Bios Integrator 110 User Manual - Mesa Labs

More documents

Recommendations

Info

DB25 Pin DesignationConfigure your MFC/MFM cable as the connection table below.Pin No. Description Wire Color1 Power Ground Black2 N/C3 Signal Ground White4 + 15V_1.7A, MFC /MFM Power Red5 GND2 Brown6 N/C7 N/C8 N/C9 N/C10 N/C11 N/C12 Signal Voltage from MFC/MFM Yellow13 N/C14 N/C15 Signal Voltage to MFC Orange16 N/C17 N/C18 Signal Current to MFC Green19 N/C20 N/C21 N/C22 Signal Current from MFC/MFM Blue23 -15V_1.7A, MFC/MFM Power Purple24 N/C25 N/CN/C = no connectionSpecial Notes:A. + 15 VDC Supply Voltage• Positive/+15 V, pin 4• Negative/ Power ground, pin 1B. – 15 VDC Supply Voltage• Negative/-15 V,pin 23• Positive/ Power ground, pin 1(jumper pin 1 to pin 5)C. 30 VDC Supply Voltage• Positive/30 V, Pin 5 (jumper pin 4 to pin 23)• Negative, pin 1The jumpers for – 15 V/ 30 V are not connectedat the Integrator side. Make connection at theMFC/MFM sideD. Signal Voltage from MFC/MFM and SignalVoltage to MFC are 0-5VDC or 1-5 VDCE. Signal Current from MFC/MFM and SignalCurrent to MFC are 0 – 20 miliAmp DCor 4-20 miliAmp DCF. Signal ground and power ground areconnected at the Integrator side.G. N/C implies No ConnectionIntegrator 110 SpecificationsInputPower:90-264 VAC, 47-53 Hz.Operating Temperature: 0-50°CStorage Temperature: -20 - 85°CCommunication Ports: 9-pin D-Sub (RS232)MFC Electrical Connection: 25-pin D-SubMFM Electrical Connection: 25-pin D-SubOptional ValveElectrical Connection:9-pin D-SubMFC/MFM:4-20 ma, 0-20 ma,1-5 V or 0-5 VOutputPower Supply:Current:Resolution:Uncertainty:Voltage:Resolution:Uncertainty:+/- 15 VDC or 30 VDC4-20 ma, 0-20 ma0.4 micro-amp.015% Full Scale1-5 V, 0-5 V0.1 mVDC.015% FS13
Limited WarrantyThe Bios Integrator 110 is warranted to the original end user to be free from defects in materials and workmanship under normal use and servicefor a period of one year from the date of purchase as shown on the purchaser’s receipt. If your Integrator 110 was purchased from an authorizedreseller, a copy of an invoice or packing slip showing the date of purchase may be required to obtain warranty service.The obligation of Bios International Corporation under this warranty shall be limited to repair or replacement (at our option), during the warrantyperiod, of any part that proves defective in material or workmanship under normal use and service, provided the product is returned to BiosInternational Corporation, transportation charges prepaid.Notwithstanding the foregoing, Bios International Corporation shall have no liability to repair or replace any Bios International Corporation product:1. That has been damaged following sale, including but not limited to damage resulting from improper electrical voltages or currents,defacement, misuse, abuse, neglect, accident, fire, flood, terrorism, act of God or use in violation of the instructions furnished by BiosInternational Corporation;2. When the serial number has been altered or removed; or,3. That has been repaired, altered or maintained by any person or party other than Bios International Corporation’s own service facility ora Bios authorized service center, should one be established.This warranty is in lieu of all other warranties, and all other obligations or liabilities arising as a result of any defect or deficiency of the product,whether in contract or in tort or otherwise. All other warranties, expressed or implied, including any implied warranties of merchantability andfitness for a particular purpose, are specifically excluded.In no event shall Bios be liable for any special, incidental or consequential damages for breach of this or any other warranty,express or implied, whatsoever.Bios International Corporation10 Park PlaceButler, NJ, USA 07405Phone: 973.492.8400Toll Free: 800.663.4977Fax: 973.492.8270Email: sales@biosint.comweb: www.biosint.com© 2011 Bios International Corporation MK01-107 Rev E14
Page 1 and 2: Bios Integrator 110User Manual
Page 3 and 4: IntroductionCongratulations! You’
Page 5 and 6: The rear panel is more complex. It
Page 7 and 8: Compare MFC and DryCal: Operation T
Page 9 and 10: Via an External DeviceGas Supply Ex
Page 11 and 12: TroubleshootingIf you should encoun
Page 13: Make a MFC/MFM CableTwo MFC/MFM cab

Bios Integrator 110 User Manual - Mesa Labs

Create successful ePaper yourself

Delete template?

Save as template?