Manual PDF - Innova Pro

Using the Scan Tool
VIEWING ENHANCED DTCs
• The Diagnostic Trouble Code (DTC) and related code definition
are shown in the lower section of the LCD display.
I/M MONITOR STATUS icons are not displayed when
viewing enhanced DTCs.
In the case of long code definitions, or when viewing
Freeze Frame data, a small arrow is shown in the
upper/lower right-hand corner of the code display area
to indicate the presence of additional information. Use
the and buttons, as necessary, to view the
additional information.
• The Scan Tool will display a code only if
codes are present in the vehicle’s
computer memory. If no codes are
present, a “No Enhanced DTC’s are
presently stored in the vehicle’s
computer” is displayed. Press the
button to return to the Honda/Acura
Enhanced menu.
3. If more than one code was retrieved press the button, as
necessary, to display additional codes one at a time.
• Whenever the Scroll function is used to view additional codes,
the Scan Tool’s communication link with the vehicle’s computer
disconnects. To re-establish communication, press the
POWER/LINK button again.
4. When the last retrieved DTC has been displayed and the
button is pressed, the Scan Tool returns to the Honda/Acura
Enhanced menu.
• To view additional enhanced DTCs, repeat steps 1 through 4, above.
• To exit the enhanced mode, press the button. The Scan
Tool returns to the Main Menu.
Toyota/Lexus Enhanced DTCs
When the Scan Tool enters the “enhanced”
mode (and Toyota/Lexus is selected, if
prompted), the Toyota/Lexus Enhanced menu
displays. Depending on the protocol used to
communicate with your vehicle, the
Toyota/Lexus Enhanced menu provides
options to view:
• Current DTCs, History DTCs or Pending
DTCs
• Current DTCs, Historical DTCs or Readiness
DTCs
46 CarScan+OBD1