Spray Nozzles Spray Control Spray Analysis Spray Fabrication
Spray Nozzles Spray Control Spray Analysis Spray Fabrication
Spray Nozzles Spray Control Spray Analysis Spray Fabrication
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Descaling/Hot Strip Mill<br />
DescaleJet ®<br />
Standard DescaleJet <strong>Nozzles</strong>: Ideal<br />
for Descaling Ingots, Slabs, Bars,<br />
Plates and More<br />
Several basic models of self-aligning DescaleJet nozzles are<br />
available for use in hot strip mills where spray heights of 6” to<br />
12” (152 mm to 305 mm) are required. Used after the roughing<br />
stands, these nozzles deliver a flat spray pattern with up to 50%<br />
more impact than conventional nozzles. An internal vane stabilizes<br />
the spray and enables higher impact to be achieved.<br />
Basic DescaleJet nozzles feature self-aligning spray tips. A stainless<br />
steel body and spray tip holder provides heavy outer protection<br />
from splash-back wear and flying debris. All working parts, including<br />
alignment elements, are positioned internally for maximum protection.<br />
Specifications:<br />
• Capacities: 15 to 52 gpm (56.8 to 196.8 l/min) at 2000 psi (138 bar)<br />
• Materials: Stainless steel with hardened stainless steel or tungsten<br />
carbide inserts<br />
• <strong>Spray</strong> angles: 15°, 18°, 25°, 32° and 40°<br />
• 1” inlet connections<br />
Dimensions – 26180 DescaleJet<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
Ordering Info<br />
26180 DescaleJet <strong>Spray</strong> Nozzle<br />
26180 – 1 + TC2530E<br />
Nozzle Cap Orifice<br />
Number 1 = Cap Insert Number<br />
2 = Strainer<br />
<br />
<br />
50