SASH LOCK - Truth Hardware

More documents

Recommendations

Info

9200 SASH LOCK & KEEPERS FIG. 19 41434 FACE MOUNT KEEPER .117 [3.0 mm] 1.994 [50.6 mm] .275 [7.0 mm] 1.041 [26.4 mm] .151 [3.8 mm] 1.000 [25.4 mm] 1.500 [38.1 mm] .244 [6.2 mm] .250 [6.4 mm] .195 [5.0 mm] FIG. 20 41405 KEEPER 2.050 [52.1 mm] .125 [3.2 mm] AVAILABLE LOCKS A A09200666 .872 (22.1mm) .060 (1.5mm) B .269 [6.8 mm] .442 [11.2 mm] 2.587 [65.7 mm] .250 [6.4 mm] RECOMMENDED SCREWS: (QTY2) #6 SHEET METAL SCREWS PHILLIPS FLAT HEAD SCREWS (LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE) 3k 700 WEST BRIDGE STREET, OWATONNA, MN 55060 n 507.451.5620 800.866.7884 n TRUTH.COM
DOUBLE HUNG SLIDER 17 TRIMLINE CAM LOCK By pulling meeting rails tightly together and by producing a better seal of the sash at the head and sill, the TrimLine TM Cam Lock decreases air infiltration. And with its new slimmer handle design, its low profile design helps assure maximum egress opening. An innovative spring design holds the handle in both the locked and unlocked positions while a concealed locking mechanism protects moving parts from dust and dirt for added lock life, too. For locks designed with alignment lugs, a positive sash alignment feature prevents side shift of the sash. An improved detent in both the locking and unlocking motion of the handle, assures that the cam has completed its travel. Designed for #6 mounting screws on 2.062” (52.4mm) center-tocenter hole spacing on both the lock and keepers. This lock produces a .125” (3.2mm) pull-in {.062” (1.6mm) with small cam} with a .156” (4.0mm) lifting ability. SECURITY & RELIABILITY: The pick-resistant design of this lock helps you exceed the load requirements for AAMA 1302.5 Forced Entry Resistance Test, the California Model Building Security Ordinance and ASTM-588 Forced Entry Test. LOGO OPTIONS: For that “personalized touch”, Truth’s TrimLine Check Rail Locks are capable of accepting your company’s name or logo. Truth’s unique custom print logo reproduction process is an attractive way of highlighting your company signature. For further details on where your company’s logo would appear, please refer to the following drawings. WARRANTY: Protected under the terms of the Truth Warranty for Window & Door Manufacturers and Authorized Distributors. Refer to Truth’s Terms & Conditions for further details. MATERIAL: High-pressure, corrosion-resistant, die-cast zinc. FINISH: Electrostatically applied, durable coatings that provide excellent resistance to chipping, scratching and corrosion while maintaining color stability for years in direct sunlight. Please refer to Truth’s Color Chart for examples of Truth’s most popular finish options. Truth also offers a wide range of decorative “plated” finishes - contact Truth for additional information on availability of these finishes on specific product lines. ORDERING INFORMATION: 1. Choose the TrimLine Cam Lock style desired (specify by part number). 2. Specify finish number. 3. Select mounting hardware (sold separately): For Keeper styles, refer to TrimLine(tm) Keeper catalog page for styles and part numbers. RECOMMENDED SCREWS: Types of screws required determined by material of profile used. Refer to drawings for complete information on screw type and quantity needed (sold separately). For additional information on screw selection - see Truth Tips. TRUTH TIPS: 1. A lock with pick-resistant alignment lugs should be used whenever possible. A lock without lugs should be chosen when the lugs cause interference with divided light grills or other window features. 2. A lock with a small cam should be used when the larger sweep radius of the .125” (3.2mm) pull-in cam causes interference with the glazing or other areas of the profile. A face-mounted keeper is usually required. 