />
MAX<br />
"A"<br />
.563<br />
14.3<br />
(FROM <strong>LOCK</strong><br />
FRONT EDGE)<br />
A<br />
A<br />
R.500<br />
12.7<br />
.345<br />
8.8<br />
MIN<br />
SECTION<br />
A-A<br />
"A"<br />
5.000" (127.0mm)<br />
7.000" (177.8mm)<br />
.506<br />
12.85<br />
.738<br />
18.74<br />
(FROM <strong>LOCK</strong> FRONT EDGE)<br />
(127.0mm)<br />
7 (177.8mm)<br />
.137<br />
3.48<br />
.403<br />
10.24<br />
1.201<br />
30.5<br />
(FROM <strong>LOCK</strong> FRONT EDGE)<br />
15.1e<br />
1
19 HARMONY SYSTEM 15.1f<br />
FIG. 7 19.77.XX.020 RH <strong>LOCK</strong> SHOWN (19.77.010 LH <strong>LOCK</strong>)<br />
3.000<br />
76.2<br />
2.000<br />
50.8<br />
1.500<br />
38.1<br />
1<br />
1.313<br />
33.3<br />
2X .56<br />
14.29<br />
1.188<br />
30.2<br />
.500<br />
12.7<br />
RECOMMENED SCREWS:<br />
(QYT 2) #6 PHILLIPS FLAT HEAD SCREWS<br />
(LENGTH AND THREAD TYPE TO<br />
BE DETERMINED BY PROFILE)<br />
1.500<br />
38.1<br />
.340<br />
8.6<br />
FIG. 8 19.78.XX.010 LH <strong>LOCK</strong> PASSIVE SHOWN<br />
1.500<br />
38.1<br />
3.000<br />
76.2<br />
2.000<br />
50.8<br />
1.313<br />
33.3<br />
2X .56<br />
14.29<br />
1.188<br />
30.2<br />
1.719<br />
43.7<br />
.500<br />
12.7<br />
.340<br />
8.6<br />
RECOMMENED SCREWS:<br />
R (QYT 2) #6 PHILLIPS FLAT HEAD SCREWS<br />
(LENGTH AND THREAD TYPE TO<br />
BE DETERMINED BY PROFILE)<br />
1.500<br />
38.1
19<br />
HARMONY SYSTEM<br />
FIG. 9 5” LATCH 14321 SHOWN (5” RH LATCH IS 14322)<br />
.319<br />
8.1<br />
Ø .490<br />
12.4<br />
.320<br />
8.1<br />
6.75<br />
171.4<br />
.375<br />
9.5<br />
.190<br />
4.8<br />
FIG. 10 7” 14323 LH SHOWN (7” RH LATCH 14324)<br />
.319<br />
8.1<br />
Ø .490<br />
12.4<br />
.320<br />
8.1<br />
8.75<br />
222.2<br />
.375<br />
9.5<br />
.190<br />
4.8<br />
FIG. 11 9” LH 14325 SHOWN (9” RH LATCH 14326)<br />
.319<br />
8.1<br />
Ø .490<br />
12.4 .320<br />
8.1<br />
10.75<br />
273.0<br />
.375<br />
9.5<br />
.190<br />
4.8<br />
15.1g
19 HARMONY SYSTEM 15.1h<br />
FIG. 12 45683 CAGE<br />
R.505<br />
12.8<br />
1.243<br />
31.6<br />
.395<br />
10.0<br />
1.61<br />
40.9<br />
.445<br />
11.3
19<br />
HARMONY SYSTEM<br />
FIG. 13 19.77.XX.010 AND 19.77.XX.020 <strong>LOCK</strong> ASSEMBLY TO HARMONY 7 <strong>LOCK</strong> LATCHES<br />
15.1i
19 HARMONY SYSTEM 15.1j<br />
FIG. 14 19.77 HARMONY 7 <strong>LOCK</strong> APPLICATION<br />
"A"<br />
2.000<br />
50.8<br />
A<br />
A<br />
1.248<br />
31.69<br />
(FROM <strong>LOCK</strong><br />
FRONT EDGE)<br />
R.500<br />
12.7<br />
.563<br />
14.3<br />
(FROM <strong>LOCK</strong><br />
FRONT EDGE)<br />
1.620 MIN<br />
41.1<br />
1.640 MAX<br />
41.7<br />
.400<br />
10.2<br />
MIN<br />
SECTION A-A<br />
SCALE 1 : 1<br />
"A"<br />
5.000" (127.0)<br />
7.000" (177.8)<br />
9.000" (228.6)<br />
.328<br />
8.3<br />
Ø .500<br />
12.70<br />
X 2.500 MIN<br />
1.254 MAX<br />
31.8<br />
(FROM <strong>LOCK</strong> FRONT EDGE)<br />
.629 MIN<br />
16.0<br />
(FROM <strong>LOCK</strong> FRONT EDGE)<br />
.789<br />
20.0<br />
MIN SET BACK<br />
