Tailift Sales Manual - Worldwide Forklifts

11. Boxcar loading or unloading (if not applicable, go to item 12)
11a. Minimum width________________ of loading doors.
11b. Clearance between height of door and top of dockplate (always check down height of upright in travel
position to insure clearance.)
Height
= ____________ mm
=_____________in
11c. If the product will double stacked in the boxcar, complete the following:
If product is double
stacked. Enter
height of surface on
which highest load
rests
Fork deflection
Tire wear and
crush
lift-off
clearance
Pallet thickness where
applicable
(see items 3d, pg 24)
+ 25mm + 25 mm + 50 mm + mm = mm
+ 1” + 1” + 2” + in = in
= ____________ mm
Clearance
=_____________in
Note: * Once you determine double stack clearance data, make sure upright and load backrest extension
selection does not make contact with boxcar roof or door in loading and unloading situation.
*Check overhead guard height.
11d. Describe surface of dockplate:
44
Tailift Sales Manual 2005