2 - vonRoll hydro

More documents

Recommendations

Info

AbbreviationsDNNominal diameter of pipeDE Outside diameter of pipe as defined in EN 545 and ISO 2531DIEffective calculated pipe inside diameterDI = DE – 2eDMOutside diameter of sleeveTSleeve depth in mm, identical for pipes and adapter fittingse GWall thickness of centrifugally cast pipe made of ductile cast ironK9 according to EN 545 and ISO 2531 standardse PUR1Wall thickness of polyurethane inside lining according to manufacturers standardse PUR2Wall thickness of polyurethane outside coating = 0.9 mmeWall thickness of ducpur ® and ecopur ® K9 sleeve-coupled pipese = e G+ e PUR1+ e PUR2LPipe length in mmPFAOperating pressurePNConnection dimension equivalent to nominal pressure in barSubject to alteration without noticephone +41 62 388 14 00, fax +41 62 388 14 20, www.vonroll-hydro.ch, info@vonroll-hydro.ch1/10
Push-in joint products 2FigurePageducpur ® pressure pipes with double-chamber socket 2817 2/1.1ducpur ® pressure pipes with single-chamber socket 2815 2/1.1ecopur ® pressure pipes with double-chamber socket 2817 2/1.2ecopur ® pressure pipes with single-chamber socket 2815 2/1.2geopur ® sewage pipes with double-chamber socket 1817 2/1.32geopur ® sewage pipes with single-chamber socket 1815 2/1.3vonRollrock ® pressure pipeswith rock-protection coating ducpur ® 2816 2/2.1vonRollrock ® pressure pipeswith rock-protection coating ducpur ® 2819 2/2.1vonRollrock ® pressure pipeswith rock-protection coating ecopur ® 2816 2/2.2vonRollrock ® pressure pipeswith rock-protection coating ecopur ® 2819 2/2.2vonRollrock ® sewage pipeswith rock-protection coating geopur ® 1816 2/2.3vonRollrock ® sewage pipeswith rock-protection coating geopur ® 1819 2/2.390° -bend, MMQ 2820a.90 2/3.145° -bend, MMK 45 2822a.45 2/3.130° -bend, MMK 30 2823a.30 2/3.222° -bend, MMK 22 2824a.22 2/3.211° -bend, MMK 11 2825a.11 2/3.25° -bend, MMK 5 2826a.5 2/3.390° -bend, MQ 2820.90 2/4.145° -bend, MK 45 2822.45 2/4.130° -bend, MK 30 2823.30 2/4.122° -bend, MK 22 2824.22 2/4.111° -bend, MK 11 2825.11 2/4.2Socket-Tee, UA 2854 2/5.1Socket-Tee, MMB 2856 2/5.2Socket-Tee, MMA 2857 2/5.3-4
Page 1: Pressurised piping and fittingsfor
Page 5 and 6: IntroductionPiping systemsAs one of
Page 7 and 8: Ductile cast ironMaterial character
Page 9 and 10: Resistance to chemicals - Acidic or
Page 11 and 12: Permissible operating pressures for
Page 13: StandardsEN 545Pipes, adapter fitti
Page 17 and 18: Pressure pipe with push-in socketPr
Page 19 and 20: Sewage pipe with push-in socketSewa
Page 21 and 22: Pressure pipe with push-in socketPr
Page 23 and 24: Adapter fittings with push-in joint
Page 35 and 36: Push-in joint connectionsPressure p
Page 37 and 38: Push-in joint connectionsPressure p
Page 39 and 40: Accessories for push-in joint pipin
Page 45 and 46: Installation instructions for push-
Page 47 and 48: 7. Centring and alignment of push-i
Page 49 and 50: 8.6 Montage Assembly von of shorten
Page 51 and 52: Fit - Schubsicherungsring the thrus
Page 53 and 54: - Zentrieren analog Pkt. 7 und mit
Page 55: Flanged products 4FigurSeiteducpur
Page 58 and 59: Pressure pipe with flangesPressure
Page 64 and 65:
Pressure pipe with flangesPressure
Page 66 and 67:
Page 68 and 69:
Page 70 and 71:
Adapter fittings with flangesPressu
Page 72 and 73:
Page 74 and 75:
Page 76 and 77:
Page 78 and 79:
Page 80 and 81:
Page 82 and 83:
Page 84 and 85:
Page 86 and 87:
6. Remarks concerning the installat
Page 89 and 90:
Tapping clampsPressure pipes and ad
Page 91:
Planning and finishing work 6PageCu
Page 94 and 95:
6. Markings on push-in joint pipesT
Page 97 and 98:
RESICOAT ® RS Repair Material1. Us
Page 99 and 100:
Installation instructions forducpur
Page 101 and 102:
Information for planners and pipe f
Page 103 and 104:
3. Permissible pressures3.1 Pressur
Page 105 and 106:
4. Table of flanges for ductile cas
Page 107 and 108:
5.2 Dimensions for two spigot/socke
Page 109 and 110:
7.2 Chart for pressure losses in wa
Page 111:
8.1 Area of applicabilityIn the DVG
Page 115 and 116:
Transport and storageGuidelines:For
Page 118:
vonRoll hydrotec ltd.von roll-stras
show all

2 - vonRoll hydro

Create successful ePaper yourself

Delete template?

Save as template?