Spray Nozzles Spray Control Spray Analysis Spray Fabrication

XT
Lubrication/Cooling/Strip Wash-Off
Dramatically Increase Cooling Efficiency with
our Extra-Thick (XT) VeeJet Nozzles
Using open passages, the XT VeeJet nozzle provides a wider flat footprint
– 30” (762 mm) – than other nozzles. This increased surface contact
results in better cooling efficiency. Plus, the compact size of the nozzle
enables positioning for greater spray overlap. The result? Maximum heat
removal, increased production and better steel quality.
The spray of the XT VeeJet nozzle is offset 20° to prevent spray interference.
Interchangeable with most spray tips used in many cooling operations, the XT
VeeJet nozzles offer an easy way to increase cooling efficiency without major
line retooling or expensive equipment upgrades. And, similar to our other dovetail
nozzles, the XT VeeJet is self-aligning and features a one-piece construction that
eliminates internal obstructions, prevents clogging and simplifies maintenance.
Specifications:
• Capacities range from 2 to 12 gpm at 40 psi (7.6 to 45.4 l/min at 3 bar)
• Spray angle options of 65° or 80°
• Brass or 303 stainless steel construction
• Weld and standard body connection options
Performance
*At the stated pressure in psi.
Spray Tip
No. 49784-
Capacity (Gallons per minute)*
20 40 60 80 100 150
XT___-___20 1.41 2.00 2.45 2.83 3.16 3.87
XT___-___30 2.12 3.00 3.67 4.25 4.74 5.80
XT___-___40 2.83 4.00 4.89 5.65 6.32 7.74
XT___-___50 3.53 5.00 6.12 7.07 7.90 9.68
XT___-80120 8.60 12.0 14.4 16.4 18.0 21.9
Spray Angle
Nozzle No.
49784-
Spray Angle
Degree
“A”
XT___-65___ 65
XT___-80___ 80
“B”
30
Ordering Info
XT VeeJet Spray Nozzle
49784 – XT – SS 65 40
39
Nozzle Material Spray Capacity
No. Code Angle No.