Tornier Fracture Surgical Technique

More documents

Recommendations

Info

16. Assembling the implant:➔ AssemblingThe assemby of the implant is done by impactionof the prosthetic head onto the stem.The assembly is secured by a morse taper system.The prosthetic head is positioned on the stem, aligningthe offset number (index 1 or 8) with superior aspectof the stem.➔ ImpactionThe prosthesis is positionedon the impaction support.The blocking screw of the impaction supportis tightened with a 4.5 mm screwdriverto secure the prosthesis during impaction.Amallet is used to firmly engage the headon to the stem taper.2116
17. Cementing the implant:After placement of a cement restrictor,the canal is dried, and cement is injectedusing a large syringe.The implant is attached to theprosthesis holder in the same manneras the trial stem.The prosthesis is introduced intothe medullary canal as the prosthesisholder is introduced into the ruler,then tightening knob n° 3.317
Page 4: VII.Metodología y estrategias de e
Page 7: THE AEQUALIS-FRACTURE SOLUTIONThe A
Page 11 and 12: 5. Tenotomy and excision of the lon
Page 13 and 14: 9. Choice of trial prosthesis and a
Page 15 and 16: 11. Implantation and reduction of t
Page 17: 13. Reduction of the greater tubero
Page 21 and 22: 19. Removal of two cancellous bone
Page 23 and 24: 23. Two horizontal cerclage sutures
Page 25 and 26: 25. Vertical tension band sutures o
Page 27 and 28: POST OPERATIVE REHABILITATIONPostop
Page 29 and 30: 342ASSEMBLY INSTRUCTIONSRIGHT ARM1F
Page 31 and 32: Ref. YKAD07INSTRUMENTATION(Common i

Tornier Fracture Surgical Technique

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?