3. When two locks are used on one window, the placement of each lock, with respect to its keeper, becomes very critical to maintain a constant weatherseal on all sides of the window and to insure that each lock engages properly with its keeper. 4. For accurate hardware placement in vinyl or metal applications, pre-drilling of the window profile is recommended. 5. For vinyl window applications, mounting screws should pass through two PVC walls, or one PVC wall and one insert wall. For this reason, it may be necessary to use a longer screw than is recommended. 6. For metal window profiles, Truth recommends stainless steel machine screws. However, in most applications, stainless steel sheet metal screws will provide adequate holding power. INCLUDE TRUTH SPECS ON YOUR NEXT WINDOW PROJECT Window check rail locks shall be included which will increase both security and weather seal tightness. The lock must provide easy operation and positive locked feel (detent). Window check rail locks will be of internal cam design to provide .125” (3.2mm) of pull-in to aid in sealing the meeting rails. The lock and accompanying keeper will prevent mis-alignment during locking. The lock and keeper shall be constructed of high pressure zinc alloy die castings. Window locks shall be 17 series TrimLine, as manufactured by Truth Hardware, Owatonna, MN. 4
Page 1 and 2: Connecting Innovations In Hardware
Page 3 and 4: Sliding Window Hardware Catalog TAB
Page 5 and 6: DOUBLE HUNG SLIDER 700 SERIES LOCKS
Page 7 and 8: 700 SERIES LOCKS FIG. FIG. 3 3 700
Page 9 and 10: DOUBLE HUNG SLIDER 9200 SASH LOCK &
Page 11 and 12: 9200 SASH LOCK & KEEPERS 3b FIG. 2
Page 13 and 14: 9200 SASH LOCK & KEEPERS 3d FIG. 5
Page 15 and 16: 9200 SASH LOCK & KEEPERS 3f FIG. 9
Page 17 and 18: 9200 SASH LOCK & KEEPERS 3h FIG. 13
Page 19: 9200 SASH LOCK & KEEPERS 3j FIG. 17
Page 23 and 24: DOUBLE HUNG SLIDER 17 TRIMLINE CAM
Page 25 and 26: 17 TRIMLINE CAM LOCK KEEPERS FIG. 4
Page 27 and 28: DOUBLE HUNG SLIDER 9400 SASH LOCK &
Page 29 and 30: 9400 SASH LOCK & KEEPERS 6b FIG. 3
Page 31 and 32: DOUBLE HUNG SLIDER 17 ENTRYGARD® I
Page 33 and 34: DOUBLE HUNG SLIDER 17 ENTRYGARD® C
Page 35 and 36: 17 ENTRYGARD® CAM LOCK KEEPERS FIG
Page 37 and 38: DOUBLE HUNG SLIDER 17.04 SASH LOCK
Page 39 and 40: FIG. 3 C09417 KEEPER FIG. 4 41807 K
Page 41 and 42: DOUBLE HUNG SLIDER 9900 SASH LOCK 1
Page 43 and 44: 9900 SASH LOCK 10b
Page 45 and 46: DOUBLE HUNG SLIDER 9950 LOCK WITH C
Page 47 and 48: DOUBLEHUNG SLIDER 30590 CAM GARD
Page 49 and 50: DOUBLE HUNG SLIDER 17 RESTORATION H
Page 51 and 52: DOUBLE HUNG SLIDER 19 POSITIVE ACTI
Page 53 and 54: 19 POSITIVE ACTION LOCK (PAL SYSTEM
Page 59 and 60: DOUBLE HUNG SLIDER 19 FuSION SYSTEM
Page 61 and 62: 19 FuSION SYSTEM 15b F FIG. 1 FUSIO
Page 63 and 64: 19 FuSION SYSTEM 15d FIG. 4 FUSION
Page 65 and 66: 19 FuSION SYSTEM 15f FIG. 6 FUSION
Page 67 and 68: FIG. 9 FUSION KEEPER ASSEMBLY (FOR
Page 69 and 70: 19 FuSION SYSTEM 15j FIG. 11 FUSION
Page 71 and 72:
DOUBLE HUNG SLIDER 19 HARMONY SYSTE
Page 73 and 74:
19 HARMONY SYSTEM 15.1b FIG. 1 19.7
Page 75 and 76:
19 HARMONY SYSTEM 15.1d FIG. 5 19.7
Page 77 and 78:
19 HARMONY SYSTEM 15.1f FIG. 7 19.7
Page 79 and 80:
19 HARMONY SYSTEM 15.1h FIG. 12 456
Page 81 and 82:
19 HARMONY SYSTEM 15.1j FIG. 14 19.
Page 83 and 84:
19 HARMONY SYSTEM 15.1l FIG. 17 456
Page 85 and 86:
DOUBLE HUNG SLIDER TILT LATcHES Tru
Page 87 and 88:
FIG. 2 46.21.XX.001 TILT LATCH LEFT
Page 89 and 90:
TILT LATcHES FIG. 5 1038L TILT LATC
Page 91 and 92:
TILT LATcHES FIG. 9 46.13 TILT LATC
Page 93 and 94:
DOUBLE HUNG SLIDER SASH LIFTS Truth
Page 95 and 96:
18.10 SASH LIFTS 17b FIG. 3 18.16 S
Page 97 and 98:
DOUBLE HUNG SLIDER WINDOW ROLLERS T
Page 99 and 100:
DOUBLEHUNG SLIDER PIVOT BARS Trut
Page 101 and 102:
DOUBLEHUNG SLIDER MISCELLANEOUS T
show all

SASH LOCK - Truth Hardware

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?