PTI Bearing Catalog - Norfolkbearings.com

Metric Plummer Blocks
FSSNG-D 500-600 Series
4-Bolt Ductile Iron Housing
Split TSNG Seals for 500 or 600
Series will accommodate both metric
and inch shaft sizes. The TSNG Seal
can be replaced without moving the
shaft.
TS Seal with O-ring
(optional)
TAU Taconite Seal
(optional)
See SNG page for other dimensions.
(2-Bolt Optional)
Housing
Part No.
E M S Bolt
Rubber Seal
Part No.
SNG 500 Seal
Optional
Felt Seal
Part No.
Shaft
(mm)
Shaft
(in)
Part No.
SNG 600 Seal
FSSNG508-607D 34 160 11 M10 TSNA508G TSNC508 35 1-3/8 TSNA607G 30 1-3/16
FSSNG509D 34 160 11 M10 TSNA509G TSNC509 40 1-1/2 — — —
FSSNG510-608D 34 160 11 M10 TSNA510G TSNC510 45 1-11/16, 1-3/4 TSNA608G 35 1-3/8
FSSNG511-609D 40 200 14 M12 TSNA511G TSNC511 50 1-15/16, 2 TSNA609G 40 1-1/2
FSSNG512-610D 40 200 14 M12 TSNA512G TSNC512 55 2-3/16 TSNA610G 45 1-11/16, 1-3/4
FSSNG513-611D 48 220 14 M12 TSNA513G TSNC513 60 2-1/4 TSNA611G 50 1-15/16, 2
FSSNG515-612D 48 220 14 M12 TSNA515G TSNC515 65 2-7/16, 2-1/2 TSNA612G 55 2-3/16
FSSNG516-613D 52 252 18 M16 TSNA516G TSNC516 70 2-11/16, 2-3/4 TSNA613G 60 2-1/4
FSSNG517D 52 252 18 M16 TSNA517G TSNC517 75 2-15/16, 3 — — —
FSSNG518-615D 58 280 18 M16 TSNA518G TSNC518 80 3-3/16 TSNA615G 65 2-3/16, 2-1/2
FSSNG519-616D 58 280 18 M16 TSNA519G TSNC519 85 3-3/8 TSNA616G 70 2-11/16, 2-3/4
FSSNG520-617D 66 300 18 M16 TSNA520G TSNC520 90 3-7/16, 3-1/2 TSNA617G 75 2-15/16, 3
FSSNG522-619D 74 320 18 M16 TSNA522G TSNC522 100 3-15/16, 4 TSNA619G 85 3-3/8
FSSNG524-620D 74 330 18 M16 TSNA524G TSNC524 110 4-3/16, 4-1/4 TSNA620G 90 3-7/16, 3-1/2
FSSNG526D 80 370 22 M20 TSNA526G TSNC526 115 4-7/16, 4-1/2
FSSNG528D 92 400 26 M24 TSNA528G TSNC528 125 4-15/16, 5
FSSNG530D 100 430 26 M24 TSNA530G TSNC530 135 5-3/16, 5-1/4
FSSNG532D 100 450 26 M24 TSNA532G TSNC532 140 5-7/16, 5-1/2
Note: The TSNG is an all rubber premium design seal and will accommodate a variety of shaft sizes - both inch and metric. 4-halves are
required for 1 block and are included in each seal kit. The design allows seal replacement without removing the shaft.
Shaft
(mm)
Shaft
(in)
201 P.T. International Corp.