c a t a l o g u e 1 0 / 1 1 catalogue - Sagola

Industrial Trolleys and Mobile Racks | Davelju W-Type X | B590 2/2 | R600 Type X |B770 2/0 | R900 Type X | Octopus D1 | Octopus D2 |PresentationCatalogue 10/11INDUSTRIALSup. & Hdwr.Trolleys and Racks123Practical, versatile and robustequipment: efficient work.New standards ofefficiency and versatility.Advantages of the range1. Easy use of the detachable shelves. Lift, adjustand fit them in the required position.2. Easy-to-use bars. Simply loosen the Allen screwand remove the bar.3. Greater length of the transport bars. Thetransport bars can be extended by means ofsliding bars(accessory). The mobile racks can beequipped with sliding bars up to 1,100 mm inlength.4. Two types of chassis. Telescopic chassis ("T"type), easily adapted to be used on both sides. Thestructure is extended backward and the shelves areinserted from the rear. H type chassis, for both sidefrequent use.5. Change of the gap between levels. Loosening anAllen screw allows the bars to be detached.6. Loading by groups. Short parts can be placedone beside the other on the same level.7. Double-sided use = double efficiency.The detachable shelves can be insertedinto the grooves (47 mm.) of thelongitudinal bar.8. Length always adjustable. Especially for parts ofthe same length (eg. light doors over steel bolts).A maximum rack length of 3,200 mm. allowsloading of parts up to a maximum length of5 metres.9. Adaptable and easy to use. The mobile rack canbe adjusted to the required length in seconds byfastening two screws. When length is adjusted toless than 600 mm., the risk of capsizing must bekept in mind.10. Special lengths. Adaptable according todemand. SAGOLA mobile racks, in addition to thestandard length of 1,500 mm., are available in2,100 mm., 2,350 mm. and 2,780 mm.www.sagola.com245