Bel PRO 200 - Best Radar Detector

Overview of ProgrammingDetails of ProgrammingPress the REVIEW buttonto go from one categoryto the nextPILOT(Power-on indication)VOICEPOWER-ON SEQUENCEAUTOMUTECITY MODE SENSITIVITYBANDS* Factory Default SettingsTo reset your Pro200 to its originalfactory settings, press and hold the“CITY” and “BRT” buttons whileturning the power on. The Pro200’sdisplay will provide a Resetmessage, accompanied by an audiblealert, acknowledging the reset.Pilot HWYPilot HVoice ONVoice OFFPwrOn STDPwrOn FSTaMute ONaMute OFFCity STDCity LoXCity NoXBands DFTBands MOD12Press the CHANGE buttonto change your settingwithin a category* Full word: Highway or AutoScan or CityLetter: H or A or C* Voice alerts onVoice alerts off* Standard power-on sequenceFast power-on sequence* AutoMute onAutoMute off* Standard City mode sensitivityLow X band sensitivity in City ModeNo X band sensitivity in City Mode* Factory default settingsFactory default settings modifiedTurn bands “ON” or “OFF” bypressing the VOLUME/MUTE buttonPOP ON or OFF (default is off)SWS ON or OFF (default is off)TSR ON or OFF (default is on)Pilot (Power-on indication)NOTE: When you are using the Dark mode,the display will only show HD, AD, or CD(Highway-Dark, AutoScan-Dark, or City-Dark).Pilot HWY (Full description)In this setting, your Pro200 will display“Highway,” “City,” or “AutoScan” as its poweronindication. (factory default)Pilot H (Letter)In this setting, your Pro200 will display“H” for Highway, “C” for City, and “A” forAutoScan.VoiceVoice On (Voice announcements on)In this setting, all radar, laser, and SWSmessages (if programmed) will beannounced using a digital voice.Voice Off (Voice announcements off)In this setting, only the distinct audio tonewill be heard when a radar, Laser, or SWSmessage is detected.13Power-on SequencePwrOnSTD (Standard)In this setting, each time you turn on yourPro200, it will display “Pro200,” “Laser,” “Kaband,”“K-band,” “X-band,” “Safety,” followedby a brief X-band alert. (factory default)If any bands have been changed fromthe factory default settings, a double X-bandtone and corresponding message (i.e. “SWSON”), will alert you that one or more bandshave been changed.PwrOnFST (Fast power-on)In this setting, your Pro200 will provide asingle X-band tone. If any bands have beenchanged from the factory default settings,a double X-band tone and correspondingmessage (i.e. “SWS ON”), will alert you thatone or more bands have been changed.AutoMuteaMute ON (AutoMute on)In this setting, your Pro200’s audio alertswill initially be at the volume you set,but after a few seconds, the Pro200 willautomatically reduce the volume level,to keep you informed, but not annoyed.(factory default)aMuteOFF (AutoMute off)With AutoMute off, your Pro200’s audioalerts will remain at the volume you set forthe duration of the radar encounter.