Technical Presentation - Misati.com

More documents

Recommendations

Info

3.13. Fixing the (static) Gripper Fingers SPECIAL Other Clamps (2) (4) (3) (1) Fastening of movable gripper fingers to the arm of the clamp is made with threaded screws (1), passing screws (2) and upper (3) or lower (4) centring guide bushings. In this way, it’s easier to assemble, center and interchange gripper fingers. www.misati.com
3.14. Pneumatic Installation without Flow Regulators Other Clamps Without Flow Regulators With standard gripper fingers, Misati clamps do not need any flow regulators: the cost of the pneumatic installation is reduced. www.misati.com
Page 1 and 2: Technical Presentation FASTENING CL
Page 3 and 4: WHAT WE DO Misati clamps have been
Page 5 and 6: 1. STANDARD COMPONENTS MISATI has a
Page 7 and 8: 3. UNIQUE ADVANTAGES OF THE MINICLA
Page 9 and 10: 3.1. Higher Holding Force If we com
Page 11 and 12: 3.1. Higher Holding Force If we com
Page 13 and 14: 3.2. Smaller Size If we compare two
Page 15 and 16: 3.3. Standard Gripper Fingers Other
Page 17 and 18: 3.4. Study of Special Gripper Finge
Page 19 and 20: 3.6. Reduced Air Consumption Other
Page 21 and 22: 3.8. Rolling System Rolling System
Page 23 and 24: 3.10. Monoblock Body of Steel •Th
Page 25 and 26: 3.12. Positioning the Fastening Cla
Page 27: 3.13. Fixing the Gripper Fingers (o
Page 31 and 32: 3.16. Air Tightness of the Piston M
Page 33 and 34: 3.18. Guarantee We check air tightn
Page 35 and 36: 5. EXAMPLES OF APPLICATION www.misa
Page 37 and 38: 6. SERVICE Apart from a high-qualit

Technical Presentation - Misati.com

Create successful ePaper yourself

Delete template?

Save as template?