(FROM <strong>LOCK</strong> FRONT EDGE)<br />
1.414<br />
35.9<br />
MAX SET BACK<br />
(FROM <strong>LOCK</strong> FRONT EDGE)
19<br />
HARMONY SYSTEM<br />
FIG. 15 42052.XX KEEPER<br />
1.750<br />
44.5<br />
.17<br />
4.31<br />
1.38<br />
35.10<br />
RECOMMENDED SCREWS:<br />
(QTY 2) #6 PHILLIPS FLAT HEAD<br />
SCREWS (LENGTH AND THREAD<br />
TYPE TO BE DETERMINED BY PROFILE)<br />
1.00<br />
25.40<br />
1<br />
Ø .150<br />
3.8<br />
.24<br />
6.19<br />
FIG. 16 45674.XX KEEPER<br />
1.750<br />
44.5<br />
.20<br />
5.17<br />
1.42<br />
35.97<br />
R<br />
RECOMMENDED SCREWS:<br />
1.00<br />
25.40<br />
Ø .150<br />
3.8<br />
.38<br />
9.68<br />
(QTY 2)#6 PHILLIPS FLAT HEAD<br />
SCREWS (LENGTH AND THREAD<br />
TYPE TO BE DETERMINED BY PROFILE)<br />
15.1k
19 HARMONY SYSTEM 15.1l<br />
FIG. 17 45678.XX KEEPER<br />
2.000<br />
50.8<br />
.14<br />
3.48<br />
3.000<br />
76.2<br />
Ø .275<br />
7.0<br />
.59<br />
14.99<br />
.340<br />
8.64<br />
RECOMMENDED SCREWS:<br />
(QTY 2) #6 PHILLIPS FLAT HEAD SCREWS<br />
(LENGTH AND THREAD TYPE TO<br />
BE DETERMINED BY PROFILE)<br />
.249<br />
6.33<br />
.32<br />
8.13<br />
FIG. 18 33676.XX KEEPER<br />
1.75<br />
44.5<br />
.250<br />
6.35<br />
.559<br />
14.2<br />
.18<br />
4.50<br />
3.00<br />
76.20<br />
.47<br />
11.9<br />
1.41<br />
35.72<br />
RECOMMENDED SCREWS:<br />
(QTY 2) #6 PHILLIPS FLAT HEAD SCREWS<br />
(LENGTH AND THREAD TYPE TO<br />
BE DETERMINED BY PROFILE)
19<br />
HARMONY SYSTEM<br />
15.1m<br />
700 WEST BRIDGE STREET, OWATONNA, MN 55060 ■ 507.451.5620 800.866.7884 ■ TRUTH.COM
DOUBLE HUNG<br />
SLIDER<br />
TILT LATcHES<br />
<strong>Truth</strong> <strong>Hardware</strong> Tilt Latches are<br />
designed to provide window<br />
manufacturers the highest quality<br />
product at a minimum cost. With several<br />
variations to choose from, these Tilt<br />
Latches are engineered with labor saving<br />
and design features to fit virtually every<br />
existing window profile in today’s<br />
marketplace.<br />
MOUNTING OPTIONS<br />
Options include <strong>Truth</strong>’s revolutionary<br />
“snap-in” mount and the “hidden<br />
mounting fastener”, as well as<br />
ourstandard “top mounted” fasteners<br />
–each of which affords dependable<br />
operation with secure methods for<br />
installation. (See following drawings for<br />
available options).<br />
WARRANTY:<br />
Protected under the terms of the<br />
“<strong>Truth</strong> Warranty for Window &<br />
Door Manufacturers & Authorized<br />
Distributors”. Refer to <strong>Truth</strong>’s<br />
Terms & Conditions for further<br />
details<br />
MATERIAL:<br />
Composite assemblies of powder<br />
coated cast zinc and/or thermoplastics.<br />
ORDERING INFORMATION &<br />
OPTIONS:<br />
1.Choose Tilt Latch style (specify by<br />
part number).<br />
2.Specify left or right hand (if<br />
necessary).<br />
3.Order screws required (if necessary).<br />
4.Specify desired finish.<br />
FINISH:<br />
Electrostatically applied, durable<br />
coatings that provide excellent<br />
