Glas Col 2007 - Lasalle Scientific Inc.

Shakers - HoldersSEPARATORY FUNNEL HOLDER (1000 ml & larger)The separatory funnel holder is designed toallow 1- or 2-liter separatory funnels to beheld in the positions necessary for sampleprocessing, but with minimum handling offragile funnels. From the upright, or fill,position the funnel may be rotated to the 45°or 60° position for shaking and then returnedto the upright position for the addition ofmaterials or extracting. The flask mayremain in the holder during the entire cycle.This holder requires the use of the UniversalMounting Platform (099A BT6000).HEATINGCatalogNumber Description DimensionsProductWeight(in)(lbs)099A BT2000S 2-liter separatory funnel holder 12.50”h x 9.50”w x 5.50”d 3.2(099A BT6000 required)099A BT1000S 1-liter separatory funnel holder 11.25”h x 9.50”w x 5.50”d 3.2(099A BT6000 required)R80 258 Up to 1 liter stopper retainer 0.5R80 255 2 liter stopper retainer 0.5When using standard funnels with glass, plastic or PTFE stoppers, our stopper retainer is required.SHAKERSERLENMEYER FLASK HOLDERThis flask holder lets you shake one to fourErlenmeyer flasks at a time. It will workwith uncapped flasks (for gentleshaking), or you can close them with screwcaps or tapered stoppers. An elastic bandautomatically holds the stoppers in place.Maximum of two flask holders can beshaken at once. A locking knob securesholder in optimum positions for both loadingflasks and for effective shaking. Whilemounted on shaker, the holder can be rotated180°.Each holder adjusts to accommodate three500 ml flasks or four 125 or 250 ml flasks.A combination of flasks is possible, as well.CatalogNumber Description DimensionsProductWeight(in)(lbs)099A EF521 Erlenmeyer flask holder 8.00”h x 12.75”w x 4.50”d 5.3FAT-EXTRACTION TUBE HOLDERThis tube holder lets you use the Bench-TopShaker for Mojonnier fat extraction. Eachholder accepts up to four flasks, 37 mm indiameter.Maximum of two holders can be shaken atone time. The load max of up to fivepounds (2.27 kg) need not be balanced.Unstoppered flasks may be shaken vertically.For horizontal shaking, flasks should bestoppered and stoppers held with built-inrestrainers.CatalogNumber Description DimensionsProductWeight(in)(lbs)099A MFG3 Fat-extraction tube holder 8.75”h x 13.00”w x 4.50”d 2.048