Overview of ProgrammingDetails of ProgrammingPress the REVIEW buttonto go from one categoryto the nextPILOT(Power-on indication)VOICEPOWER-ON SEQUENCEAUTOMUTECITY MODE SENSITIVITYBANDS* Factory Default SettingsTo reset your Pro<strong>200</strong> to its originalfactory settings, press and hold the“CITY” and “BRT” buttons whileturning the power on. The Pro<strong>200</strong>’sdisplay will provide a Resetmessage, accompanied by an audiblealert, acknowledging the reset.Pilot HWYPilot HVoice ONVoice OFFPwrOn STDPwrOn FSTaMute ONaMute OFFCity STDCity LoXCity NoXBands DFTBands MOD12Press the CHANGE buttonto change your settingwithin a category* Full word: Highway or AutoScan or CityLetter: H or A or C* Voice alerts onVoice alerts off* Standard power-on sequenceFast power-on sequence* AutoMute onAutoMute off* Standard City mode sensitivityLow X band sensitivity in City ModeNo X band sensitivity in City Mode* Factory default settingsFactory default settings modifiedTurn bands “ON” or “OFF” bypressing the VOLUME/MUTE buttonPOP ON or OFF (default is off)SWS ON or OFF (default is off)TSR ON or OFF (default is on)Pilot (Power-on indication)NOTE: When you are using the Dark mode,the display will only show HD, AD, or CD(Highway-Dark, AutoScan-Dark, or City-Dark).Pilot HWY (Full description)In this setting, your Pro<strong>200</strong> will display“Highway,” “City,” or “AutoScan” as its poweronindication. (factory default)Pilot H (Letter)In this setting, your Pro<strong>200</strong> will display“H” for Highway, “C” for City, and “A” forAutoScan.VoiceVoice On (Voice announcements on)In this setting, all radar, laser, and SWSmessages (if programmed) will beannounced using a digital voice.Voice Off (Voice announcements off)In this setting, only the distinct audio tonewill be heard when a radar, Laser, or SWSmessage is detected.13Power-on SequencePwrOnSTD (Standard)In this setting, each time you turn on yourPro<strong>200</strong>, it will display “Pro<strong>200</strong>,” “Laser,” “Kaband,”“K-band,” “X-band,” “Safety,” followedby a brief X-band alert. (factory default)If any bands have been changed fromthe factory default settings, a double X-bandtone and corresponding message (i.e. “SWSON”), will alert you that one or more bandshave been changed.PwrOnFST (Fast power-on)In this setting, your Pro<strong>200</strong> will provide asingle X-band tone. If any bands have beenchanged from the factory default settings,a double X-band tone and correspondingmessage (i.e. “SWS ON”), will alert you thatone or more bands have been changed.AutoMuteaMute ON (AutoMute on)In this setting, your Pro<strong>200</strong>’s audio alertswill initially be at the volume you set,but after a few seconds, the Pro<strong>200</strong> willautomatically reduce the volume level,to keep you informed, but not annoyed.(factory default)aMuteOFF (AutoMute off)With AutoMute off, your Pro<strong>200</strong>’s audioalerts will remain at the volume you set forthe duration of the radar encounter.
Details of ProgrammingTechnical DetailsCity Mode SensitivityCity STD (Standard)In this setting, when you put your Pro<strong>200</strong>in the City mode, X-band sensitivity issignificantly reduced, to reduce annoyancefrom X-band intrusion alarms and motionsensors. (factory default)City LoX (Low X band sensitivity)In this setting, when you put your Pro<strong>200</strong>in the City mode, X-band sensitivity isreduced more than the standard setting.This will reduce X-band alarms from othersources even further, but also significantlyreduces range to X-band traffic radar.City NoX (No X-band sensitivity)In this setting, when you put your Pro<strong>200</strong>in the City mode, Pro<strong>200</strong> will not respondto any X-band signals.WARNING: Only choose this settingif you are absolutely certain thatthere are no X-band traffic radarunits where you drive.BandsBandsDFTIn this setting, all North American radar andlaser frequencies are monitored. This is thefactory setting and it is recommended thatyou use your Pro<strong>200</strong> in this mode.BandsMODIn this setting, your Pro<strong>200</strong> will warn youwith an audible alert, and associated textmessage stating which band has changedfrom the original factory setting (i.e. “SWSON”). This warning is displayed during thestart up sequence (standard or fast).Features and SpecificationsOperating Bands• X-band 10.525 GHz ± 25 MHz• K-band 24.150 GHz ± 100 MHz• Ka-band 34.700 GHz ± 1300 MHz• Laser 904nm, 33 MHz bandwidth<strong>Radar</strong> Receiver / <strong>Detector</strong> Type• Superheterodyne, VTO• Scanning Frequency Discriminator• Digital Signal Processing (DSP)Laser Detection• Quantum Limited Video Receiver• Multiple Laser Sensor DiodesDisplay Type• 280 LED Alphanumeric• Bar Graph• 3 Levels of Brightness,plus Dark ModePower Requirement• 12VDC, Negative Ground• Power cord (included)Sensitivity Control• Highway, AutoScan and CityAuto Calibration CircuitryVG2 ImmunityDimensions (Inches)• 1.25 H x 2.75 W x 4.75 LNOTE: These settings only applywhen the Pro<strong>200</strong> is operated inCity mode. X-band sensitivity is notaffected when used in “AutoScan”or “Highway” modes.Programmable Features• Power-On Indication• Voice Alerts• Power-On Sequence• AutoMute• City Mode Sensitivity• Bands14 15