In-Sight 7000 Series Vision System Installation Manual - Automation ...

More documents

Recommendations

Info

Power and I/O Breakout Cable Specifications This Power and I/O Breakout cable provides access to an external power supply, the acquisition trigger input, generalpurpose inputs, high-speed outputs and RS-232 serial communications. The Power and I/O Breakout cable is not terminated. Table 3-8: Power and I/O Breakout Cable Pin-Out Pin# Signal Name Wire Color 1 IN 2 Yellow 2 IN 3 White/Yellow 3 HS OUT 2 Brown 4 HS OUT 3 White/Brown 5 RS-232 RECEIVE 1 Violet 6 INPUT COMMON White/Violet 7 +24VDC Red 8 GROUND Black 9 OUTPUT COMMON Green 10 TRIGGER Orange 11 HS OUT 0 Blue 12 RS-232 TRANSMIT 2 Grey Shell SHIELD Bare Wire Note: • Cables are sold separately. • Unused bare wires can be clipped short or tied back using a tie made of non-conductive material. Keep all bare wires separated from the +24VDC wire. 1 If hardware handshaking is required, an I/O module must be used. 2 If hardware handshaking is required, an I/O module must be used. 20
Specifications <strong>Vision</strong> <strong>System</strong> Dimensions Note: • All dimensions are in millimeters [inches] and are for reference purposes only. • All specifications may be changed without notice. Figure 3-11: M12 Configuration 21
Page 1: In-Sight ® 7000 Series Vision Syst
Page 5: Regulations/Conformity Note: For th
Page 9 and 10: Table of Contents Legal Notices Reg
Page 11: Introduction This manual describes
Page 14 and 15: Table 2-2: Vision System Indicators
Page 16 and 17: Mount the Vision System Use the mou
Page 18 and 19: Connect the Power and I/O Breakout
Page 20 and 21: Specifications Mounting M12 Configu
Page 22 and 23: General-Purpose Inputs The vision s
Page 24 and 25: High-Speed Outputs The vision syste
Page 26 and 27: RS-232 Receive and Transmit The vis
Page 28 and 29: Ethernet Cable Specifications The E
Page 32 and 33: 22 Figure 3-12: C-Mount Configurati
Page 35: Appendix A - Cleaning/Maintenance C
Page 38 and 39: Tip: The power supplies for the vis
Page 42: P/N 597-0138-01 Printed in the USA

In-Sight 7000 Series Vision System Installation Manual - Automation ...

Create successful ePaper yourself

Delete template?

Save as template?