Advantage GPX 33 - Paint Sprayers, HVLP Sprayers, Powered Rollers

Short TermStorageShutdown1SPRAYPRIME23StartYou will need:• Water• Plastic bag or bucket• Rags• Stir stickORThis procedure should be used when takinga short term break or when ending yourproject for the day. If your break is longerthan 16 hours follow Cleanup instructions,page 16.Instructions are for latexmaterials onlyNote: If using oil based material followinstructions for Cleanup on page 16.1. Peform the Pressure ReliefProcedure, page 7.Startup12. Place spray gun in plasticbag or immerse into bucket ofwater.23. Pour 1/2 cup water slowly onthe top of the paint to preventthe paint from drying.Place the entire sprayingsystem out of the sun.3Page 91. Remove the spray gun fromthe plastic bag or the water.2. If water was added duringshut down, stir water intomaterial with the stir stick.3. Follow Getting Material toFlow instructions, page 9.15English