resistance to chipping, scratching and<br />
corrosion while maintaining color<br />
stability for years in direct sunlight.<br />
Please refer to <strong>Truth</strong>’s Color Chart<br />
for examples of <strong>Truth</strong>’s most popular<br />
finish options. <strong>Truth</strong> also offers a<br />
wide range of decorative “plated”<br />
finishes – contact <strong>Truth</strong> for additional<br />
information on availability of these<br />
finishes on specific product lines.<br />
16
9750<br />
TILT LATcHES<br />
FIG. 1 46.20.XX.001 TILT LATCH<br />
.343<br />
[8.7 mm]<br />
LEFT HAND SHOWN<br />
46.20.XX.001 LEFT HAND<br />
46.20.XX.002 RIGHT HAND<br />
.281<br />
[7.1 mm]<br />
.050<br />
[1.3 mm]<br />
.060<br />
[1.5 mm]<br />
.687<br />
[17.4 mm]<br />
.714<br />
[18.1 mm]<br />
2.625<br />
[66.7 mm]<br />
.375<br />
[9.5 mm]<br />
.315<br />
[8.0 mm]<br />
.082<br />
[2.1 mm]<br />
.055<br />
[1.4 mm]<br />
.425<br />
[10.8 mm]<br />
2.550<br />
[64.8 mm]<br />
.285<br />
[7.2 mm]<br />
FULL R<br />
2.563<br />
[65.1 mm]<br />
TOP<br />
END<br />
.578<br />
[14.7 mm]<br />
ROUTING DETAIL<br />
.375<br />
[9.5 mm]<br />
16a
FIG. 2 46.21.XX.001 TILT LATCH<br />
LEFT HAND SHOWN<br />
.050<br />
[1.3 mm]<br />
.343<br />
[8.7 mm]<br />
46.21.XX.001 LEFT HAND<br />
46.21.XX.002 RIGHT HAND<br />
9750 TILT LATcHES 16b<br />
.281<br />
[7.1 mm]<br />
.060<br />
[1.5 mm]<br />
.687<br />
[17.4 mm]<br />
.714<br />
[18.1 mm]<br />
2.625<br />
[66.7 mm]<br />
.375<br />
[9.5 mm]<br />
.315<br />
[8.0 mm]<br />
.082<br />
[2.1 mm]<br />
.055<br />
[1.4 mm]<br />
.425<br />
[10.8 mm]<br />
2.550<br />
[64.8 mm]<br />
.285<br />
[7.2 mm]<br />
FULL R<br />
2.563<br />
[65.1 mm]<br />
TOP<br />
.578<br />
[14.7 mm]<br />
ROUTING DETAIL<br />
END<br />
.375<br />
[9.5 mm]
9750<br />
TILT LATcHES<br />
FIG. 3 46.11 TILT LATCH<br />
2.932<br />
[74.5 mm]<br />
.843<br />
[21.4 mm]<br />
.380<br />
[9.6 mm]<br />
.268<br />
[6.8 mm]<br />
.060<br />
[1.5 mm]<br />
.168<br />
[4.3 mm]<br />
.865<br />
[22.0 mm]<br />
.685<br />
[17.4 mm]<br />
.810<br />
[20.6 mm]<br />
1.785<br />
[45.3 mm]<br />
.103<br />
[2.6 mm]<br />
.460<br />
[11.7 mm]<br />
2.843<br />
[72.2 mm]<br />
.268<br />
[6.8 mm]<br />
RECOMMENDED SCREW:<br />
LEFT HAND SHOWN<br />
46.11.XX.101 LEFT HAND<br />
46.11.XX.102 RIGHT HAND<br />
WOOD/PVC: (QTY 2)#8 PHILLIPS FLAT HEAD<br />
SCREWS(LENGTH AND THREAD TYPE<br />
TO BE DETERMINED BY PROFILE.)<br />
FIG. 4 46.12 TILT LATCH<br />
2.932<br />
[74.5 mm]<br />
.160<br />
[4.1 mm]<br />
.385<br />
[9.8 mm]<br />
.513<br />
[13.0 mm]<br />
.060<br />
[1.5 mm]<br />
.685<br />
[17.4 mm]<br />
.168<br />
[4.3 mm]<br />
.810<br />
[20.6 mm]<br />
1.785<br />
[45.3 mm]<br />
.281<br />
[7.1 mm]<br />
.865<br />
[22.0 mm]<br />
.460<br />
[11.7 mm]<br />
2.843<br />
[72.2 mm]<br />
.103<br />
[2.6 mm]<br />
.268<br />
[6.8 mm]<br />
<strong>LOCK</strong>ING<br />
TAB<br />
2.065<br />
[52.5 mm]<br />
NON HANDED<br />
RECOMMENDED SCREW:<br />
SECTION A-A<br />
WOOD/PVC: (QTY 2)#8 PHILLIPS FLAT HEAD<br />
