2 - vonRoll hydro

Adapter fittings with push-in jointsPressure pipes and adapter fittingsecofit ® adapter fittings (1 branch) with push-in jointsAdapter fittings made of ductile cast iron (EN-GJS) to EN 545 standard.Thick epoxy-resin coating (min. 250 µm) to DIN 3476 standardSingle-chamber socket (Fig. 2854 double-chamber)Pipes and adapter fittings – DN 400-600 with standard supporting collar – aredelivered with Tyton seal but without thrust-resisting ring.UNIVERSAL push-in joint tee, double-chamber (UA)Fig. 2854DN 1DN 2PN L h weightbar mm mm kgitem-no.suissetecTo factory standards100 50 10,16,25,40 176 100 20.0261000234.159100 100 10,16 176 100 23.0261002234.119125 50 10,16,25,40 173 110 24.0261003234.161125 100 10,16 173 110 25.0261005234.241150 50 10,16,25,40 170 120 27.0261007234.162150 100 10,16 170 120 28.0261009234.242200 50 10,16,25,40 148 145 38.0261012234.163200 100 10,16 163 145 38.0261014234.243Construction:Double-chamber.Supply includes the adapter fitting with sealing gaskets, stud bolts with nuts andprotective caps.Can be fitted with internal thrust-resisting ring (fig. 2807) or external thrust-resistingring (fig. 2806).Subject to alteration without noticephone +41 62 388 14 00, fax +41 62 388 14 20, www.vonroll-hydro.ch, info@vonroll-hydro.ch 2/5.1