c a t a l o g u e 1 0 / 1 1 catalogue - Sagola

Automatic Spray Guns | V4 | V5 HVLP | V6 EPA | V7/ Mix | Mini V | V3 | 450 A HVLP |4200 A EPA | 4041 | 4041 Mix | 4098 | PSAA 108 |V4 and V5 HVLPCatalogue 10/11INDUSTRIALSup. & Hdwr.Automaticspray guns123Robot VersionStardard AbravisesModel .V4High production conventional spray gun.Maximum speed of application.Incorporates double fan regulator andproduct regulator.Allows working with highpaint flows.In the standard version, the nozzle and the needleare made of stainless steel.Application SectorsStainless steel head versions forMetal Industry - Plastic Industry - Automotivecorrosive products and tungstennozzles for abrasives* See CODES on page 172Applications> For tasks requiring a high opening and closurerate. Ideal to be used with robots and specialmachinery.Industry - CeramicsTECHNICAL DETAILS> Dimensions: 164 cm x 45 cm x 104 mm.> Versions for highly corrosive or abrasive products> Weight: 785 g.(with tungsten carbide needle and nozzle).> Air consumption: 350 - 400 L/min.> Special for high speed and top quality finishes.Robot VersionStandard VersionV5This is the ideal tool where very high application speedMaximum reduction in productconsumption and mistalong with significant reduction of product consumptionare required. Spray mist, pollution, dirt and noise are allgreatly reduced, thus improving work conditions.> For tasks where it is necessary to reduce mistand improve work conditions.> Achieves a drastic reduction in productHigh speed applicationStainless steel head versions forcorrosive products and tungstennozzles for abrasives* See CODES on page 172The high production spray gun incorporates adouble spray pattern regulator, product regulatorand stainless steel nozzle and needle in the standardversion.Applicationsconsumption.Application SectorsFurniture Industry - Automotive Industry - PlasticsIndustry - Ceramics - Textiles - StainsTECHNICAL DETAILSwww.sagola.com> For tasks requiring a high opening and closure> Spray pressure at aircap: 0.68 bar.rate. Ideal to be used with robots and special> Dimensions: 164 cm x 45 cm x 104 mm.machinery.> Weight: 785 g.> Versions for highly corrosive or abrasive products> Air consumption: 500 - 600 L/min.(with tungsten carbide needle and nozzle).169