Signetics Programmable Logic Devices - Al Kossow's Bitsavers

Signetics Programmable Logic Devices
Signetics Programmable Logic
Introduction
In the previous example, the two Boolean Logic
equations were broken into Product terms.
Each P-term was then programmed into the
P-tenn section of the PLA Program Table. This
was accomplished in the following manner:
Step 1
Select which Input pins 10 - 115 will correspond
to the input variables. In this case
A - G are the input variable names. 16 through
10 were selected to accept inputs A - G respectively.
TERM
INPUT(lm)
I1: =r=:I~~