SCREWS(LENGTH AND THREAD TYPE<br />
TO BE DETERMINED BY PROFILE.)<br />
16c
TILT LATcHES<br />
FIG. 5 1038L TILT LATCH (SNAP IN)<br />
LEFT HAND SHOWN<br />
.276<br />
[7.0 mm]<br />
.060<br />
[1.5 mm]<br />
.135<br />
[3.4 mm]<br />
.733<br />
[18.6 mm]<br />
CL<br />
2.450<br />
[62.2 mm]<br />
.355<br />
[9.0 mm]<br />
.440<br />
[11.2 mm]<br />
.108<br />
[2.7 mm]<br />
.080<br />
[2.0 mm]<br />
1.074<br />
[27.3 mm]<br />
A<br />
2.420<br />
[61.5 mm]<br />
A<br />
.235<br />
[6.0 mm]<br />
42°<br />
LEFT HAND SHOWN<br />
.566<br />
[14.4 mm]<br />
1038L.XX LEFT HAND<br />
1038R.XX RIGHT HAND<br />
SNAP IN TAB<br />
2.350<br />
[59.7 mm]<br />
.683<br />
[17.3 mm]<br />
SECTION A-A<br />
FIG. 6 4200 & 4210 TILT LATCH<br />
2.610<br />
[66.3 mm]<br />
.862<br />
[21.9 mm]<br />
.262<br />
[6.7 mm]<br />
.325<br />
[8.3 mm]<br />
.555<br />
[14.1 mm]<br />
LC<br />
.672<br />
[17.1 mm]<br />
4200L.XX LEFT HAND<br />
4210R.XX RIGHT HAND<br />
.295<br />
[7.5 mm]<br />
.120<br />
[3.0 mm]<br />
.122<br />
.210 [3.1 mm]<br />
[5.3 mm]<br />
LEFT HAND SHOWN<br />
RECOMMENDED SCREW:<br />
2.120<br />
[53.8 mm]<br />
.235<br />
[6.0 mm]<br />
WOOD/PVC: (QTY 1)#8 PHILLIPS FLAT<br />
HEAD SCREWS(LENGTH AND<br />
THREAD TYPE TO BE<br />
DETERMINED BY PROFILE.)<br />
16d
TILT LATcHES<br />
FIG. 7 4260 TILT LATCH<br />
.670<br />
[17.0 mm]<br />
2.597<br />
[66.0 mm]<br />
.354<br />
[9.0 mm]<br />
.135<br />
[3.4 mm]<br />
.075<br />
[1.9 mm]<br />
.550<br />
[14.0 mm]<br />
1.25<br />
[31.7 mm]<br />
24°<br />
.315<br />
[8.0 mm]<br />
.670<br />
[17.0 mm]<br />
.108<br />
[2.7 mm]<br />
.329<br />
[8.4 mm]<br />
.237<br />
[6.0 mm]<br />
RIGHT HAND SHOWN<br />
4260.XX RIGHT HAND<br />
4270.XX LEFT HAND<br />
.050<br />
[1.3 mm]<br />
2.547<br />
[64.7 mm]<br />
.070<br />
[1.8 mm]<br />
RECOMMENDED SCREWS:<br />
(1 QTY) #8 SCREW WITH A #7 HEAD<br />
(LENGTH AND THREAD TYPE TO BE<br />
DETERMINED BY PROFILE)<br />
FIG. 8 4250 TILT LATCH<br />
3.082<br />
[78.3 mm]<br />
.288<br />
[7.3 mm]<br />
.086<br />
[2.2 mm]<br />
C<br />
.958<br />
[24.3 mm]<br />
1.554<br />
[39.5 mm]<br />
.162<br />
[4.1 mm]<br />
.560<br />
[14.2 mm]<br />
.495<br />
[12.6 mm]<br />
.314<br />
[8.0 mm]<br />
.132<br />
[3.4 mm]<br />
.096<br />
[2.4 mm]<br />
NON-HANDED<br />
.050<br />
[1.3 mm]<br />
2.955<br />
[75.1 mm]<br />
.234<br />
[5.9 mm]<br />
RECOMMENDED SCREWS:<br />
(1 QTY) #8 SCREW WITH A #7 HEAD<br />
(LENGTH AND THREAD TYPE TO BE<br />
DETERMINED BY PROFILE)<br />
16e
TILT LATcHES<br />
FIG. 9 46.13 TILT LATCH<br />
2.870<br />
[72.9 mm]<br />
1.483<br />
[37.7 mm]<br />
.440<br />
[11.2 mm]<br />
.375<br />
[9.5 mm]<br />
.080<br />
[2.0 mm]<br />
.085<br />
[2.2 mm]<br />
.543<br />
[13.8 mm]<br />
.077<br />
[2.0 mm]<br />
.223<br />
[5.7 mm]<br />
.080<br />
[2.0 mm]<br />
.315<br />
[8.0 mm]<br />
.750<br />
[19.0 mm]<br />
.550<br />
[14.0 mm]<br />
.507<br />
[12.9 mm]<br />
LEFT HAND SHOWN<br />
46.13.32.101 LEFT HAND<br />
46.13.32.102 RIGHT HAND<br />
.430<br />
[10.9 mm]<br />
2.500<br />
