Advantage GPX 33 - Paint Sprayers, HVLP Sprayers, Powered Rollers

2. LoadMaterial1 2 3(a)StartYou will need:• The material you plan to spray• Flat blade screwdriver• Piston Lube• Waste bucket1. Remove AutoOiler cap with aflat blade screwdriver.Squirt Piston Lube into theAutoOiler. Replace cap.2. Push AutoOiler button 2-5 timesto lubricate the fluid section.Press button 2-3 times beforeevery use. Be sure to checkreservoir level (a) and refill asnecessary.4 56 7 83. Fully depress the Sureflo valveto make sure the inlet ball isfree.(a)SPRAYPRIME(b)4. Place a full containerof spraying materialunderneath the suctiontube (a).Hold the return tube into awaste container (b).5. Turn the PRIME/SPRAYknob to PRIME.6. Attach the suppliedgrounding wire to agrounded object.Start the engine (seedirections on page 4).7. Increase the pressure tomaximum (+).Allow pump to run untilyou see spray materialflowing from the returntube.8. Shut the engine off. Placereturn tube back intomaterial container and clipreturn tube and suction tubetogether.English8