Stepper drives Servostep drives Controllers

SW
SlimLine drives
programmables
eePLC
User Quick
Configuration
Interface
Process
Realtime
Module
PLC
ATOMIC
User
Interface
(I/O, HMI)
Motion
Module
Main features
• Integrated PLC
• Multiple Control Modalities
• Programmable with eePLC Studio
• Integrated process modules: Labelling and electronic CAM.
• Equipped with Advanced Security features:
√ tested for direct unit installation
√ built-in watchdog function
√ malfunctions monitoring and handling
√ separated power supply for logic and power
√ buffering and on the field management of errors
• Main advantages of the drives:
√ low motor vibration
√ low mechanical noise
√ low heat production
√ security protections
√ AC/DC power supply
√ compact size
√ no resonance
√ high reliability
√ high speed and torque
√ wide power range
Description
The SW1 with c0490 and c1490 firmware is a series of Full Digital drives programmable
by means of IDE eePLC (Integrated Development Environment) and
can also function in ‘standalone’ mode’ allowing a maximal application customization.
The series with c1490 firmware integrates also the easy applicable module
for full electronic CAM management.
This functionality is often requested
0 6 1 - 0 0 and c leads 0 3 to 0 0significant savings of
mechanical references. Additionally
to the driving Software stepper and firmware motors with
configuration code
less noise, less heating, smooth motions
and versions higher and options performances code at high
Hardware
Axles number speed, the SW1 drives offer thanks
I/O configuration code
to the f 4 d 2 firmware an exceptional
reliability combined with mechanical
N = No fieldbus · C = CANbus
compactness
· P = Profibus
against a competitive
rrent in Amps *10
cost. Designed for the control of 2 or
DC power supply
0 = No serial interface · 3 = RS232/ RS422
r supply
power supply inputs for logic and power
controlled drives
Housing size
nly accessory device
ne axis drive
er supply
er supply
r supply with integrated transformer
le drive
4 phase hybrid stepper motors, a wide
Voltage range code
range of stepper drives with a different
power level are available to combine
with motor series from 1.7” to
4.2”. Thanks to the wizard present in
the eePLC development environment,
it’s simple to design many machine types such as: labellers, X-Y-Z tables, dosing
0 v A 1 1 4 c 0 2 0 1
systems, laser applications etc. The drives are suitable to be used in applications
that require versatility, accuracy and cost containment.
Software and firmware
configuration code
Hardware versions and options code
SW1 A 9 1 6 0 N 3 6 1 - 0 0 c 0 4 9 0
A = AC power supply · D = DC power supply
SW1= Wall mounting software controlled drives
SD M W A 1 8 0 v A 1 3 3 c 0 4 9 9
L = Clock & Direction drive
M = Fieldbus/Programmable drive
A = accessory device
28
SD = SD Enhanced drives
N = No fieldbus · C = CANbus · P = Profibus
Max current in Amps *10
Axles number
I/O configuration code
0 = No serial interface · 3 = RS232/ RS422
0 = Single power supply
1 = Separated power supply inputs for logic and power
Housing size
0 = Only accessory device
1 = One axis drive
A = AC power supply
D = DC power supply
T = AC power supply with integrated transformer
W = Wall mounting
Software and firmware
configuration code
Hardware versions and options code
Software and firmware
configuration code
Hardware versions and options code