10.07.2015 Views

TX4600 - GME

TX4600 - GME

TX4600 - GME

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>TX4600</strong>• The microphone and all controls should be readilyaccessible and the loud speaker easily heard from thenormal steering or driving position. An extension speakercan be installed if required.• Components and currents in the transceiver createmagnetic fields. In marine installations, to avoidinterference to compasses, ships autopilot sensors etc,the <strong>TX4600</strong> should be mounted at least 300 mm fromsuch devices.Extension Speaker(optional)UHfAntenna<strong>TX4600</strong>INSTALLING THE UNITAfter choosing a location, hold the unit with the mountingbracket attached, to the desired position and mark thelocation with a pencil. Remove the mounting bracket fromthe radio and drill the mounting holes. Bolt or screw thebracket in place using hardware suitable for the mountingsurface. The unit is supplied with stainless steel screws,however, if the mounting surface is unsuitable for screwsyou may need to replace these with stainless steel bolts.Remember, in some applications the fixings for overheadmounted units may have to survive rough conditions.DC CONNECTIONSConnect the RED power lead to the positive (+) side of thebattery or to an accessory point in the vehicle’s fuse box.Connect the BLACk power lead to the negative (-) side ofthe battery or to a ground point in your vehicle.Radio remains on when Ignition Switch is OFFREDTo <strong>TX4600</strong>Radio turns ON and OFF with Ignition SwitchRED fuseTo <strong>TX4600</strong>BLACKfuseBLACKChassisChassisCar BatteryCar Battery+veAccIgnIgnition Switch+veAccIgnIgnition SwitchNoTe: The RED power lead is fitted with a 3 Amp fuse. Ifthe fuse blows, use only a standard 3 Amp (3AG) fuse asa replacement. Use of a higher rated fuse or a slow-blowtype could result in damage to your radio which would voidthe warrantyIf required, an extension speaker may be installed toimprove sound levels in noisy environments or in locationsfurther away from the steering or driving position. forlocations exposed to water we recommend the SPk45.for dry installations the SPk04 or SPk09 are suitableextension speakers.NoTe: The internal speaker continues to operate when theextension speaker is plugged in.PAGE 22 INSTRUCTION MANUAL <strong>TX4600</strong>

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!