SASH LOCK - Truth Hardware

More documents

Recommendations

Info

30590 CAM GARD LOCK FIG. 1 A30590402 LOCK 2.250 [57.2 mm] .780 [19.8 mm] 1.268 [32.2 mm] RIGHT HAND LEFT HAND A30590402 A30590403 .280 [7.1 mm] LEFT HAND SHOWN .650 [16.5 mm] CAM PULL-IN .080 RECOMMENDED SCREWS: (QTY 2) #6 PHILLIPS FLAT HEAD SCREWS (LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE) 3.250 [82.6 mm] .480 [12.2 mm] AVAILABLE KEEPERS C30628 C30643 A 0.56 0.617 B 0.04 0.04 C 0.5 FIG. 2 C30628.XX KEEPER 2.240 [56.9 mm] .260 [6.6 mm] .130 [3.3 mm] FIG. 3 C30643.XX KEEPER .375 2.240 [9.5 mm] [56.9 mm] .188 [4.8 mm] .530 [13.5 mm] .530 [13.5 mm] 2.875 [73.0 mm] AVAILABLE LOCKS 2.875 [73.0 mm] AVAILABLE LOCKS RECOMMENDED SCREWS: (QTY 2) #6 WITH A #5 HEAD PHILLIPS FLAT HEAD SCREW (LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE) A30590402 A30590403 RECOMMENDED SCREWS: (QTY 2) #6 PHILLIPS FLAT HEAD SCREW (LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE) A30590402 A30590403 12a 700 WEST BRIDGE STREET, OWATONNA, MN 55060 n 507.451.5620 800.866.7884 n TRUTH.COM
DOUBLE HUNG SLIDER 17 RESTORATION HARDWARE 13 When the window’s design or the home’s décor calls for that traditional touch, Truth’s Restoration Hardware is the answer. Designed and crafted to replicate the styling of window hardware from an earlier era, Truth has used today’s technology to create a hardware system that is both stylish and functional. APPLICATION AND DESIGN: Truth’s Restoration Lock comes equipped with the traditional open cam look, and is fitted with a durable plastic insert on the keeper to protect the surface of the cam during lock-up and to aid in its smooth operation. This open cam design also provides for a simple visual indicator that the system is locked. The traditional styling of the thumb lever on the lock is ergonomically simple to operate. The spring back design snaps the cam into the lock or un-locked position which reduces the potential for accidental marring of grilles. With a lower profile than many other lock and keeper configurations, Truth’s Restoration Lock system helps to minimize sight line interference. Utilizing standard mounting holes (2- 1/16") and setback (11/16") this lock and keeper are an easy retrofit to existing lock applications thereby reducing any additional manufacturing set-ups. Truth also offers a Restoration Sash Lift which has a traditional finger-pull look, and encourages the lifting of the window from bottom thereby putting less stress on the sash than would occur from pushing on the top rail. See Truth’s Sash Lift section for further technical information. WARRANTY: Protected under the terms of the Truth Warranty for Window & Door Manufacturers & Authorized Distributors. Refer to Truth’s Terms & Conditions for further details. MATERIAL: High-pressure, corrosion-resistant die-cast zinc. Molded plastic insert. FINISH: Electrostatically applied, durable coatings that provide excellent resistance to chipping, scratching and corrosion while maintaining color stability for years in direct sunlight. Please refer to Truth’s Color Chart for examples of Truth’s most popular finish options. Truth also offers a wide range of decorative “plated” finishes – contact Truth for additional information on availability of these finishes on specific product lines. ORDERING INFORMATION: 1. Order item #17.02 Restoration Lock. 2. Order item #12594.XX Restoration Keeper 3. Order item #18.16 Restoration Lift 4. Specify finish 5. Select screws (fasteners). Sold separately. RECOMMENDED SCREWS: Phillips flat head screws. Refer to drawings for additional specs. Length and thread type to be determined by profile. For further information on screw selection – see Truth Tips TRUTH TIPS: 1. When two locks are used on one window, the placement of each lock, with respect to its keeper becomes very critical to maintain a constant weather seal on all sides of the window and to insure that each lock engages properly with its keeper. 