Savannah Dresser Drawers - Mamas & Papas

ATTACHING THE TOP RAIL TO THE TOPStep 1Insert two dowels (A) into the holes in the edge ofthe top rail (1). You may need to use a light hammerto gently knock them fully into position.A1BStep 2Insert three long cams (B) into the top rail, ensuringthat the arrows on the cams are pointing towardsthe connecting holes.Step 3Screw seven cam studs (C) into the holes in theunderside of the top (2). Tighten them using a crossheadscrewdriver.C2Step 4Slide the top rail onto the fittings and push downfirmly until the rail touches the underside of thetop. Then tighten the cams, by turning themclockwise with a flat-head screwdriver.Note: The cams should face towards the back of thedresser when the top rail is fitted.– 4 –