Manual - FuturePlus Systems

• Loop-back (data received on an input port for one channel is“looped back” and transmitted on the output port for thesame channel).Any combination of these options can be used to analyze normaldata with the Logic Analysis System, “snoop” on the data withother tools, or to implement some error injection tests. For moreinformation on selecting a configuration option see the sectionSetting Configuration Switches on page 22.Not implemented on FS430050ohm75ohmRECEIVERswitchswitchClockRegeneratorGBICswitchGBICClockRegeneratorswitchswitchRECEIVER75ohmNot implemented on FS430050ohmThe figures below show two possible ways of using the FS4300,the first to monitor traffic into and out of a Fibre Channel node,the second to monitor traffic on two independent ports.Fibre Channel NodeRTFS4300 configuredfor Feed ThroughRRTChannel 2FS4300Channel 1TRTFibre Channel NodeFigure 2: Monitoring traffic through a node.16