2. For accurate hardware placement in vinyl or metal applications, pre-drilling of the window profile is recommended. 3. For vinyl window applications, mounting screws should pass through two PVC walls, or one PVC wall and one insert wall. For this reason, it may be necessary to use a longer screw than is recommended. INCLUDE TRUTH SPECS ON YOUR NEXT WINDOW PROJECT Window check rail locks shall be included which increase both security and weather seal tightness. The lock must provide easy operation and positive locked feel (detent). Window check rail locks shall be of open cam design. Locks will be of #17 Series design as manufactured by Truth Hardware.
Page 1 and 2: Connecting Innovations In Hardware
Page 3 and 4: Sliding Window Hardware Catalog TAB
Page 5 and 6: DOUBLE HUNG SLIDER 700 SERIES LOCKS
Page 7 and 8: 700 SERIES LOCKS FIG. FIG. 3 3 700
Page 9 and 10: DOUBLE HUNG SLIDER 9200 SASH LOCK &
Page 11 and 12: 9200 SASH LOCK & KEEPERS 3b FIG. 2
Page 13 and 14: 9200 SASH LOCK & KEEPERS 3d FIG. 5
Page 15 and 16: 9200 SASH LOCK & KEEPERS 3f FIG. 9
Page 17 and 18: 9200 SASH LOCK & KEEPERS 3h FIG. 13
Page 19 and 20: 9200 SASH LOCK & KEEPERS 3j FIG. 17
Page 21 and 22: DOUBLE HUNG SLIDER 17 TRIMLINE CAM
Page 23 and 24: DOUBLE HUNG SLIDER 17 TRIMLINE CAM
Page 25 and 26: 17 TRIMLINE CAM LOCK KEEPERS FIG. 4
Page 27 and 28: DOUBLE HUNG SLIDER 9400 SASH LOCK &
Page 29 and 30: 9400 SASH LOCK & KEEPERS 6b FIG. 3
Page 31 and 32: DOUBLE HUNG SLIDER 17 ENTRYGARD® I
Page 33 and 34: DOUBLE HUNG SLIDER 17 ENTRYGARD® C
Page 35 and 36: 17 ENTRYGARD® CAM LOCK KEEPERS FIG
Page 37 and 38: DOUBLE HUNG SLIDER 17.04 SASH LOCK
Page 39 and 40: FIG. 3 C09417 KEEPER FIG. 4 41807 K
Page 41 and 42: DOUBLE HUNG SLIDER 9900 SASH LOCK 1
Page 43 and 44: 9900 SASH LOCK 10b
Page 45 and 46: DOUBLE HUNG SLIDER 9950 LOCK WITH C
Page 47: DOUBLEHUNG SLIDER 30590 CAM GARD
Page 51 and 52: DOUBLE HUNG SLIDER 19 POSITIVE ACTI
Page 53 and 54: 19 POSITIVE ACTION LOCK (PAL SYSTEM
Page 59 and 60: DOUBLE HUNG SLIDER 19 FuSION SYSTEM
Page 61 and 62: 19 FuSION SYSTEM 15b F FIG. 1 FUSIO
Page 63 and 64: 19 FuSION SYSTEM 15d FIG. 4 FUSION
Page 65 and 66: 19 FuSION SYSTEM 15f FIG. 6 FUSION
Page 67 and 68: FIG. 9 FUSION KEEPER ASSEMBLY (FOR
Page 69 and 70: 19 FuSION SYSTEM 15j FIG. 11 FUSION
Page 71 and 72: DOUBLE HUNG SLIDER 19 HARMONY SYSTE
Page 73 and 74: 19 HARMONY SYSTEM 15.1b FIG. 1 19.7
Page 75 and 76: 19 HARMONY SYSTEM 15.1d FIG. 5 19.7
Page 77 and 78: 19 HARMONY SYSTEM 15.1f FIG. 7 19.7
Page 79 and 80: 19 HARMONY SYSTEM 15.1h FIG. 12 456
Page 81 and 82: 19 HARMONY SYSTEM 15.1j FIG. 14 19.
Page 83 and 84: 19 HARMONY SYSTEM 15.1l FIG. 17 456
Page 85 and 86: DOUBLE HUNG SLIDER TILT LATcHES Tru
Page 87 and 88: FIG. 2 46.21.XX.001 TILT LATCH LEFT
Page 89 and 90: TILT LATcHES FIG. 5 1038L TILT LATC
Page 91 and 92: TILT LATcHES FIG. 9 46.13 TILT LATC
Page 93 and 94: DOUBLE HUNG SLIDER SASH LIFTS Truth
Page 95 and 96: 18.10 SASH LIFTS 17b FIG. 3 18.16 S
Page 97 and 98: DOUBLE HUNG SLIDER WINDOW ROLLERS T
Page 99 and 100:
DOUBLEHUNG SLIDER PIVOT BARS Trut
Page 101 and 102:
DOUBLEHUNG SLIDER MISCELLANEOUS T
show all

SASH LOCK - Truth Hardware

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?