Spray Nozzles Spray Control Spray Analysis Spray Fabrication

Strip Wash-Off/Hot Strip Mill
High Impact Spot Spraying Solutions:
WashJet Spray Nozzles
WashJet high-pressure spray nozzles operate at pressures from 300 to 4000 psi
(20 to 275 bar) and feature a high impact solid stream (0°) or flat spray pattern
with spray angles of 5° to 65°. Ideal for spot cleaning or light descaling of billets,
blooms or rounds, WashJet nozzles use an internal guide vane to stabilize liquid
turbulence to provide maximum spray integrity and impact.
Milled flats parallel to the plane of the spray pattern provide a visual reference
for quick and easy spray alignment. Specialty hardened stainless steel construction
provides longer wear-life and flow control accuracy. Or, for maximum erosion
resistance, specify WashJet nozzles with tungsten carbide orifice inserts.
Specifications:
• Capacities: .1 to 3 gpm at 40 psi (.39 to 11.8 at 3 bar)
• Material – MEG WashJet nozzles: Specialty hardened stainless steel
• Material – MEG-SSTC WashJet nozzles: Stainless steel with tungsten carbide
orifice inserts
• Spray angles: 65°, 50°, 45°, 25°, 15° and 0°
• 1/8” to 1/4” inlet connections
Dimensions
Nozzle Type (Conn.) Inlet Conn. (in.) Length (in.)
Length
(mm)
Hex.
(in.)
Hex.
(mm)
Flats
(in.)
Flats
(mm)
Net Weight
(oz.)
Net Weight
(kg)
1/8 7/8 22 1/2 12.7 5/16 7.9 .61 .02
MEG (M)
29/32 flat 23 flat
1/4
9/16 14.3 13/32 10.3 .76 .02
1-1/64 solid 26 solid
Based on largest/heaviest version of each type.
Ordering Info
WashJet Spray Nozzle
1/4 MEG - 15 04
Inlet Nozzle Spray Capacity
Conn. Type Angle Size
58