c a t a l o g u e 1 0 / 1 1 catalogue - Sagola

Filtration Systems Inside booth air filtration | 5300 | 5300+ | 5200 | 5100 | 5050 | 5000 |Outside booth air filtration | 479 Plus | 970 Plus | 439 Plus | 430 Plus | 437 Plus |Catalogue 10/11BODYSHOP 1PresentationFiltrationSystem23MAXIMUM QUALITYin air filtration> Air-assisted regulator> Extremely smooth action, max. precision> Constant, regular air supply> Rapid discharge; instant pressure reduction> Aluminium body. CNC machined for toughness.> 1/2- inch inlet. Maximum flow: 2,500 L/min,outlets for 2 guns> 8u filter + high solid retention deflector + liquids> Unmanned discharge of liquids and impurities> Maximum painting quality. Retention of 99% of solids.> Breathable air> Retention of solvents> Waterborne paints> Stainless steel couplings> Wide surface filters, maximum flow with the minimummaintenance.> Machined aluminium vessels; maximum finish qualityand durability> Push connectors with stainlesssteel mechanisms and silicon-free gaskets.KEYS for the correctelection of the filterThe type and condition of the installed compressorand the quality of the air it is supplying must betaken into account for the election of a filtrationsystem to install.> If the air supply contains a lot of impurities, amodel 5050 (pre-filtered) air purifier shouldbe installed as a preventative measure.It is advisable to install this model after prefilteringthe general air network.> If greater air purity is required the purifierregulator with coalescent filter plus activecharcoal model 5300 can be installed.This model is employed:> If the air supplied by the compressor is clean,a model 5100 can be installed directly. Itwill eliminate the greatest quantity of liquidelements and particles bigger than 8 microns.> If greater air purity is required a model5200 Coalescent Purifier Regulator shouldbe installed, with which the following will beeliminated:· When it is necessary to eliminate oil,hydrocarbons or water in vapour form.· Organic fumes are present· To eliminate foul air.· To eliminate solid particles larger than 0.01microns and residual oil: maximum 0.003ppm.· If purified air is required for breathingequipment.www.sagola.com· Water and solid particles larger than 0.01microns· Water aerosols (C>0.01 mg/m 3 )· Oil aerosols (C>0.01 mg/m 3 )55