Glas Col 2007 - Lasalle Scientific Inc.

Stirrers - AccessoriesPROPELLERSCatalog Shaft Shaft Max. ProductNumber Description Length Length Vessel Weight(in) (mm) Size (in) (lbs)099D A100103 Stainless-steel, 4-bladed propeller, 9.00 229 4.0 .2099D A1001041.5"(38 mm) dia. on 1/4"(6.4 mm) dia.shaft. For general purpose mixing 12.00 305 4.0 .2099D A100105 applications.18.00 457 4.0 .3099D A130153 Stainless-steel, 4-bladed propeller, 9.00 229 5.5 .22"(50.8 mm) dia. on 1/4"(6.4 mm) dia.099D A130154 shaft. For general purpose mixing 12.00 306 5.5 .2099D A130155 applications.18.00 457 5.5 .3099D A210107 Stainless-steel, 3-bladed propeller, 1.5"(38 8.75 222 4.0 .2mm) dia. on 5/16"(7.9 mm) dia. shaft. For099D A210119 general purpose mixing applications. 12.00 305 4.0 .3099D A210121Blades can be bent to desired pitch.18.00 457 4.0 .4099D A260106Heavy-duty stainless-steel, 3-bladed propeller,6"(152 mm) dia. on 1/2"(12.7 mm)dia. shaft. High viscosity impeller for hardto-mixsolutions.12.00 305 12.00 .9A260106A210109A130154PADDLESCatalog Shaft Shaft Max. ProductNumber Description Length Length Vessel Weight(in) (mm) Size (in) (lbs)099D A210106 Stainless-steel, 3-bladed paddle,8.75 222 8.0 .3099D A2101092.5"(63.5 mm) dia. on 5/16"(7.9 mm)dia. shaft. High efficiency paddle for 12.00 305 8.0 .4099D A210120 viscous liquids or semi-solids.18.00 457 8.0 .5099D A219106 A210106 paddle with PTFE coating. 8.75 222 8.0 .3A210107A100103STIRRERSFLEXIBLE SHAFTS60CatalogProductNumber Description Length Weight(in) (mm) (lbs)099D A210312 5/16" (8 mm) shaft end/ 5/16" end fitting, clockwise direction 36 914 1.3099D A260375 3/8" (9.5 mm) shaft end/ 5/16" end fitting, clockwise direction 36 914 1.3099D A260500 1/2" (12.78 mm) shaft end/ 5/16" end fitting, clockwise direction 36 914 1.3099D A260625 5/8" (15.9 mm) shaft end/ 5/16" end fitting, clockwise direction 36 914 1.3GLASS & PTFE STIRRING ASSEMBLIESGlas-Col’s glass and PTFE stirring assembliesare designed for overheadagitation in air-tight systems with single- ormultiple-neck flasks. They also reduce thepossibility of sample contamination and arewell suited for agitating corrosive and causticsamples. The glass stirring rod is precisionground and polished to reduce abrasion tothe sealing surface of the PTFE bearing,thereby allowing a vacuum-tight seal. Eachstirring rod includes a PTFE nut and bolt.Each Teflon ® bearing consists of a threadedCatalogNumber DescriptionMinimumJoint SizeProductWeight(lbs)099D GS100 Stirring shaft w/PTFE nut and bolt, 445 mm, 10mm O.D. .4099D GS110 Stirring shaft w/PTFE nut and bolt, 515 mm, 10mm O.D. .4099D GS010 Stirring bearing, PTFE, 10 mm diameter. 24/40 .3099D GS015 Stirring bearing, PTFE, 10 mm diameter. 29/42 .3099D GS020 Stirring bearing, PTFE, 10 mm diameter. 45/50 .3099D GS210 Stirring blade, PTFE 100-500 ml, 19 x 48 mm. 24/40 .1099D GS220 Stirring blade, PTFE 250-500 ml, 19 x 60 mm. 24/40 .1099D GS230 Stirring blade, PTFE 500 ml-1 L, 19 x 76 mm. 24/40 .1099D GS240 Stirring blade, PTFE 2-3 L, 24 x 110 mm. 29/42 .1099D GS250 Stirring blade, PTFE 5-12 L, 24 x 130 mm. 29/42 .1099D GS005 PTFE nut and bolt replacement set. .1099D GS300 Flex-Coupling for 10 mm O.D. glass shaft. Fits 5/16” motor shaft. .5GS300glass adapter, a saddleO-ring, a body bushing with acompression and locking nut,and a precision PTFE innergearing. PTFE stirring bladesrotate to permit easy insertioninto a flask. The Flex-Coupling permits the use of theglass stirring rod with a motordrive. The 3" epoxy-coatedspring compensates formisalignment, reduces thechance for breakage, andeliminates the need for specialadapters.GS100