Glas Col 2007 - Lasalle Scientific Inc.

Shakers - HoldersTEST TUBE RACK HOLDERThe test tube rack holder lets you shake oneor two entire racks of test tubes at once.Does double duty as a holder for bottles,Erlenmeyer flask, or other stopperedcontainers.Racks are held in place by a restrainingcover. This cover automatically releases andremains captive when retaining nuts areloosened for rack insertion or removal.Existing racks up to 12" x 5" (30.5 x 12.7cm) may be used with capped or stopperedtubes from 75 to 200 mm long.CatalogNumber Description DimensionsProductWeight(in)(lbs)099A TR700 Test tube rack holder 11.50”h x 13.25”w x 6.75”d 3.2CENTRIFUGE TUBE HOLDERThe centrifuge tube holder allows shakingvertically to let gases escape, or horizontallywith stoppers secured by a plate. Each holderaccommodates up to eight tubes.Maximum of three holders can be shaken atone time. The total load may be up to fivepounds (2.27 kg) and need not be balanced.If sizes other than those listed in the tableare needed, call us with your requirements.CatalogNumber Description DimensionsProductWeight(in)(lbs)099A SR815 15 ml glass centrifuge tubes 9.00”h x 6.50”w x 4.50”d 1.3Test tubes up to 16 mm dia.126-160 mm long (stoppered)099A SR850 50 ml glass centrifuge tubes 9.00”h x 6.50”w x 4.50”d 2.1Test tubes up to 28 mm dia.140-180 mm long (stoppered)SHAKERSUNIVERSAL MOUNTING PLATFORMThe Universal Mounting Platform isrequired for mounting Series BT glasswareholders. It also provides a horizontal surfacefor the easy attachment of a wide variety ofvessels that need to be shaken.The Universal Mounting Platform is setconveniently on top of the shaker head andis held securely with three hand-tightenedlocking knobs. The Series BT holders alsoinstall quickly atop the platform throughpre-located mounting holes. Two lockingknobs secure each holder in place. Theplatform accepts two holders.CatalogNumber DescriptionProductWeight(lbs)099A BT6000 Universal mounting platform 4.0LARGE-FINGER CLAMPLarge-finger clamps are available for usewith the Bench-Top Shaker. They can holdvarious types of glassware up to 2-1/4"(57 mm) in diameter. The clamps may alsobe adjusted to hold glassware at the mosteffective shaking angle. Sold individually.CatalogNumber DescriptionProductWeight(lbs)R96 344 Large-finger clamp, each 1.049