TraumaCad Administrator's Guide 2.2 - Final.pdf - Voyant Health

48
Configuring the TraumaCad Server
TraumaCad Administrator’s Guide
NOTE:
This is a cross organizational configuration, meaning that all the
workstations are configured the same way without the ability to change the
default settings from the client side. Any selection made here affect all the
workstations and causes them to operate according to these settings.
• Client inactivity timeout: If TraumaCad client is open, but is not
currently being worked on (is dormant), a timeout occurs after the
designated period of time specified in this field and the software
closes down. It is important to note that all work performed on
the client up to the time of the timeout is lost without the ability
to restore it. This is a security feature.
• Fuji Integration Version [Optional]: This only applies if you are
working with a Fuji Synapse PACS system. (If you are using a
different PACS system, then leave the default value at version 3.2).
Due to various changes made in the Fuji integration services, you
must specify your Fuji Synapse version. Only version 3.1 and 3.2 are
supported. (The minor version, which is the third set of digits in a
version number, is not relevant.)
• Regex [Optional]: This option is specific to non-English,
Fuji-integrated systems. Consult the Orthocrat Global Support
Center before applying this setting if your server works with a
non-English, Fuji system.
5 Click Save Settings to save all these settings to the TraumaCad server
and a confirmation window is displayed.
If you have not been able to query/retrieve or commit back to the PACS
system and you have checked that the configuration on both sides is
correct, then please click the Restart Dicom Proxy button. This will restart
TraumaCad Server’s DICOM component.