QUALITY CONTROL MANUAL - Industrial Piping, Inc.

More documents

Recommendations

Info

Quality Control Manual Page 1 of 1 EXHIBIT E Revision 0 RECEIVING INSPECTION REPORT
Quality Control Manual Page 1 of 1 EXHIBIT F Revision 0 FABRICATION DIVISION 2794 Old Richburg Road Richburg, SC 29729 TELEPHONE 704/588-1100 FAX 800/789-3537 Website: www.goipi.com JOB RELEASE MEMO JOB NO.: W-2631 C&D Customer: Wittemann Date: September 25, 2006 Location: Taiwan Scope: (2) 12” Code Vessels Customer Contact: John Day Estimated Man-Hours: T & M Scope: Fabricate (2) pressure vessels per ASME Code Section VIII, Division I 2004 Edition A05 Addenda. Fabricate per the attached drawings. Schedule Required: All fabrication to be complete no later than October 31, 2006. Materials: Material for the vessels has been ordered and the majority is here now. Use only materials which have been marked for use on this job. Quality Requirements: See drawings for paint and quality requirements. NO RT is required on vessel per UW-11. All material must have Mill Test Reports with matching Heat numbers. Direct questions to Travis Ramsey File No. W-2631
Page 1 and 2: INDUSTRIAL PIPING, INC. 2794 OLD RI
Page 3 and 4: Quality Control Manual Page iii Ind
Page 5 and 6: Quality Control Manual Page 1 of 1
Page 42: Quality Control Manual Page 1 of 1

QUALITY CONTROL MANUAL - Industrial Piping, Inc.

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?