Advantage GPX 33 - Paint Sprayers, HVLP Sprayers, Powered Rollers

SprayingTroubleshooting -123Clean the SprayGun FilterSPRAYPRIMEStartYou will need:• Wrench• Warm, soapy water for latex material• Mineral spirits for oil based materials• Replacement spray gun filter (if necessary)(a)important: Never clean the filter bypoking it with a sharp object.1. Peform the PressureRelief Procedure, page 7.2. Pull trigger guardfrom filter housing.3. Tighten the wrench over thewrench flats (a). Unscrew thefilter housing using a wrench.Note: You DO NOT need toremove the spray hose from the gunto clean the filter.45674. Remove the filter from thehousing. Clean with appropriatecleaning solution (warm, soapywater for latex materials; mineralspirits for oil-based materials).5. Inspect the filter fordamage. Replace if anyholes or tears are found.6. Replace cleaned filter, taperedend first, into the gun housing.Note: It is important to placetapered end first to ensure propersprayer operation.7. Reassemble the spray gun.13English