[63.5 mm]<br />
RECOMMENDED SCREWS:<br />
WOOD/PVC (QTY 1) #6 PHILLIPS FLAT HEAD<br />
SCREWS (LENGTH AND THREAD TYPE<br />
TO BE DETERMINED BY PROFILE)<br />
16f
16g<br />
700 west bridge street, owatonna, mn 55060 n 507.451.5620 800.866.7884 n TRUTH.COM
DOUBLE HUNG<br />
SLIDER<br />
<strong>SASH</strong> LIFTS<br />
<strong>Truth</strong> Sash Lifts help provide easy<br />
opening and closing of all double-hung<br />
or sliding windows. <strong>Truth</strong>’s new<br />
#18.16 Series Restoration Sash Lift<br />
with its traditional finger-pull look, is<br />
designed to complement <strong>Truth</strong>’s #17.02<br />
Series Restoration Lock. <strong>Truth</strong>’s Sash<br />
Lifts encourage the lifting of the<br />
window from the bottom, thereby<br />
putting less stress on the sash than<br />
would occur from pushing on the top<br />
rail. Durable baked enamel finishes are<br />
available to match <strong>Truth</strong> Check Rail<br />
Locks.<br />
WARRANTY: Protected under the<br />
terms of the “<strong>Truth</strong> Warranty for<br />
Window & Door Manufacturers &<br />
Authorized Distributors”. Refer to<br />
<strong>Truth</strong>’s Terms & Conditions for further<br />
details.<br />
MATERIAL: High-pressure, corrosion<br />
resistant, die-cast zinc.<br />
FINISH: Electrostatically applied,<br />
durable coatings that provide excellent<br />
resistance to chipping, scratching and<br />
corrosion while maintaining color<br />
stability for years in direct sunlight.<br />
Please refer to <strong>Truth</strong>’s Color Chart for<br />
examples of <strong>Truth</strong>’s most popular<br />
finish options. <strong>Truth</strong> also offers a<br />
wide range of decorative “plated”<br />
finishes – contact <strong>Truth</strong> for additional<br />
information on availability of these<br />
finishes on specific product lines.<br />
ORDERING INFORMATION &<br />
OPTIONS:<br />
1. Choose Sash Lift style (specify by<br />
part number).<br />
2. Specify finish number.<br />
Types of screws required determined by<br />
material of profile used (sold<br />
separately). For additional information<br />
regarding screw selection - see <strong>Truth</strong><br />
Tips.<br />
TRUTH TIPS:<br />
1. For accurate hardware placement in<br />
vinyl or metal applications, pre-drilling<br />
of the window profile is recommended.<br />
2. For vinyl window applications,<br />
mounting screws should pass through<br />
two PVC walls, or one PVC wall and<br />
one insert wall. For this reason, it<br />
may be necessary to use a longer screw<br />
than is recommended.<br />
3. For metal window profiles, <strong>Truth</strong><br />
recommends stainless steel machine<br />
screws. However, in most<br />
applications, stainless steel sheet metal<br />
screws will provide adequate holding<br />
power.<br />
INCLUDE TRUTH SPECS ON<br />
YOUR NEXT WINDOW PROJECT<br />
Window sash handles shall be included<br />
which will provide a positive grip on<br />
the sash for easy window operation,<br />
while having a low profile appearance.<br />
