Spray Nozzles Spray Control Spray Analysis Spray Fabrication

Spangling/Cold Strip Mill
Air Atomizing Nozzles/
Spray Control
Hundreds of Air Atomizing Options for
Dozens of Cold Mill Operations
Air atomizing nozzles are among the most versatile of spray nozzle types with
many diverse uses in mills. Zinc dip, galvanizing, soft quenching and oiling are
just a few of the more common applications. Our line of air atomizing nozzles
is extensive with a wide choice of air and liquid inlet locations, built-in strainers
and check valves and multiple spray assemblies. Whether it be an application
where drop size control is critical as in the galvanizing line or where rapid
quenching is the goal, Spraying Systems Co. offers a wide variety of products
with different operating characteristics. Plus, we offer a wide variety of materials,
spray angles and flow rates. Various mounting options are also available.
Optimize the Performance of Your Automatic
Spray Nozzles with Integrated Spray Control
Powered by SprayLogic ® firmware and software, AutoJet ®
Spray Controllers accurately monitor and precisely adjust spray
variables. Our controllers can monitor and control multiple
spray nozzles or manifolds and include eight built-in regulation
modes for open-loop or closed-loop spray control.
Adding an AutoJet Spray Controller can improve the performance
and efficiency of air atomizing nozzles in a variety of
ways:
• Accurately control liquid, atomizing air and fan pressures for
proper drop size, flow rate and spray angle
• Increase cycle speed for automatic spray nozzles and
control spray timing more precisely
• Easily program system setpoint parameters
• Use Pulse Width Modulation to improve the efficiency of
electric spray nozzles
• Notify operators or shut down on specified faults
• Assist with troubleshooting spray system problems
• Integrate spray control with
existing mill control systems
66