PROFIBUS-DP Option board SV-iS5,iP5A,iV5 - Ana-Digi Systems

Address NO. Description Default Maximum Minimum Unit
9628 COM-40 Input Num 2 8 0
9629 COM-41 Input 1 0005 FFFF 0000 HEX
962A COM-42 Input 2 0006 FFFF 0000 HEX
962B COM-43 Input 3 0000 FFFF 0000 HEX
962C COM-44 Input 4 0000 FFFF 0000 HEX
962D COM-45 Input 5 0000 FFFF 0000 HEX
962F COM-46 Input 6 0000 FFFF 0000 HEX
9630 COM-47 Input 7 0000 FFFF 0000 HEX
9631 COM-48 Input 8 0000 FFFF 0000 HEX
9643 COM-67 Comm Update 0 1 0
COM-01 [Opt B/D]
• Indicates Option boards installed. This value is automatically set when the boards are installed.
COM-02 [ Opt Mode ]
• Determines whether Run/Stop/Reference Frequency is set via Communication.
Value Display Description
0 None Disabled
1 Command Run/Stop setting via Communication
2 Freq Frequency setting via Communication
3 Cmd + Freq Run/Stop/Reference Frequency via Communication
COM-03 [ Opt Version ]
• Displays version of Option Board.
COM-20 [ Profi MAC ID ]
• Sets MAC ID of profibus. The MAC ID must have a unique value in network.
COM-30 [ Output Num ]
• Sets the number of Read area address only.
• Arrange COM #31~38 for using and set 1 to 8
COM-40 [ Input Num ]
• Sets the number of Write area address only.
• Arrange COM #41~48 for using and set 1 to 8
COM-67 [ Comm Update ]
• In case of changing parameter concerned with communication, the changing contents use as
updating.
Address No Description Factory default Setting range
945C I/O #92
0 :None(Keep RUN)
Driving method when lost
0 (None) 1 :Free Run/ Stop
Communication Cmd
2 :Decel Stop
945D I/O #93
Decision time of
Communication Cmd lost
1.0s 1.0~120.0s
• In case that COM #02 1(Command) ~ 3 (Cmd + Freq), it drives by setting value of I/O #48 during
the time of I/O #49 while lost communication command.