The sash handles shall be constructed<br />
of a high pressure zinc alloy die<br />
casting.<br />
Window handles/sash lifts shall be<br />
manufactured by <strong>Truth</strong> <strong>Hardware</strong>.<br />
RECOMMENDED SCREWS:<br />
17
18.10<br />
<strong>SASH</strong> LIFTS<br />
FIG. 1 18.10 <strong>SASH</strong> LIFT<br />
3.310<br />
[84.1 mm]<br />
.375<br />
[9.5 mm]<br />
.755<br />
[19.2 mm]<br />
4.000<br />
[101.6 mm]<br />
RECOMMENDED SCREWS:<br />
WOOD: (QTY 2) (P/N 19380) #8 PHILLIPS, FLAT HEAD,<br />
SHEET METAL SCREWS<br />
PVC/METAL: (QTY 2) #10 PHILLIPS, FLAT HEAD (LENGTH AND<br />
THREAD TYPE TO BE DETERMINED BY PROFILE)<br />
FIG. 2 18.11 <strong>SASH</strong> LIFT<br />
3.800<br />
[96.5 mm]<br />
1.118<br />
[28.4 mm]<br />
1.115<br />
[28.3 mm]<br />
.187<br />
[4.7 mm]<br />
3.250<br />
[82.6 mm]<br />
RECOMMENDED SCREWS:<br />
WOOD: (QTY 2) (P/N 19380) #10 X 1.0 PHILLIPS, FLAT HEAD,<br />
SHEET METAL SCREWS<br />
PVC/METAL: (QTY 2) #10 PHILLIPS, FLAT HEAD (LENGTH AND<br />
THREAD TYPE TO BE DETERMINED BY PROFILE)<br />
17a
18.10 <strong>SASH</strong> LIFTS 17b<br />
FIG. 3 18.16 <strong>SASH</strong> LIFT<br />
.972<br />
[24.7 mm]<br />
1.275<br />
[32.4 mm]<br />
.900<br />
[22.9 mm]<br />
.341<br />
[8.7 mm]<br />
.750<br />
[19.0 mm]<br />
1.654<br />
[42 mm]<br />
RECOMMENDED SCREWS:<br />
(QTY 2) #8-32 PHILLIPS FLAT<br />
HEAD SREW (LENGTH AND THREAD TYPE<br />
TO BE DETERMINED BY PROFILE)<br />
FIG. 4 11861.XX <strong>SASH</strong> LIFT<br />
.978<br />
[24.8 mm]<br />
.126<br />
[3.2 mm]<br />
4.063<br />
[103.2 mm]<br />
.282<br />
[7.2 mm]<br />
3.498<br />
[88.9 mm]<br />
RECOMMENDED SCREWS:<br />
(QTY 2) #8-32 PHILLIPS FLAT<br />
HEAD SREW (LENGTH AND THREAD TYPE<br />
TO BE DETERMINED BY PROFILE)
18.10<br />
<strong>SASH</strong> LIFTS<br />
FIG. 5 30665.XX RECESSED <strong>SASH</strong> LIFT<br />
2.500<br />
[63.5 mm]<br />
Ø.281<br />
[7.1 mm]<br />
.745<br />
[18.9 mm]<br />
.175<br />
[4.4 mm]<br />
.650<br />
[17 mm]<br />
R.375<br />
4.000<br />
[101.6 mm]<br />
ROUTING<br />
1.250<br />
[32 mm]<br />
.750<br />
[19.0 mm]<br />
.170<br />
[4.3 mm]<br />
RECOMMENDED SCREWS:<br />
.300<br />
[7.6 mm]<br />
WOOD: (QTY 2) (P/N 19051) #6 X 1" PHILLIPS<br />
FLAT HEAD SHEET METAL SCREWS.<br />
.050<br />
[1.3 mm]<br />
17c<br />
700 WEST BRIDGE STREET, OWATONNA, MN 55060 n 507.451.5620 800.866.7884 n TRUTH.COM
DOUBLE HUNG<br />
SLIDER<br />
WINDOW ROLLERS<br />
<strong>Truth</strong> <strong>Hardware</strong> offers a wonderful<br />
series of rollers designed specifically<br />
for the window market. <strong>Truth</strong>’s 4231<br />
and 4233 Series Window Rollers help<br />
create almost effortless travel for slider<br />
windows. Available with brass wheels<br />
and mounted into a sturdy nylon case,<br />
<strong>Truth</strong>’s Window Rollers will produce<br />
long-lasting reliable service for the<br />
homeowner. <strong>Truth</strong>’s window rollers are<br />
rated for up to a 30 lb. sash (2 rollers<br />
per sash). Please refer to the following<br />
drawings to see the models available.<br />
WARRANTY: Protected under the<br />
terms of the “<strong>Truth</strong> Warranty for<br />
Window & Door Manufacturers &<br />
Authorized Distributors”. Refer to<br />
<strong>Truth</strong>’s Terms & Conditions for further<br />
details.<br />
ORDERING INFORMATION &<br />
OPTIONS:<br />
Because of the variety of slider<br />
windows on the market, <strong>Truth</strong><br />
<strong>Hardware</strong> suggests that you contact<br />
our Product Specialists to help you<br />
identify the components that will best<br />
meet your requirements. To assist us in<br />
helping you identify the product that<br />
you need, please be prepared to<br />
provide <strong>Truth</strong> with:<br />
1. The type and style of profile that<br />
you are mounting the hardware to.<br />
2. The <strong>Truth</strong> <strong>Hardware</strong> Model Number<br />
that you are interested in.<br />
18
WINDOW ROLLERS<br />
FIG. 1 4233-1000 ROLLER<br />
1.500<br />
[38.1 mm]<br />
.556<br />
[14.1 mm]<br />
.416<br />
[10.5 mm]<br />
.435<br />
[11.0 mm]<br />
.500<br />
[12.7 mm]<br />
.090<br />
[2.2 mm]<br />
.230<br />
[5.8 mm]<br />
1.380<br />
[35.0 mm]<br />
.055<br />
[1.3 mm]<br />
1.420<br />
[36.0 mm]<br />
FIG. 2 4231-1000 ROLLER<br />
1.360<br />
[34.5 mm]<br />
.500<br />
[12.7 mm]<br />
1.38<br />
[35.0 mm]<br />
.380<br />
[9.6 mm]<br />
.562<br />
[14.2 mm]<br />
.500<br />
[12.7 mm]<br />
.400<br />
[10.1 mm]<br />
.062<br />
[1.5 mm]<br />
1.500<br />
[38.1 mm]<br />
.170<br />
[4.3 mm]<br />
18a<br />
700 west bridge street, owatonna, mn 55060 n 507.451.5620 800.866.7884 n TRUTH.COM
DOUBLEHUNG<br />
SLIDER<br />
PIVOT BARS<br />
<strong>Truth</strong> <strong>Hardware</strong> offers a complete line<br />
of Pivot Bars designed to accommodate<br />
most window profiles and application<br />
needs. Please refer to the following<br />
drawings to see the models available.<br />
WARRANTY: Protected under the<br />
terms of the “<strong>Truth</strong> Warranty for<br />
Window & Door Manufacturers &<br />
Authorized Distributors”. Refer to <strong>Truth</strong>’s<br />
Terms & Conditions for further details.<br />
ORDERING INFORMATION &<br />
OPTIONS:<br />
Because of the variety of windows on<br />
the market, <strong>Truth</strong> <strong>Hardware</strong> suggests<br />
that you contact our Product Specialists<br />
to help you identify the Pivot Bars that<br />
will best meet your requirements. To<br />
assist us in helping you identify the<br />
product that you need, please be<br />
prepared to provide <strong>Truth</strong> with:<br />
1. The type and style of profile that<br />
you are mounting the hardware to.<br />
2. The <strong>Truth</strong> <strong>Hardware</strong> Model<br />
Number that you are interested in.<br />
FIG. 1 23095 PIVOT BAR<br />
.665<br />
[16.9 mm]<br />
.638<br />
[16.2 mm]<br />
.420<br />
[10.7 mm]<br />
.081<br />
[2.1 mm]<br />
.375<br />
[9.5 mm]<br />
R.313<br />
[7.9 mm]<br />
2X Ø.163<br />
Ø.280<br />
.313<br />
[8.0 mm]<br />
.078<br />
[2.0 mm]<br />
.674<br />
[17.1 mm]<br />
FIG. 2 32935 LH PIVOT BAR NO WINGS<br />
.054<br />
[0.1 cm]<br />
.057<br />
[0.1 cm]<br />
.343<br />
[8.7 mm]<br />
3X Ø.120<br />
[3.0 mm]<br />
Ø.485<br />
[12.3 mm]<br />
.323<br />
[8.2 mm]<br />
.568<br />
[14.4 mm]<br />
.180<br />
[4.6 mm]<br />
1.293<br />
[32.8 mm]<br />
.189<br />
[4.8 mm]<br />
.083<br />
[2.1 mm]<br />
.311<br />
[7.9 mm]<br />
FIG. 3 32934 RH PIVOT BAR NO WINGS<br />
.057<br />
[1.5 mm]<br />
.343<br />
[0.9 cm]<br />
.055<br />
[1.4 mm]<br />
3X Ø.120<br />
[0.3 cm]<br />
Ø.485<br />
[12.3 mm]<br />
.083<br />
[2.1 mm]<br />
.568<br />
[14.4 mm]<br />
.180<br />
[4.6 mm]<br />
1.293<br />
[32.8 mm]<br />
.189<br />
[4.8 mm]<br />
.323<br />
[8.2 mm]<br />
.311<br />
[7.9 mm]<br />
19
PIVOT BARS<br />
FIG. 4 32937 PIVOT BAR<br />
.071<br />
[1.8 mm]<br />
.187<br />
[4.7 mm]<br />
.102<br />
[2.6 mm]<br />
.054<br />
[1.4 mm]<br />
3X Ø.120<br />
[3.0 mm]<br />
.057<br />
[1.5 mm]<br />
.463<br />
[11.8 mm]<br />
.343<br />
[8.7 mm]<br />
.100<br />
[2.5 mm]<br />
.312<br />
[7.9 mm]<br />
.568<br />
[14.4 mm]<br />
.180<br />
[4.6 mm]<br />
1.293<br />
[32.8 mm]<br />
.189<br />
[4.8 mm]<br />
Ø.485<br />
[1.2 cm]<br />
.312<br />
[7.9 mm]<br />
1.000<br />
[25.4 mm]<br />
FIG. 5 32936 RH PIVOT BAR<br />
.568<br />
[14.4 mm]<br />
1.293<br />
[32.8 mm]<br />
.180<br />
[4.6 mm]<br />
.189<br />
[4.8 mm]<br />
.463<br />
[11.8 mm]<br />
Ø.485<br />
[12.3 mm]<br />
.312<br />
[7.9 mm]<br />
.312<br />
[7.9 mm]<br />
.072<br />
[1.8 mm]<br />
.102<br />
[2.6 mm]<br />
3X Ø.120<br />
[3.0 mm]<br />
.568<br />
[14.4 mm]<br />
.100<br />
[2.5 mm]<br />
1.000<br />
[25.4 mm]<br />
.187<br />
[4.7 mm]<br />
.054<br />
[1.4 mm]<br />
.057<br />
[1.5 mm]<br />
.343<br />
[8.7 mm]<br />
FIG. 6 32794 PIVOT BAR<br />
.620<br />
[15.7 mm]<br />
2.893<br />
[73.5 mm]<br />
.468<br />
[11.9 mm]<br />
.350<br />
[8.9 mm]<br />
.398<br />
[10.1 mm]<br />
.233<br />
[5.9 mm]<br />
.311<br />
[7.9 mm]<br />
1.331<br />
[33.8 mm]<br />
.108<br />
[2.7 mm]<br />
.034<br />
[0.9 mm]<br />
1.344<br />
[34.1 mm]<br />
19a<br />
700 WEST BRIDGE STREET, OWATONNA, MN 55060 n 507.451.5620 800.866.7884 n TRUTH.COM
DOUBLEHUNG<br />
SLIDER<br />
MISCELLANEOUS<br />
<strong>Truth</strong> <strong>Hardware</strong> offers Vent Stops as an<br />
accessory for your sliding window.<br />
These snap-fit plastic components help<br />
limit the travel of the sliding window .<br />
WARRANTY: Protected under the<br />
terms of the “<strong>Truth</strong> Warranty for<br />
Window & Door Manufacturers &<br />
Authorized Distributors”. Refer to <strong>Truth</strong>’s<br />
Terms & Conditions for further details.<br />
FIG. 1 22833 VENT STOP<br />
1.025<br />
[26.0 mm]<br />
.112<br />
[2.8 mm]<br />
2.240<br />
[56.9 mm]<br />
2.187<br />
[55.5 mm]<br />
.595<br />
[15.1 mm]<br />
.240<br />
[6.1 mm]<br />
1.025<br />
[26.0 mm]<br />
20
MISCELLANEOUS<br />
20a 700 WEST BRIDGE STREET, OWATONNA, MN 55060 n 507.451.5620 800.866.7884 n TRUTH.COM